IEEE 802.3-2018 中文目录

最新版为2018版,共有8个section,126个clause,120个annex,共5600页,总大小47.3M。

10M以太网:8-20章

100M以太网:21-33章

1000M以太网:34-43章

10G以太网:44-77章

节能以太网:78-79章

40G/100G以太网:80-95章

200G/400G以太网:116-124章

2.5G/5G以太网:125-126章


Section ONE

包含第1章~第20章,附录A~H,以及附录4A。

1. Interoduction

第一章:标准介绍

2. Media Access Control (MAC) service specification

第二章:MAC服务规范

3. Media Access Control (MAC) frame and packet specifications

第三章:MAC帧和报文规范

4. Media Access Control

第四章:介质访问控制

5. Layer Management

第五章:层间管控

6. Physical Signaling (PLS) service specifications

第六章:PLS服务规范

7. Physical Signaling (PLS) and Attachment Unit Interface (AUI) specifications

第七章:PLS与AUI规范

8. Medium Attachment Unit and baseband medium specifications, type 10BASE5

第八章:介质连接单元与基带信号媒介规范——典型:10BASE5

9. Repeater unit for 10Mb/s baseband networks

第九章:10Mb/s基带网络中继单元

10. Medium attachment unit and baseband medium specifications, type 10BASE2

第十章:介质连接单元与基带信号媒介规范——典型:10BASE2

11. Broadband medium attachment unit and broadband medium specifications, type 10BROAD36

第十一章:宽带介质连接单元与宽带介质规范——典型:10BROAD36

12. Physical signaling, medium attachment, and baseband medium specifications, type 1BASE5

第十二章:物理信号,介质连接,基带介质规范——典型:1BASE5

13. System considerations for multisegment 10 Mb/s baseband networks

第十三章:关于multisegment 10 Mb/s基带网络的思考

14. Twisted-pair medium attachment unit (MAU) and baseband medium, type 10BASE-T including type 10BASE-Te

第十四章:介质连接的双绞线基带媒介——典型:10BASE-T (包括 10BASE-Te)

15. Fiber optic medium and common elements of medium attachment units and star, type 10BASE-F

第十五章:光纤媒介与介质连接的公共设施单元——典型:10BASE-F

16. Fiber optic passive star and medium attachment unit, type 10BASE-FP

第十六章:无源光纤与介质连接单元——典型:10BASE-FP

17. Fiber optic medium attachment unit, type 10BASE-FB

第十七章:光纤介质连接单元——典型:10BASE-FB

18. Fiber optic medium attachment unit, type 10BASE-FL

第十八章:光纤介质连接单元——典型:10BASE-FL

19. Layer Management for 10 Mb/s baseband repeaters

第十九章:10 Mb/s 基带中继器的层间管理

20. Layer Management for 10 Mb/s baseband medium attachment units

第二十章:10 Mb/s 基带介质连接单元的层间管理


Section TWO

包含第21章~第33章,附录22A~33A。

21. Introduction to 100 Mb/s baseband networks, type 100BASE-T

第二十一章:100 Mb/s 基带网络介绍——典型:100BASE-T

22. Reconciliations Sublayers (RS) and Media Independent Interface (MII)

第二十二章:调和子层(RS)和介质无关接口(MII)

23. Physical Coding Sublayers (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 100BASE-T4

第二十三章:物理编码子层(PCS)和物理介质连接子层(PMA)以及基带介质——典型:100BASE-T4

24. Physical Coding Sublayers (PCS) and Physical Medium Attachment (PMA) sublayer, type 100BASE-X

第二十四章:物理编码子层(PCS)和物理介质连接子层(PMA)以及基带介质——典型:100BASE-X

25. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100BASE-TX

第二十五章:物理介质相关子层(PMD)和基带介质——典型:100BASE-TX

26. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100BASE-FX

第二十六章:物理介质相关子层(PMD)和基带介质——典型:100BASE-FX

27. Repeater for 100Mb/s baseband networks

第二十七章:100 Mb/s基带网络中继单元

28. Physical Layer link signaling for Auto-Negotiation on twisted pair

第二十八章:双绞线自动协商的物理层连接信号

29. System considerations for multisegment 100BASE-T networks

第二十九章:关于100BASE-T网络的思考

30. Management

第三十章:管控

31. MAC Control

第三十一章:MAC控制

32. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 100BASE-T2

第三十二章:物理编码子层(PCS)和物理介质连接子层(PMA)以及基带介质——典型:100BASE-T2

33. Data Terminal Equipment (DTE) Power via Media Dependent Interface (MDI)

第三十三章:利用介质相关接口(MDI)实现数据终端设备供电


Section THREE

包含第34章~第43章,附录36A~43C。

34. Introduction to 1000Mb/s baseband network

第三十四章:1000 Mb/s 基带网络介绍

35. Reconciliation Sublayer (RS) and Gigabit Media Independent Interface (GMII)

第三十五章:调和子层(RS)和吉比特介质无关接口(GMII)

