在ubutn 12.04下编译FFMPEG

Get the Dependencies

Copy and paste the whole code box for each step.

sudo apt-get update
sudo apt-get -y install autoconf automake build-essential git libass-dev libgpac-dev \
  libsdl1.2-dev libtheora-dev libtool libva-dev libvdpau-dev libvorbis-dev libx11-dev \
  libxext-dev libxfixes-dev pkg-config texi2html zlib1g-dev
mkdir ~/ffmpeg_sources

• Server users can omit the ffplay and x11 dependencies: libsdl1.2-dev libva-dev libvdpau-dev libx11-dev libxext-dev libxfixes-dev.
• Ubuntu 10.04 Lucid users will need to install the git-core package instead of the git package. Lucid lacks the package libva-dev. This can be ignored.

---

Compilation & Installation

One advantage to compiling is that you can build ffmpeg to your liking. If you do not require certain encoders you may skip the relevant section and then remove the appropriate ./configure option in FFmpeg. For example, if libopus is not needed, then skip that section and then remove --enable-libopus from the Install FFmpeg section.

Yasm

Yasm is an assembler used by x264 and FFmpeg.

Ubuntu 13.04 and Mint 15 users can alternatively install the yasm package from the repository instead of compiling.

cd ~/ffmpeg_sources
wget http://www.tortall.net/projects/yasm/releases/yasm-1.2.0.tar.gz
tar xzvf yasm-1.2.0.tar.gz
cd yasm-1.2.0
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin"
make
make install
make distclean
. ~/.profile

x264

H.264 video encoder. See the x264 Encoding Guide for more information and examples.

cd ~/ffmpeg_sources
git clone --depth 1 git://git.videolan.org/x264.git
cd x264
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static
make
make install
make distclean

Note: You can download the nightly  x264 source snapshot as an alternative to using git.

fdk-aac

AAC audio encoder. See the AAC Encoding Guide for more information and examples.

cd ~/ffmpeg_sources
git clone --depth 1 git://github.com/mstorsjo/fdk-aac.git
cd fdk-aac
autoreconf -fiv
./configure --prefix="$HOME/ffmpeg_build" --disable-shared
make
make install
make distclean

Note: You can download a  fdk-aac source snapshot as an alternative to using git.

libmp3lame

MP3 audio encoder.

Most users can install the repository package:

sudo apt-get install libmp3lame-dev

Ubuntu 10.04 and Debian Squeeze users must compile:

sudo apt-get install nasm
cd ~/ffmpeg_sources
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar xzvf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure --prefix="$HOME/ffmpeg_build" --enable-nasm --disable-shared
make
make install
make distclean

libopus

Opus audio decoder and encoder.

Ubuntu 13.04 and Mint 15 users can alternatively install the libopus-dev package from the repository instead of compiling.

cd ~/ffmpeg_sources
wget http://downloads.xiph.org/releases/opus/opus-1.0.3.tar.gz
tar xzvf opus-1.0.3.tar.gz
cd opus-1.0.3
./configure --prefix="$HOME/ffmpeg_build" --disable-shared
make
make install
make distclean

libvpx

VP8/VP9 video encoder and decoder. See the vpx (WebM) Encoding Guide for more information and examples.

Ubuntu 13.04 and Mint 15 users can alternatively install the libvpx-dev package from the repository instead of compiling.

cd ~/ffmpeg_sources
git clone --depth 1 http://git.chromium.org/webm/libvpx.git
cd libvpx
./configure --prefix="$HOME/ffmpeg_build" --disable-examples
make
make install
make clean

Note: You can download a  libvpx source snapshot as an alternative to using git.

ffmpeg

Note: Server users should remove --enable-x11grab from the following command:

cd ~/ffmpeg_sources
git clone --depth 1 git://source.ffmpeg.org/ffmpeg
cd ffmpeg
PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig"
export PKG_CONFIG_PATH
./configure --prefix="$HOME/ffmpeg_build" \
  --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
  --bindir="$HOME/bin" --extra-libs="-ldl" --enable-gpl --enable-libass --enable-libfdk-aac \
  --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx \
  --enable-libx264 --enable-nonfree --enable-x11grab
make
make install
make distclean
hash -r

Note: You can download the nightly FFmpeg source snapshot as an alternative to using git.

---

Finish

Installation is now complete and ffmpeg is now ready for use. Check to see if you're using your new ffmpeg:

$ ffmpeg 2>&1 | head -n1
ffmpeg version git-2013-05-18-5918b7a Copyright (c) 2000-2013 the FFmpeg developers

If you do not see FFmpeg developers in your output then something went wrong and you're probably using the  fake "ffmpeg" from the repository.

