nginx+keepalived集群搭建-主备

看到代码头都是大的

已于 2024-04-10 14:11:28 修改

阅读量231

点赞数

文章标签： nginx linux

于 2023-09-18 17:25:50 首次发布

本文链接：https://blog.csdn.net/ym5209999/article/details/132983080

版权

nginx集群

1. nginx部署

单机部署可参考：https://blog.csdn.net/ym5209999/article/details/119897237

2. keepalived安装

[root@nginx1 ~]# yum -y install keepalived

3. keepalived配置

3.1 安装完成后，默认配置文件位于：/etc/keepalived，默认配置如下：

keepalived.conf

! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id LVS_DEVEL
   vrrp_skip_check_adv_addr
   vrrp_strict
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.200.16
        192.168.200.17
        192.168.200.18
    }
}

virtual_server 192.168.200.100 443 {
    delay_loop 6
    lb_algo rr
    lb_kind NAT
    persistence_timeout 50
    protocol TCP

    real_server 192.168.201.100 443 {
        weight 1
        SSL_GET {
            url {
              path /
              digest ff20ad2481f97b1754ef3e12ecd3a9cc
            }
            url {
              path /mrtg/
              digest 9b3a0c85a887a256d6939da88aabd8cd
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
}

virtual_server 10.10.10.2 1358 {
    delay_loop 6
    lb_algo rr 
    lb_kind NAT
    persistence_timeout 50
    protocol TCP

    sorry_server 192.168.200.200 1358

    real_server 192.168.200.2 1358 {
        weight 1
        HTTP_GET {
            url { 
              path /testurl/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            url { 
              path /testurl2/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            url { 
              path /testurl3/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }

    real_server 192.168.200.3 1358 {
        weight 1
        HTTP_GET {
            url { 
              path /testurl/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334c
            }
            url { 
              path /testurl2/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334c
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
}

virtual_server 10.10.10.3 1358 {
    delay_loop 3
    lb_algo rr 
    lb_kind NAT
    persistence_timeout 50
    protocol TCP

    real_server 192.168.200.4 1358 {
        weight 1
        HTTP_GET {
            url { 
              path /testurl/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            url { 
              path /testurl2/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            url { 
              path /testurl3/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }

    real_server 192.168.200.5 1358 {
        weight 1
        HTTP_GET {
            url { 
              path /testurl/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            url { 
              path /testurl2/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            url { 
              path /testurl3/test.jsp
              digest 640205b7b0fc66c1ea91c463fac6334d
            }
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
}

3.2 按实际情况修改keepalived.conf

主

! Configuration File for keepalived

global_defs {
	# 路由ID，当前主机标识，必须唯一
   router_id LVS_DEVEL_144
   script_user root
   enable_script_security
}

vrrp_instance VI_1 {
	# 状态，可配置内容为：MASTER/BACKUP
    state MASTER
	# 网卡名称
    interface ens192
	# 主备节点需保持一致
    virtual_router_id 51
	# 优先级，当主节点宕机后，优先级最高的成为主节点
    priority 100
	# 主备同步时间间隔 
    advert_int 1
	# 认证授权密码
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.2.198 # 虚拟IP
    }
}

备

! Configuration File for keepalived

global_defs {
	# 路由ID，当前主机标识，必须唯一
   router_id LVS_DEVEL_62
   script_user root
   enable_script_security
}

vrrp_instance VI_1 {
	# 状态，可配置内容为：MASTER/BACKUP
    state BACKUP
	# 网卡名称
    interface ens192
	# 主备节点需保持一致
    virtual_router_id 51
	# 优先级，当主节点宕机后，优先级最高的成为主节点
    priority 80
	# 主备同步时间间隔 
    advert_int 1
	# 认证授权密码
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.2.198 # 虚拟IP
    }
}

4. 启动验证

# 启动nginx
[root@nginx1 ~]# /apps/nginx/sbin/nginx –c /apps/nginx/conf/nginx.conf

# 启动keepalived
[root@nginx1 ~]# systemctl start keepalived

1）启动完成后，查看主节点IP地址，在ens192下生成虚拟IP后，即可访问：192.168.2.198查看效果（在配置文件中，主节点priority 值大于备节点，故会生成在主节点）；
2）将主节点keepalived服务结束后，再次访问192.168.2.198，会自动切换到备节点

5. 优化

当nginx服务器挂掉之后，由于keepalived服务保持正常，故VIP依旧保留在进程异常的服务器上，导致前端无法自动切换，故需要对配置进行优化。
优化点：定期检测nginx进程活性，若nginx服务不存在，则重启nginx服务，若无法启动，则将keepalived进程结束，使之正常切换到正常的keepalived。
nginx活性检测脚本：
nginx_check.sh

#!/bin/bash
A=`ps -C nginx --no-header |wc -l`   #查看是否有进程，把值赋给变量A
if [ $A -eq 0 ];then    #如果没有进程值则为0
   /apps/nginx/sbin/nginx –c /apps/nginx/conf/nginx.conf  #nginx的启动路径
    sleep 5   #尝试启动nginx等待5秒
	B=`ps -C nginx --no-header |wc -l`
    if [ $B -eq 0 ];then    #在查看一下是否有进程，没有则结束，杀掉keepalived
        systemctl stop keepalived
    fi
fi

将脚本上传至主、备服务器：/etc/keepalived/目录下，并授权（不能授权为777！！！）
chmod -R 755 nginx_check.sh
建议在启动验证的时候，打印系统日志，同步查看：tail -f /var/log/messages
主

! Configuration File for keepalived

global_defs {
	# 路由ID，当前主机标识，必须唯一
   router_id LVS_DEVEL_144
   script_user root
   enable_script_security
}

# ----------------------- 新增点 ------------------------
vrrp_script nginxcheck {
   script "/etc/keepalived/nginx_check.sh"
   interval 10
}
# ----------------------- 新增点 ------------------------

vrrp_instance VI_1 {
	# 状态，可配置内容为：MASTER/BACKUP
    state MASTER
	# 网卡名称
    interface ens192
	# 主备节点需保持一致
    virtual_router_id 51
	# 优先级，当主节点宕机后，优先级最高的成为主节点
    priority 100
	# 主备同步时间间隔 
    advert_int 1
	# 认证授权密码
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.2.198
    }
    # ----------------------- 新增点 ------------------------
	track_script {
		nginxcheck
	}
	# ----------------------- 新增点 ------------------------
}

备

! Configuration File for keepalived

global_defs {
	# 路由ID，当前主机标识，必须唯一
   router_id LVS_DEVEL_62
   script_user root
   enable_script_security
}

# ----------------------- 新增点 ------------------------
vrrp_script nginxcheck {
   script "/etc/keepalived/nginx_check.sh"
   interval 10
}
# ----------------------- 新增点 ------------------------

vrrp_instance VI_1 {
	# 状态，可配置内容为：MASTER/BACKUP
    state BACKUP
	# 网卡名称
    interface ens192
	# 主备节点需保持一致
    virtual_router_id 51
	# 优先级，当主节点宕机后，优先级最高的成为主节点
    priority 80
	# 主备同步时间间隔 
    advert_int 1
	# 认证授权密码
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.2.198
    }
    # ----------------------- 新增点 ------------------------
	track_script {
		nginxcheck
	}
	# ----------------------- 新增点 ------------------------
}