Microeconmics FinalPython

Java Python Microeconmics Final

1) Billy likes candy and popcorn. Candy sells for $0.50 a bag and popcorn sells for $1 per bag. Currently he is in consumer equilibrium. Then the price of candy rises to $1 a bag. Which statement is true in the new consumer equilibrium?

A) The marginal utility from popcorn will increase.

B) Marginal utility per dollar on candy will be equal to 2.

C) Total utility will increase.

D) The marginal utility from candy will decrease.

E) The marginal utility from candy will be equal to the marginal utility from popcorn.

2) Beverly is currently in consumer equilibrium. An increase in her income

A) increases her total utility.

B) decreases her total utility.

C) increases her marginal utility from all goods.

D) decreases her marginal utility from all goods.

E) increases her consumption of all goods.

3) With respect to water and diamonds, water

A) has a higher marginal utility.

B) has a lower marginal utility.

C) has a lower total utility.

D) is cheaper than diamonds because it has a lower total utility.

E) has zero marginal utility.

4) Neuroeconomics studies all of the following concepts except

A) the prefrontal cortex.

B) the hippocampus.

C) the production possibilities frontier.

D) dopamine.

E) anxiety and fear.

5) Suppose all prices double and income also doubles. Which statement is true?

A) The budget line does not change.

B) The slope of the budget line increases.

C) The slope of the budget line decreases.

D) The budget line shifts rightward.

E) The budget line shifts leftward.

6) Bill consumes apples and bananas. Apples are measured on the vertical axis and bananas are measured on the horizontal axis. Bill's income doubles, the price of apples doubles, and  the price of bananas triples. Bill's budget line

A) remains unchanged.

B) shifts rightward and the slope does not change.

C) shifts rightward and becomes steeper.

D) shifts rightward and becomes flatter.

E) becomes steeper.

7) Goods that can be bought in any quantity desired are called   

A) divisible goods.

B) invisible goods.

C) inferior goods.

D) services.

E) normal goods.

8) A firm's goal is to

A) maximize revenue.

B) maximize cost while minimizing revenue.

C) maximize profit.

D) minimize costs.

E) minimize risk.

9) Which one of the following statements about the implicit rental rate of capital is true?

A) It is the market value of capital.

B) It is the opportunity cost to a firm of using its own capital.

C) It includes normal profit.

D) It is the amount paid for the use of land or buildings.

E) It is the depreciated value of capital.

10) Flora's Flowers bought a new van last year for $10,000. It can now sell the van for $8,500. To buy this year's model of the same van it would have to pay $11,000. What is the one-year amount of economic depreciation?

A) $2,500

B) $1,500

C) $1,000

D) $10,000

E) $3,500

11) Economic profit equals total revenue minus

A) the cost of resources bought in the market.

B) the implicit rental rate.

C) the opportunity cost of production.

D) the cost of resources supplied by the owner.

E) the cost of resources owned by the firm.

12) To produce a unit of output, Alphaworks uses 10 hours of labour and 5 kilograms of material. Betaworks uses 5 hours of labour and 10 kilograms of material, and Gammaworks uses 10 hours of labour and 10 kilograms of material. If labour costs $10 per hour and material costs $5 per kilogram, which firm is economically efficient?

A) Alphaworks only

B) Betaworks only

C) Gammaworks only

D) Alphaworks and Betaworks

E) Alphaworks and Gammaworks

13) Which one of the following statements is true?

A) All technologically efficient methods are also economically efficient.

B) All economically efficient methods are also technologically efficient.

C) Technological efficiency changes with changes in relative input prices.

D) Technologically efficient firms will be more likely to survive than economically efficient firms.

E) Technological efficiency is more important than economical efficiency.

14) Some firms use large amounts of capital and small amounts of labour, while others use small amounts of capital and large amounts of labour to

A) use surpluses of labour and capital and eliminate unemployment of these resources.

B) use the best available technology.

C) use the resources that are most readily available.

D) maximize profit.

E) maximize production.

15) A firm with a single owner who has unlimited liability is

A) a corporation.