36. Physical Coding Sublayer (PCS) and Physical Medium Atachment (PMA) sublayer, type 1000BASE-X

第三十六章:物理编码子层(PCS)和物理介质连接子层(PMA)——典型:1000BASE-X

37. Auto-Negotiation function, type 1000BASE-X

第三十七章:自动协商功能——典型:1000BASE-X

38. Physical Medium Dependent (PMD) sublayer and baseband medium, type 1000BASE-LX (long wavelength laser) and 1000BASE-SX (short wavelength laser)

第三十八章:物理介质相关子层(PMD)和基带介质——典型:1000BASE-LX和1000BASE-SX

39. Physical Medium Dependent (PMD) sublayer and baseband medium, type 1000BASE-CX (short-haul copper)

第三十九章:物理介质相关子层(PMD)和基带介质——典型:1000BASE-CX

40. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 1000BASE-T

第四十章:物理编码子层(PCS)和物理介质连接子层(PMA)以及基带介质——典型:1000BASE-T

41. Repeater for 1000 Mb/s baseband networks

第四十一章:1000 Mb/s基带网络中继单元

42. System considerations for multisegment 1000 Mb/s networks

第四十二章:关于1000 Mb/s网络的思考

43. Content moved to IEEE Std 802.1AX-2008

第四十三章:转移至IEEE Std 802.1AX-2008的内容


Section FOUR

包含第44章~第55章,附录44A~55B。

44. Introduction to 10 Gb/s baseband network

第四十四章:10 Gb/s 基带网络介绍

45. Management Data Input/Output (MDIO) Interface

第四十五章:管理数据的输入/输出接口(MDIO)

46. Reconciliation Sublayer (RS) and 10 Gigabit Media Independent Interface (VGMII)

第四十六章:调和子层与10G 介质无关接口(VGMII)

47. XGMII Extender Sublayer (XGXS) and 10 Gigabit Attachment Unit Interface (XAUI)

第四十七章:XGMII扩展子层(XGXS)与10G 介质连接单元接口

48. Physical Coding Sublayer (PCS) and Physical Medium Attachment (PMA) sublayer, type 10GBASE-X

第四十八章:物理编码子层(PCS)与物理介质连接子层(PMA)——典型:10GBASE-X

49. Physical Coding Sublayer (PCS) for 64B/66B, type 10GBASE-R

第四十九章:物理编码子层(PCS)的64B/66B编码——典型:10GBASE-R

50. WAN Interface Sublayer (WIS), type 10GBASE-W

第五十章:WAN接口子层(WIS)——典型:10GBASE-W

51. Physical Medium Attachment (PMA) sublayer, type Serial

第五十一章:物理介质连接子层(PMA)

52. Physical Medium Dependent (PMD) sublayer and baseband medium, type 10GBASE-S (short wavelength serial), 10GBASE-L (long wavelength serial), and 10GBASE-E (extra long wavelength serial)

第五十二章:物理介质相关子层(PMD)与基带介质——典型:10GBASE-S、10GBASE-L、10GBASE-E

53. Physical Medium Dependent (PMD) sublayer and baseband medium, type 10GBASE-LX

第五十三章:物理介质相关子层(PMD)与基带介质——典型:10GBASE-LX

54. Physicla Medium Dependent (PMD) sublayer and baseband medium, type 10GBASE-CX4

第五十四章:物理介质相关子层(PMD)与基带介质——典型:10GBASE-CX4

55. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 10GBASE-T

第五十五章:物理编码子层(PCS),物理介质连接子层(PMA)与基带介质——典型:10GBASE-T


Section FIVE

包含第56章~第77章,附录57A~76A。

56. Introduction to Ethernet for subscriber access networks

第五十六章: 用户接入以太网介绍

57. Operations, Administration, and Maintenance (OAM)

第五十七章:运营、管理、维护(OAM)

