一:下图为gc0307引脚说明
AVDD25 | Power | Analog Power,2.5V,internal generated,connect to ground via 0.1μF or 1uF capacitor |
VREF | Power | Reference voltage, connect to ground via 0.1μF capacitor |
SBDA | I/O | Serial Bus Data I/O |
SBCL | Input | Serial Bus Clock In |
D7 | Output | YUV/RGB Data output bit[7] |
GND | Ground | Analog/Digital ground |
PWDN | Input | 0:normal working mode 1:power down mode |
HSYNC | output | Horizontal sync signal output |
D6 | output | YUV/RGB Data output bit[6] |
D5 | output | YUV/RGB Data output bit[5] |
VSYNC | output | Vertical (frame) sync signal output |
D0 | output | YUV/RGB Data output bit[0] |
D3 | output | YUV/RGB Data output bit[3] |
D4 | output | YUV/RGB Data output bit[4] |
PCLK | output | Output PCLK |
DVDD28 | Power | Power , connect to ground via 0.1μF capacitor |
D1 | Output | YUV/RGB Data output bit[1] |
D2 | Output | YUV/RGB Data output bit[2] |
DVDD18 | Power | 1.8V power for digital core, internal generated, connect to ground via 0.1μF or 1uF capacitor |
IN_CLK | input | Master clock input |
二:设置iic
三:用iic将gc0307寄存器配置好
四:Pclk、hs、vs就有输出,D0-D7有数据输出,就可以得到采集的数据