B) a sole proprietorship.

C) a limited partnership.

D) an unlimited partnership.

E) a cooperative.

16) The short run is a time frame in which

A) the firm is not able to hire more workers.

B) the amount of output produced is fixed.

C) there is a shortage of most factors of production.

D) at least one factor of production is fixed.

E) there is not enough time to make all of the decisions necessary to maximize profit.

17) Plant refers to those factors of production

A) that are too expensive for the firm to purchase.

B) that must be held in storage for at least one year.

C) that are fixed in the short run.

D) that have a decreasing marginal product as more of the factor is used.

E) which can be purchased only in fixed quantity lots.

18) The long run refers to a time period

A) of one year or less.

B) in which all factors of production are variable.

C) in which labour is variable, but plant is fixed.

D) when there is at least one variable factor of production.

E) of at least 5 years.

19) After constructing a new factory, the cost of building the factor is a

A) past cost.

B) variable cost.

C) significant cost.

D) taxable cost.

E) sunk cost.

20) Which of the following factors are fixed in the long run?

A) labour

B) capital

C) land

D) entrepreneurship

E) No factors of production are fixed in the long run.

21) Marginal product of labour is the increase in total product that results from a

A) one-unit increase in the quantity of labour employed, other inputs remaining the same.

B) one-unit increase in the quantity of fixed inputs employed, holding the quantity of labour constant.

C) one-unit increase in both the quantity of variable and fixed inputs.

D) change in the cost of labour.

E) 1 percent change in the quantity of labour and the quantity of capital employed.

Refer to the table below to answer the following questions.

Table 1

Microeconmics FinalPython

Labour

(workers per day)

Output

(teapots per day)

0

0

1

3

2

12

3

19

4

23

5

25

22) Refer to Table 1which gives Tania's total product schedule. The marginal product when the firm increases the number of workers from 3 to 4 per day is

A) 6 teapots.

B) 2 teapots.

C) 9 teapots.

D) 7 teapots.

E) 4 teapots.

23) Refer to Table 1 which gives Tania's total product schedule. The marginal product when the number of workers increases from 1 to 2 is

A) 3 teapots.

B) 12 teapots.

C) 7 teapots.

D) 9 teapots.

E) 6 teapots.

24) Refer to Table 1 which gives Tania's total product schedule. The average product when the firm hires two workers is

A) 3 teapots per worker.

B) 6 teapots per worker.

C) 7 teapots per worker.

D) 9 teapots per worker.

E) 12 teapots per worker.

25) A firm's total fixed cost is $100. If total cost is $200 for one unit of output and $310 for two units, what is the marginal cost of the second unit?

A) $100

B) $110

C) $200

D) $210

E) $310

26) Consider a graph that shows the total cost curve and the total variable cost curve. As output increases, the vertical distance between these two curves

A) increases.

B) decreases.

C) becomes smaller and then larger.

D) becomes larger and then smaller.

E) is constant.

27) A production function is the relationship between the maximum output attainable and the

A) price of output.

B) change in technology.

C) demand for output.

D) quantities of inputs used.

E) amount of labour used.

28) Suppose a candy manufacturer can triple its production of fudge by doubling its production facility for making fudge. This indicates the presence of

A) constant returns to scale.

B) economies of scale.

C) diseconomies of scale.

D) market constraints.

E) the law of diminishing returns.

29) Perfect competition occurs in a market where there are many firms, each selling

A) an identical product.

B) a similar product.

C) a unique product.

D) a capital-intensive product.

E) a competitive product.

30) Which one of the following does not occur in perfect competition?

A) No single firm can exert a significant influence on the market price of the good.

B) There are many buyers.

C) There are significant restrictions on entry into the market.

D) Sellers and buyers are well informed about prices.

E) Established firms have no advantage over new ones.

31) An example of a perfectly competitive industry is the

A) airline industry.

B) beer industry.

C) running shoe industry.

D) fast food industry.

E) wheat industry.

32) Economic profit equals

A) total fixed cost plus total variable cost.