58. Physical Medium Dependent (PMD) sublayer and medium, type 100BASE-LX10 (long wavelength) and 100BASE-BX10 (Bi-Directional long wavelength)

第五十八章:物理介质相关子层(PMD)与介质——典型100GBASE-LX10、100GBASE-BX10

59. Physical Medium Dependent (PMD) sublayer and medium, type 1000BASE-LX10 (long wavelength) and 1000BASE-BX10 (Bi-Directional long wavelength)

第五十九章:物理介质相关子层(PMD)与介质——典型1000GBASE-LX10、1000GBASE-BX10

60. Physical Medium Dependent (PMD) sublayer and medium, type 1000BASE-PX (long wavelength passive optical networks)

第六十章:物理介质相关子层(PMD)与介质——典型1000GBASE-PX

61. Physical Coding Sublayer (PCS), Transmission Convergence (TC) sublayer, and common specifications, type 10PASS-TS and type 2BASE-TL

第六十一章:物理编码子层(PCS),传送汇聚子层(TC)与通用规范——典型10PASS-TS、2BASE-TL

62. Physical Medium Attachment (PMA) and Physical Medium Dependent (PMD), type 10PASS-TS

第六十二章:物理介质连接子层(PMA)与物理介质相关子层(PMD)——典型:10PASS-TS

63. Physical Medium Attachment (PMA) and Physical Medium Dependent (PMD), type 2BASE-TL

第六十三章:物理介质连接子层(PMA)与物理介质相关子层(PMD)——典型:2BASE-TL

64. Multipoint MAC Control

第六十四章:多点MAC控制

65. Extensions of the Reconciliation Sublayer (RS) and Physical Coding Sublayer (PCS) / Physical Medium Attachment (PMA) for 1000BASE-X for multipoint links and forward error correction

第六十五章:多点连接与前向纠错的1000BASE-X的调和子层(RS)扩展与物理编码子层(PCS)/物理介质连接子层(PMA)

66. Extensions of the 10 Gb/s Reconciliation Sublayer (RS), 100BASE-X PHY, and 1000BASE-X PHY for unidirectional transport

第六十六章:单向传送的10 Gb/s 调和子层(RS)、100BASE-X物理层、1000BASE-X物理层的扩展

67. System considerations for Ethernet subscriber access networks

第六十七章:以太接入网络的系统考虑

68. Physical medium dependent (PMD) sublayer, type 10GBASE-LRM

第六十八章:物理介质无关子层(PMD)——典型:10GBASE-LRM

69. Introduction to Ethernet operation over electrical backplanes

第六十九章:关于以太电层背板运行的介绍

70. Physical Medium Dependent sublayer and baseband medium, type 1000BASE-KX

第七十章:物理介质相关子层(PMD)与基带介质——典型:1000BASE-KX

71. Physical Medium Dependent sublayer and baseband medium, type 10GBASE-KX4

第七十一章:物理介质相关子层(PMD)与基带介质——典型:10GBASE-KX4

72. Physical Medium Dependent sublayer and baseband medium, type 10GBASE-KR

第七十二章:物理介质相关子层(PMD)与基带介质——典型:10GBASE-KR

73. Auto-Negotiation for backplane and copper cable assembly

第七十三章:电层背板与铜缆组件的自动协商

74. Forward Error Correction (FEC) sublayer for BASE-R PHYs

第七十四章:BASE-R物理层的前向纠错编码子层(FEC)

75. Physical Medium Dependent (PMD) sublayer and medium for passive optical networks, type 10GBASE-PR and10/1GBASE-PRX

第七十五章:面向无源光网络的物理介质相关子层(PMD)与介质——典型:10GBASE-PR、10/1GBASE-PRX

76. Reconciliation Sublayer, Physical Coding Sublayer, and Physical Media Attachment for 10G-EPON

第七十六章:10G-EPON的调和子层(RS)、物理编码子层(PCS)与物理介质连接子层(PMA)

77. Multipoint MAC Control for 10G-EPON

第七十七章:10G-EPON的多点MAC控制


Section SIX

包含第78章~第95章,附录83A~93A。

78. Energy-Efficient Ethernet (EEE)

第七十八章:节能以太网(EEE)

79. IEEE 802.3 Organizationally Specific Link Layer Discovery Protocol (LLDP) type, length, and value (TLV) information elements