You can keep the ffmpeg_sources directory if you plan on updating later. See Updating FFmpeg below for more details followed by instructions for reverting all changes made by this guide.

---

Updating FFmpeg

Development of FFmpeg is active and an occasional update can give you new features and bug fixes. First, remove (or move) the old files and then update the dependencies:

rm -rf ~/ffmpeg_build ~/bin/{ffmpeg,ffprobe,ffserver,vsyasm,x264,yasm,ytasm}
sudo apt-get update
sudo apt-get -y install autoconf automake build-essential git libass-dev libgpac-dev \
  libsdl1.2-dev libtheora-dev libtool libva-dev libvdpau-dev libvorbis-dev libx11-dev \
  libxext-dev libxfixes-dev pkg-config texi2html zlib1g-dev

Server users can omit: libsdl1.2-dev libva-dev libvdpau-dev libx11-dev libxext-dev libxfixes-dev.

x264

cd ~/ffmpeg_sources/x264
make distclean
git pull

Now run ./configure, make, and make install as shown in the Install x264 section.

fdk-aac

cd ~/ffmpeg_sources/fdk-aac
make distclean
git pull

Now run ./configure, make, and make install as shown in the Install fdk-aac section.

libvpx

cd ~/ffmpeg_sources/libvpx
make clean
git pull

Now run ./configure, make, and make install as shown in the Install libvpx section.

ffmpeg

cd ~/ffmpeg_sources/ffmpeg
make distclean
git pull

Now run ./configure, make, and make install as shown in the Install FFmpeg section.

---

Reverting Changes Made by This Guide

To remove ffmpeg, x264, and dependencies installed for this guide:

rm -rf ~/ffmpeg_build ~/ffmpeg_sources ~/bin/{ffmpeg,ffprobe,ffserver,vsyasm,x264,yasm,ytasm}
sudo apt-get autoremove autoconf automake build-essential git libass-dev libgpac-dev \
  libmp3lame-dev libopus-dev libsdl1.2-dev libtheora-dev libtool libva-dev libvdpau-dev \
  libvorbis-dev libvpx-dev libx11-dev libxext-dev libxfixes-dev texi2html zlib1g-dev
hash -r

---

If You Need Help

Feel free to ask questions at the #ffmpeg IRC channel or the ffmpeg-user mailing list.

---

• 以上的 官方的在ubutn下编译FFmpeg的步骤 
• 1 先更新 相关的依赖 

• sudo apt-get update
  sudo apt-get -y install autoconf automake build-essential git libass-dev libgpac-dev \
    libsdl1.2-dev libtheora-dev libtool libva-dev libvdpau-dev libvorbis-dev libx11-dev \
    libxext-dev libxfixes-dev pkg-config texi2html zlib1g-dev
  mkdir ~/ffmpeg_sources

  ffmpeg_sources

  根据文档 安装依赖包   安装完后  建立一个ffmpeg_sources 用来存放 FFMpeg和一些要编译的 文件的 文件
• 2 安装相关的 包 根据文档提示有 x264 ,fdk-acc 。。。等包 我在安装的时候 找不到

  libmp3lame 这个包 那么我就去lame 的官方下载一个 然后放到sources目录 即可

  3.开始编译我们的ffmpeg 

  cd ~/ffmpeg_sources
  git clone --depth 1 git://source.ffmpeg.org/ffmpeg
  cd ffmpeg
  PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig"
  export PKG_CONFIG_PATH
  ./configure --prefix="$HOME/ffmpeg_build" \
    --extra-cflags="-I$HOME/ffmpeg_build/include" --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
    --bindir="$HOME/bin" --extra-libs="-ldl" --enable-gpl --enable-libass --enable-libfdk-aac \
    --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx \
    --enable-libx264 --enable-nonfree --enable-x11grab
  make
  make install
  make distclean
  hash -r

   OK 编译完成 
  
  
  在终端 输入 ffmeg -version 就可以查看的编译的版本  通过 man ffmpeg 查看相关的 命令 和参数 好了 教程没什么技术含量 就是给大家做个演示  我希望大家 不管做什么 先去百度 看看别人的方式 ，真正下手去做的时候 ，应该去官方网站 去看看 一手 和最新的资源 百度的东西大多是是cpy 真的感觉 你实验了么 就转载 好了大家开始编译把  对了 源代码 可以同过上面给出的命令 下载 具体的全在上面 本文
  
  
  环境 ubutn 12.04 64bit
  参考：ffmpeg的官方编译步骤 
   测试时间 2013 年 8月23日