B) total revenue minus marginal cost.

C) marginal revenue minus marginal cost.

D) total revenue minus total cost.

E) total revenue minus total variable cost.

33) A firm shuts down if price is

A) above minimum average variable cost.

B) below minimum average variable cost.

C) above minimum average fixed cost.

D) less than marginal cost.

E) below average total cost.

34) If a perfectly competitive firm's marginal revenue is less than its marginal cost, the firm

A) cannot increase its economic profit.

B) must be making an economic profit.

C) will decrease its output to increase economic profit.

D) will increase its output to increase economic profit.

E) must raise the price.

35) If firms exit an market, the

A) market supply curve shifts leftward.

B) price of the good falls.

C) economic profit of the remaining firms decrease.

D) total market output increases.

E) economic profit of the remaining firms stay the same.

36) Technological change

A) brings only temporary gains to producers.

B) brings only temporary gains to consumers.

C) brings permanent gains to producers.

D) decreases the number of firms in an industry.

E) decreases the number of consumers in a market.

37) An exclusive right granted to a firm to supply a good or service is

A) a licence.

B) a patent.

C) a public franchise.

D) the essential characteristic of natural monopoly.

E) an economy of scale.

38) A natural monopoly exists when

A) the government protects the firm by granting an exclusive franchise.

B) production can take place with constant returns to scale.

C) there are no rivals in the market.

D) one firm can supply the entire market at a lower cost than two or more firms.

E) the average total cost curve is upward sloping.

39) A single-price monopoly is a firm that                   each unit of its output                   . A

 monopoly sells different units of a good or service for different prices.

A) produces; at a constant cost; discriminatory

B) must sell; for the same price to all its customers; price-discriminating

C) produces; at a constant cost; price-discriminating

D) must sell; for the same price to all its customers; discriminatory

E) must sell; at the same price as a perfectly competitive firm; price-discriminating

40) In monopolistic competition

A) firms practice product differentiation.

B) the goods produced by each firm are identical.

C) firms do not have any control over the price of their products.

D) there are barriers to entry.