第七十九章:IEEE 802.3 链路层发现协议(LLDP)的类型、长度、值(TLV)信息部分

80. Introduction to 40 Gb/s and 100 Gb/s networks

第八十章:40 Gb/s 、100 Gb/s网络介绍

81. Reconciliation Sublayer (RS) and Media Independent Interface for 40 Gb/s and 100 Gb/s operation (XLGMII and CGMII)

第八十一章:调和子层(RS)与40Gb/s、100Gb/s的介质无关接口(XLGMII、CGMII)

82. Physical Coding Sublayer (PCS) for 64B/66B, type 40GBASE-R and 100GBASE-R

第八十二章:物理编码子层(PCS)的64B/66B编码——典型:40GBASE-R、100GBASE-R

83. Physical Medium Attachment (PMA) sublayer, type 40GBASE-R and 100GBASE-R

第八十三章:物理介质连接子层(PMA)——典型:40GBASE-R、100GBASE-R

84. Physical Medium Dependent (PMD) sublayer and baseband medium, type 40GBASE-KR4

第八十四章:物理介质相关子层(PMD)与基带介质——典型:40GBASE-KR4

85. Physical Medium Dependent (PMD) sublayer and baseband medium, type 40GBASE-CR4 and 100GBASE-CR10

第八十五章:物理介质相关子层(PMD)与基带介质——典型:40GBASE-CR4、100GBASE-CR10

86. Physical Medium Dependent (PMD) sublayer and medium, type 40GBASE-SR4 and 100GBASE-SR10

第八十六章:物理介质相关子层(PMD)与基带介质——典型:40GBASE-SR4、100GBASE-SR10

87. Physical Medium Dependent (PMD) sublayer and medium, type 40GBASE-LR4 and 40GBASE-ER4

第八十七章:物理介质相关子层(PMD)与基带介质——典型:40GBASE-LR4、40GBASE-ER4

88. Physical Medium Dependent (PMD) sublayer and medium, type 100GBASE-LR4 and 100GBASE-ER4

第八十八章:物理介质相关子层(PMD)与基带介质——典型:100GBASE-LR4、100GBASE-ER4

89. Physical Medium Dependent (PMD) sublayer and medium, type 40GBASE-FR

第八十九章:物理介质相关子层(PMD)与基带介质——典型:40GBASE-FR

90. Ethernet support for time synchronization protocols

第九十章:以太网对事件同步协议的支持

91. Reed-Solomon Forward Error Correvtion (RS-FEC) sublayer for 100GBASE-R PHYs

第九十一章:100GBASE-R物理层中的RS前向纠错子层(RS-FEC)

92. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100GBASE-CR4

第九十二章:物理介质相关子层(PMD)与基带介质——典型:100GBASE-CR4

93. Physical Medium Dependent (PMD) sublayer and baseband medium, type 100GBASE-KR4

第九十三章:物理介质相关子层(PMD)与基带介质——典型:100GBASE-KR4

94. Physical Medium Attachment (PMA) sublayer, Physical Medium Dependent (PMD) sublayer, and baseband medium, type 100GBASE-KP4

第九十四章:物理介质连接子层(PMA)、物理介质相关子层(PMD)与基带介质——典型:100GBASE-KP4

95. Physicla Medium Dependent (PMD)  sublayer and medium, type 100GBASE-SR4

第九十五章:物理介质相关子层(PMD)与基带介质——典型:100GBASE-SR4


Section SEVEN

包含第96章~第115章,附录97A~115A。

96. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 100BASE-T1

第九十六章:物理编码子层(PCS)、物理介质连接子层(PMA)与基带介质——典型:100BASE-T1

97. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer and baseband medium, type 1000BASE-T1

第九十七章:物理编码子层(PCS)、物理介质连接子层(PMA)与基带介质——典型:1000BASE-T1

98. Auto-Negotiation for single differential-pair media

第九十八章:单极性差分介质的自动协商

99. MAC Merge sublayer

第九十九章:MAC融合子层

100. Physical Medium Dependent (PMD) sublayer, and medium for coaxial distribution networks, type 10GPASS-XR

第一百章:物理介质相关子层(PMD)、同轴线缆介质的分布式网络——典型:10GPASS-XR

101. Reconciliation Sublayer, Physical Coding Sublayer, and Physical Media Attachment for EPoC

第一百零一章:调和子层(RS)、物理编码子层(PCS)与EPoC的物理介质连接

102. EPoC PHY Link

第一百零二章:EPoC 物理层链路

103. Multipoint MAC Control for EPoC

第一百零三章:EPoC的多点MAC控制

104. Power over Data Lines (PoDL) of Single Balanced Twisted-Pair Ethernet

第一百零四章:单平衡的双绞线以太网数据线供电

105. Introduction to 25 Gb/s networks

第一百零五章:25 Gb/s 网络介绍

106. Reconciliation Sublayer (RS) and Media Independent Interface (25GMII) for 25 Gb/s operation

第一百零六章:调和子层(RS)与25 Gb/s 的介质无关接口(25GMII)

