1。连好线路
2 .配置基础Ip以R4为例
3。配置缺省路由
[R1]ip route-static 0.0.0.0 0 14.1.1.2
[R2]ip route-static 0.0.0.0 0 24.1.1.2
[R3]ip route-static 0.0.0.0 0 34.1.1.2
[R5]ip route-static 0.0.0.0 0 45.1.1.2
[R6]ip route-static 0.0.0.0 0 46.1.1.2
4.nat
5。mgre
[R1]int t0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 14.1.1.1
[R1-Tunnel0/0/0]nhrp network-id 100
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R2]int t0/0/0
[R2-Tunnel0/0/0]ip add 10.1.1.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source g0/0/1
[R2-Tunnel0/0/0]nhrp entry 10.1.1.1 14.1.1.1 register
[R2-Tunnel0/0/0]nhrp network-id 100
[R3]int t0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source g0/0/1
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 14.1.1.1 register
[R3-Tunnel0/0/0]nhrp network-id 100
6全连网状mgre
[R1-Tunnel0/0/1]ip add 10.2.1.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre p2mp
[R1-Tunnel0/0/1]source 41.1.1.1
[R1-Tunnel0/0/1]nhrp entry 10.2.1.2 46.1.1.1 register
[R1-Tunnel0/0/1]nhrp network-id 200
[R5-Tunnel0/0/1]ip add 10.2.1.2 24
[R5-Tunnel0/0/1]tunnel-protocol gre p2mp
[R5-Tunnel0/0/1]source 45.1.1.1
[R5-Tunnel0/0/1]nhrp entry 10.2.1.1 14.1.1.1 register
[R5-Tunnel0/0/1]nhrp network-id 200
[R6-Tunnel0/0/1]ip add 10.2.1.3 24
[R6-Tunnel0/0/1]tunnel-protocol gre p2mp
[R6-Tunnel0/0/1]source 46.1.1.1
[R6-Tunnel0/0/1]nhrp entry 10.2.1.1 41.1.1.1 register
[R6-Tunnel0/0/1]nhrp entry 10.2.1.2 45.1.1.1 register
[R6-Tunnel0/0/1]nhrp network-id 200
7启动ospf以R1为例
[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 10.2.1.0 0.0.0.255
8.测试