E) a small number of firms compete         

  • 4
    点赞
  • 3
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
1 目标检测的定义 目标检测(Object Detection)的任务是找出图像中所有感兴趣的目标(物体),确定它们的类别和位置,是计算机视觉领域的核心问题之一。由于各类物体有不同的外观、形状和姿态,加上成像时光照、遮挡等因素的干扰,目标检测一直是计算机视觉领域最具有挑战性的问题。 目标检测任务可分为两个关键的子任务,目标定位和目标分类。首先检测图像中目标的位置(目标定位),然后给出每个目标的具体类别(目标分类)。输出结果是一个边界框(称为Bounding-box,一般形式为(x1,y1,x2,y2),表示框的左上角坐标和右下角坐标),一个置信度分数(Confidence Score),表示边界框中是否包含检测对象的概率和各个类别的概率(首先得到类别概率,经过Softmax可得到类别标签)。 1.1 Two stage方法 目前主流的基于深度学习的目标检测算法主要分为两类:Two stage和One stage。Two stage方法将目标检测过程分为两个阶段。第一个阶段是 Region Proposal 生成阶段,主要用于生成潜在的目标候选框(Bounding-box proposals)。这个阶段通常使用卷积神经网络(CNN)从输入图像中提取特征,然后通过一些技巧(如选择性搜索)来生成候选框。第二个阶段是分类和位置精修阶段,将第一个阶段生成的候选框输入到另一个 CNN 中进行分类,并根据分类结果对候选框的位置进行微调。Two stage 方法的优点是准确度较高,缺点是速度相对较慢。 常见Tow stage目标检测算法有:R-CNN系列、SPPNet等。 1.2 One stage方法 One stage方法直接利用模型提取特征值,并利用这些特征值进行目标的分类和定位,不需要生成Region Proposal。这种方法的优点是速度快,因为省略了Region Proposal生成的过程。One stage方法的缺点是准确度相对较低,因为它没有对潜在的目标进行预先筛选。 常见的One stage目标检测算法有:YOLO系列、SSD系列和RetinaNet等。 2 常见名词解释 2.1 NMS(Non-Maximum Suppression) 目标检测模型一般会给出目标的多个预测边界框,对成百上千的预测边界框都进行调整肯定是不可行的,需要对这些结果先进行一个大体的挑选。NMS称为非极大值抑制,作用是从众多预测边界框中挑选出最具代表性的结果,这样可以加快算法效率,其主要流程如下: 设定一个置信度分数阈值,将置信度分数小于阈值的直接过滤掉 将剩下框的置信度分数从大到小排序,选中值最大的框 遍历其余的框,如果和当前框的重叠面积(IOU)大于设定的阈值(一般为0.7),就将框删除(超过设定阈值,认为两个框的里面的物体属于同一个类别) 从未处理的框中继续选一个置信度分数最大的,重复上述过程,直至所有框处理完毕 2.2 IoU(Intersection over Union) 定义了两个边界框的重叠度,当预测边界框和真实边界框差异很小时,或重叠度很大时,表示模型产生的预测边界框很准确。边界框A、B的IOU计算公式为: 2.3 mAP(mean Average Precision) mAP即均值平均精度,是评估目标检测模型效果的最重要指标,这个值介于0到1之间,且越大越好。mAP是AP(Average Precision)的平均值,那么首先需要了解AP的概念。想要了解AP的概念,还要首先了解目标检测中Precision和Recall的概念。 首先我们设置置信度阈值(Confidence Threshold)和IoU阈值(一般设置为0.5,也会衡量0.75以及0.9的mAP值): 当一个预测边界框被认为是True Positive(TP)时,需要同时满足下面三个条件: Confidence Score > Confidence Threshold 预测类别匹配真实值(Ground truth)的类别 预测边界框的IoU大于设定的IoU阈值 不满足条件2或条件3,则认为是False Positive(FP)。当对应同一个真值有多个预测结果时,只有最高置信度分数的预测结果被认为是True Positive,其余被认为是False Positive。 Precision和Recall的概念如下图所示: Precision表示TP与预测边界框数量的比值 Recall表示TP与真实边界框数量的比值 改变不同的置信度阈值,可以获得多组Precision和Recall,Recall放X轴,Precision放Y轴,可以画出一个Precision-Recall曲线,简称P-R