107. Physical Coding Sublayer (PCS) for 64B/66B, type 25GBASE-R

第一百零七章:物理编码子层(PCS)的64B/66B编码——典型:25GBASE-R

108. Reed-Solomon Forward Error Correction (RS-FEC) sublayer for 25GBASE-R PHYs

第一百零八章:25GBASE-R物理层中的RS前向纠错子层(RS-FEC)

109. Physical Medium Attachment (PMA) sublayer, type 25GBASE-R

第一百零九章:物理介质连接子层(PMA)——典型:25GBASE-R

110. Physical Medium Dependent (PMD) sublayer and baseband medium, type 25GBASE-CR and 25GBASE-CR-S

第一百一十章:物理介质相关子层(PMD)与基带介质——典型:25GBASE-CR、25GBASE-CR-S

111. Physical Medium Dependent (PMD) sublayer and baseband medium, type 25GBASE-KR and 25GBASE-KR-S

第一百一十一章:物理介质相关子层(PMD)与基带介质——典型:25GBASE-KR、25GBASE-KR-S

112. Physical Medium Dependent (PMD) sublayer and medium, type 25GBASE-SR

第一百一十二章:物理介质相关子层(PMD)与基带介质——典型:25GBASE-SR

113. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer, and baseband medium, type 25GBASE-T and 40GBASE-T

第一百一十三章:物理编码子层(PCS)、物理介质连接子层(PMA)与基带介质——典型:25GBASE-T、40GBASE-T

114. Physical Medium Dependent (PMD) sublayer and medium, type 25GBASE-LR and 25GBASE-ER

第一百一十四章:物理介质相关子层(PMD)与基带介质——典型:25GBASE-LR、25GBASE-ER

115. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer, and Physical Medium Dependent(PMD) sublayer, types 1000BASE-RHA, 1000BASE-RHB, and 1000BASE-RHC

第一百一十五章:物理编码子层(PCS)、物理介质连接子层(PMA)、物理介质相关子层(PMD)——典型:1000BASE-RHA、1000BASE-RHB、1000BASE-RHC


Section EIGHT

包含第116章~第126章,附录119A~120E。

116. Introduction to 200 Gb/s and 400 Gb/s networks

第一百一十六章:200 Gb/s、400 Gb/s 网络介绍

117. Reconciliation Sublayer (RS) and Media Independent Interface for 200 Gb/s and 400 Gb/s operation (200GMII and 400GMII)

第一百一十七章:200 Gb/s、400 Gb/s 网络的调和子层(RS)和介质无关接口(200GMII、400GMII)

118. 200GMII Extender, 400GMII Extender, 200GMII Extender Sublayer (200GXS), and 400GMII Extender Sublayer (400GXS)

第一百一十八章:200GMII扩展器、400GMII扩展器、200GMII扩展子层(200GXS)、400GMII扩展子层(400GXS)

119. Physical Coding Sublayer (PCS) for 64B/66B, type 200GBASE-R and 400GBASE-R

第一百一十九章:物理编码子层(PCS)的64B/66B编码——典型:200GBASE-R、400GBASE-R

120. Physical Medium Attachment (PMA) sublayer, type 200GBASE-R and 400GBASE-R

第一百二十章:物理介质连接子层(PMA)——典型:200GBASE-R、400GBASE-R

121. Physical Medium Dependent (PMD) sublayer and medium, type 200GBASE-DR4

第一百二十一章:物理介质相关子层(PMD)与物理介质——典型:200GBASE-DR4

122. Physical Medium Dependent (PMD) sublayer and medium, type 200GBASE-FR4, 200GBASE-LR4, 400GBASE-FR8, and 400GBASE-LR8

第一百二十二章:物理介质相关子层(PMD)与物理介质——典型:200GBASE-FR4、200GBASE-LR4、400GBASE-FR8、400GBASE-LR8