图像识别技术在病虫害检测中的应用是一个快速发展的领域,它结合了计算机视觉和机器学习算法来自动识别和分类植物上的病虫害。以下是这一技术的一些关键步骤和组成部分: 1. **数据收集**:首先需要收集大量的植物图像数据,这些数据包括健康植物的图像以及受不同病虫害影响的植物图像。 2. **图像预处理**:对收集到的图像进行处理,以提高后续分析的准确性。这可能包括调整亮度、对比度、去噪、裁剪、缩放等。 3. **特征提取**:从图像中提取有助于识别病虫害的特征。这些特征可能包括颜色、纹理、形状、边缘等。 4. **模型训练**:使用机器学习算法(如支持向量机、随机森林、卷积神经网络等)来训练模型。训练过程中,算法会学习如何根据提取的特征来识别不同的病虫害。 5. **模型验证和测试**:在独立的测试集上验证模型的性能,以确保其准确性和泛化能力。 6. **部署和应用**:将训练好的模型部署到实际的病虫害检测系统中,可以是移动应用、网页服务或集成到智能农业设备中。 7. **实时监测**:在实际应用中,系统可以实时接收植物图像,并快速给出病虫害的检测结果。 8. **持续学习**:随着时间的推移,系统可以不断学习新的病虫害样本,以提高其识别能力。 9. **用户界面**:为了方便用户使用,通常会有一个用户友好的界面,显示检测结果,并提供进一步的指导或建议。 这项技术的优势在于它可以快速、准确地识别出病虫害,甚至在早期阶段就能发现问题,从而及时采取措施。此外,它还可以减少对化学农药的依赖,支持可持续农业发展。随着技术的不断进步,图像识别在病虫害检测中的应用将越来越广泛。
1 目标检测的定义 目标检测(Object Detection)的任务是找出图像中所有感兴趣的目标(物体),确定它们的类别和位置,是计算机视觉领域的核心问题之一。由于各类物体有不同的外观、形状和姿态,加上成像时光照、遮挡等因素的干扰,目标检测一直是计算机视觉领域最具有挑战性的问题。 目标检测任务可分为两个关键的子任务,目标定位和目标分类。首先检测图像中目标的位置(目标定位),然后给出每个目标的具体类别(目标分类)。输出结果是一个边界框(称为Bounding-box,一般形式为(x1,y1,x2,y2),表示框的左上角坐标和右下角坐标),一个置信度分数(Confidence Score),表示边界框中是否包含检测对象的概率和各个类别的概率(首先得到类别概率,经过Softmax可得到类别标签)。 1.1 Two stage方法 目前主流的基于深度学习的目标检测算法主要分为两类:Two stage和One stage。Two stage方法将目标检测过程分为两个阶段。第一个阶段是 Region Proposal 生成阶段,主要用于生成潜在的目标候选框(Bounding-box proposals)。这个阶段通常使用卷积神经网络(CNN)从输入图像中提取特征,然后通过一些技巧(如选择性搜索)来生成候选框。第二个阶段是分类和位置精修阶段,将第一个阶段生成的候选框输入到另一个 CNN 中进行分类,并根据分类结果对候选框的位置进行微调。Two stage 方法的优点是准确度较高,缺点是速度相对较慢。 常见Tow stage目标检测算法有:R-CNN系列、SPPNet等。 1.2 One stage方法 One stage方法直接利用模型提取特征值,并利用这些特征值进行目标的分类和定位,不需要生成Region Proposal。这种方法的优点是速度快,因为省略了Region Proposal生成的过程。One stage方法的缺点是准确度相对较低,因为它没有对潜在的目标进行预先筛选。 常见的One stage目标检测算法有:YOLO系列、SSD系列和RetinaNet等。 2 常见名词解释 2.1 NMS(Non-Maximum Suppression) 目标检测模型一般会给出目标的多个预测边界框,对成百上千的预测边界框都进行调整肯定是不可行的,需要对这些结果先进行一个大体的挑选。NMS称为非极大值抑制,作用是从众多预测边界框中挑选出最具代表性的结果,这样可以加快算法效率,其主要流程如下: 设定一个置信度分数阈值,将置信度分数小于阈值的直接过滤掉 将剩下框的置信度分数从大到小排序,选中值最大的框 遍历其余的框,如果和当前框的重叠面积(IOU)大于设定的阈值(一般为0.7),就将框删除(超过设定阈值,认为两个框的里面的物体属于同一个类别) 从未处理的框中继续选一个置信度分数最大的,重复上述过程,直至所有框处理完毕 2.2 IoU(Intersection over Union) 定义了两个边界框的重叠度,当预测边界框和真实边界框差异很小时,或重叠度很大时,表示模型产生的预测边界框很准确。边界框A、B的IOU计算公式为: 2.3 mAP(mean Average Precision) mAP即均值平均精度,是评估目标检测模型效果的最重要指标,这个值介于0到1之间,且越大越好。mAP是AP(Average Precision)的平均值,那么首先需要了解AP的概念。想要了解AP的概念,还要首先了解目标检测中Precision和Recall的概念。 首先我们设置置信度阈值(Confidence Threshold)和IoU阈值(一般设置为0.5,也会衡量0.75以及0.9的mAP值): 当一个预测边界框被认为是True Positive(TP)时,需要同时满足下面三个条件: Confidence Score > Confidence Threshold 预测类别匹配真实值(Ground truth)的类别 预测边界框的IoU大于设定的IoU阈值 不满足条件2或条件3,则认为是False Positive(FP)。当对应同一个真值有多个预测结果时,只有最高置信度分数的预测结果被认为是True Positive,其余被认为是False Positive。 Precision和Recall的概念如下图所示: Precision表示TP与预测边界框数量的比值 Recall表示TP与真实边界框数量的比值 改变不同的置信度阈值,可以获得多组Precision和Recall,Recall放X轴,Precision放Y轴,可以画出一个Precision-Recall曲线,简称P-R
图像识别技术在病虫害检测中的应用是一个快速发展的领域,它结合了计算机视觉和机器学习算法来自动识别和分类植物上的病虫害。以下是这一技术的一些关键步骤和组成部分: 1. **数据收集**:首先需要收集大量的植物图像数据,这些数据包括健康植物的图像以及受不同病虫害影响的植物图像。 2. **图像预处理**:对收集到的图像进行处理,以提高后续分析的准确性。这可能包括调整亮度、对比度、去噪、裁剪、缩放等。 3. **特征提取**:从图像中提取有助于识别病虫害的特征。这些特征可能包括颜色、纹理、形状、边缘等。 4. **模型训练**:使用机器学习算法(如支持向量机、随机森林、卷积神经网络等)来训练模型。训练过程中,算法会学习如何根据提取的特征来识别不同的病虫害。 5. **模型验证和测试**:在独立的测试集上验证模型的性能,以确保其准确性和泛化能力。 6. **部署和应用**:将训练好的模型部署到实际的病虫害检测系统中,可以是移动应用、网页服务或集成到智能农业设备中。 7. **实时监测**:在实际应用中,系统可以实时接收植物图像,并快速给出病虫害的检测结果。 8. **持续学习**:随着时间的推移,系统可以不断学习新的病虫害样本,以提高其识别能力。 9. **用户界面**:为了方便用户使用,通常会有一个用户友好的界面,显示检测结果,并提供进一步的指导或建议。 这项技术的优势在于它可以快速、准确地识别出病虫害,甚至在早期阶段就能发现问题,从而及时采取措施。此外,它还可以减少对化学农药的依赖,支持可持续农业发展。随着技术的不断进步,图像识别在病虫害检测中的应用将越来越广泛。
图像识别技术在病虫害检测中的应用是一个快速发展的领域,它结合了计算机视觉和机器学习算法来自动识别和分类植物上的病虫害。以下是这一技术的一些关键步骤和组成部分: 1. **数据收集**:首先需要收集大量的植物图像数据,这些数据包括健康植物的图像以及受不同病虫害影响的植物图像。 2. **图像预处理**:对收集到的图像进行处理,以提高后续分析的准确性。这可能包括调整亮度、对比度、去噪、裁剪、缩放等。 3. **特征提取**:从图像中提取有助于识别病虫害的特征。这些特征可能包括颜色、纹理、形状、边缘等。 4. **模型训练**:使用机器学习算法(如支持向量机、随机森林、卷积神经网络等)来训练模型。训练过程中,算法会学习如何根据提取的特征来识别不同的病虫害。 5. **模型验证和测试**:在独立的测试集上验证模型的性能,以确保其准确性和泛化能力。 6. **部署和应用**:将训练好的模型部署到实际的病虫害检测系统中,可以是移动应用、网页服务或集成到智能农业设备中。 7. **实时监测**:在实际应用中,系统可以实时接收植物图像,并快速给出病虫害的检测结果。 8. **持续学习**:随着时间的推移,系统可以不断学习新的病虫害样本,以提高其识别能力。 9. **用户界面**:为了方便用户使用,通常会有一个用户友好的界面,显示检测结果,并提供进一步的指导或建议。 这项技术的优势在于它可以快速、准确地识别出病虫害,甚至在早期阶段就能发现问题,从而及时采取措施。此外,它还可以减少对化学农药的依赖,支持可持续农业发展。随着技术的不断进步,图像识别在病虫害检测中的应用将越来越广泛。