123. Physical Medium Dependent (PMD) sublayer and medium, type 400GBASE-SR16

第一百二十三章:物理介质相关子层(PMD)与物理介质——典型:400GBASE-SR16

124. Physical Medium Dependent (PMD) sublayer and medium, type 400GBASE-DR4

第一百二十四章:物理介质相关子层(PMD)与物理介质——典型:400GBASE-DR4

125. Introduction to 2.5 Gb/s and 5 Gb/s networks

第一百二十五章:2.5 Gb/s、5 Gb/s网络介绍

126. Physical Coding Sublayer (PCS), Physical Medium Attachment (PMA) sublayer, and baseband medium, type 2.5GBASE-T and 5GBASE-T

第一百二十六章:物理编码子层(PCS)、物理介质连接子层(PMA)与物理介质——典型:2.5GBASE-T、5GBASE-T

  • 9
    点赞
  • 88
    收藏
    觉得还不错? 一键收藏
  • 6
    评论
### 回答1: IEEE Std 802.3是一份关于以太网局域网技术标准的文档,2018年版本是其最新版本。其中包含了规定了网络通信的物理层和数据链路层协议、寻址格式、帧结构、数据传输速率以及网络管理等各方面的标准化规范,是以太网技术的基石。 IEEE Std 802.3 -2018中文版对先前版本进行了更新和修订,增加了新的性能和安全特征。新标准对于支持高速以太网的数据传输速率、更广泛的网络应用和更具扩展性等方面进行了优化和改进,提高了网络传输的质量和可靠性。 该标准规定了以太网的传输冲突控制算法,保证数据传输过程的正确性和实时性。它还提供了各种物理层的选项,包括传统的千兆以太网和支持更高传输速率的10 Gbps、25 Gbps、40 Gbps、50 Gbps和100 Gbps等。 IEEE Std 802.3 -2018中文版还提供了多种网络管理方式,包括基于互联网的管理协议和各种本地管理协议,确保网络的安全性和灵活性。它还支持以太网的多种应用程序,包括IP电话、数据存储、高清视频流等。 总之,IEEE Std 802.3 -2018中文版规定了以太网局域网技术的最新标准化规范,为实现更高效、更稳定、更安全的网络传输提供了基础和保障。 ### 回答2: IEEE标准802.3-2018以太网技术的最新标准。这个标准覆盖了以太网的所有方面,包括电气、光学和物理层,以及链路层和网络层的协议。 802.3标准规定了以太网的帧结构、帧格式和物理媒介。它定义了一些标准化的速率,包括10Mbps、100Mbps、1Gbps、10Gbps、25Gbps、40Gbps、50Gbps和100Gbps。不同速率的以太网使用不同的物理介质,包括双绞线、光纤和同轴电缆。 802.3标准还定义了以太网交换机如何工作,以及如何实现数据的转发和过滤。它还规定了对数据接口的标准化,以确保不同厂商的设备能够互操作。 在2018年的更新中,该标准增加了支持更高速率的设备和更高效的数据传输。这包括增加了100Gbps和400Gbps的速率选项,并增加了一些高级功能,如前向纠错和灵活的时隙分配,以提高网络性能和可靠性。 总的来说,IEEE标准802.3-2018以太网的发展奠定了坚实的基础,使它成为当今网络技术的核心。随着科技的不断发展,这个标准也将不断更新和发展,以满足不同应用的需求。 ### 回答3: IEEE Std 802.3-2018中文版是IEEE(国际电气和电子工程师协会)制定的以太网标准,是目前全球最为常用的局域网标准之一。 该标准规定了以太网的基本结构、协议和通信机制,其中包括MAC(介质访问控制)子层和物理层。MAC子层管理网络接口卡上的数据传输,物理层则负责传输介质上的数据信号。 IEEE Std 802.3-2018中文版还规定了以太网的帧格式、速率和尺寸等方面的内容,例如10 Mb/s、100 Mb/s、1 Gb/s、10 Gb/s和100 Gb/s等速率的以太网。此外,该标准还定义了一些特定的以太网类型,如令牌环以太网、100VG-AnyLAN以太网、以及千兆以太网(Gigabit Ethernet)等。 同时,IEEE Std 802.3-2018中文版对以太网的安全性、可靠性和互操作性等方面做出了规定,确保以太网的正常运行和传输数据的安全性。 总的来说,IEEE Std 802.3-2018中文版是一份全面规范了以太网结构和协议的标准,它的存在保障了以太网的正常运行,并带动了以太网技术的不断进步和发展,成为现代互联网的核心基础设施之一。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 6
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值