1 目标检测的定义 目标检测(Object Detection)的任务是找出图像中所有感兴趣的目标(物体),确定它们的类别和位置,是计算机视觉领域的核心问题之一。由于各类物体有不同的外观、形状和姿态,加上成像时光照、遮挡等因素的干扰,目标检测一直是计算机视觉领域最具有挑战性的问题。 目标检测任务可分为两个关键的子任务,目标定位和目标分类。首先检测图像中目标的位置(目标定位),然后给出每个目标的具体类别(目标分类)。输出结果是一个边界框(称为Bounding-box,一般形式为(x1,y1,x2,y2),表示框的左上角坐标和右下角坐标),一个置信度分数(Confidence Score),表示边界框中是否包含检测对象的概率和各个类别的概率(首先得到类别概率,经过Softmax可得到类别标签)。 1.1 Two stage方法 目前主流的基于深度学习的目标检测算法主要分为两类:Two stage和One stage。Two stage方法将目标检测过程分为两个阶段。第一个阶段是 Region Proposal 生成阶段,主要用于生成潜在的目标候选框(Bounding-box proposals)。这个阶段通常使用卷积神经网络(CNN)从输入图像中提取特征,然后通过一些技巧(如选择性搜索)来生成候选框。第二个阶段是分类和位置精修阶段,将第一个阶段生成的候选框输入到另一个 CNN 中进行分类,并根据分类结果对候选框的位置进行微调。Two stage 方法的优点是准确度较高,缺点是速度相对较慢。 常见Tow stage目标检测算法有:R-CNN系列、SPPNet等。 1.2 One stage方法 One stage方法直接利用模型提取特征值,并利用这些特征值进行目标的分类和定位,不需要生成Region Proposal。这种方法的优点是速度快,因为省略了Region Proposal生成的过程。One stage方法的缺点是准确度相对较低,因为它没有对潜在的目标进行预先筛选。 常见的One stage目标检测算法有:YOLO系列、SSD系列和RetinaNet等。 2 常见名词解释 2.1 NMS(Non-Maximum Suppression) 目标检测模型一般会给出目标的多个预测边界框,对成百上千的预测边界框都进行调整肯定是不可行的,需要对这些结果先进行一个大体的挑选。NMS称为非极大值抑制,作用是从众多预测边界框中挑选出最具代表性的结果,这样可以加快算法效率,其主要流程如下: 设定一个置信度分数阈值,将置信度分数小于阈值的直接过滤掉 将剩下框的置信度分数从大到小排序,选中值最大的框 遍历其余的框,如果和当前框的重叠面积(IOU)大于设定的阈值(一般为0.7),就将框删除(超过设定阈值,认为两个框的里面的物体属于同一个类别) 从未处理的框中继续选一个置信度分数最大的,重复上述过程,直至所有框处理完毕 2.2 IoU(Intersection over Union) 定义了两个边界框的重叠度,当预测边界框和真实边界框差异很小时,或重叠度很大时,表示模型产生的预测边界框很准确。边界框A、B的IOU计算公式为: 2.3 mAP(mean Average Precision) mAP即均值平均精度,是评估目标检测模型效果的最重要指标,这个值介于0到1之间,且越大越好。mAP是AP(Average Precision)的平均值,那么首先需要了解AP的概念。想要了解AP的概念,还要首先了解目标检测中Precision和Recall的概念。 首先我们设置置信度阈值(Confidence Threshold)和IoU阈值(一般设置为0.5,也会衡量0.75以及0.9的mAP值): 当一个预测边界框被认为是True Positive(TP)时,需要同时满足下面三个条件: Confidence Score > Confidence Threshold 预测类别匹配真实值(Ground truth)的类别 预测边界框的IoU大于设定的IoU阈值 不满足条件2或条件3,则认为是False Positive(FP)。当对应同一个真值有多个预测结果时,只有最高置信度分数的预测结果被认为是True Positive,其余被认为是False Positive。 Precision和Recall的概念如下图所示: Precision表示TP与预测边界框数量的比值 Recall表示TP与真实边界框数量的比值 改变不同的置信度阈值,可以获得多组Precision和Recall,Recall放X轴,Precision放Y轴,可以画出一个Precision-Recall曲线,简称P-R
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值