shell练习之安全脚本

题目：

将密码输入错误超过4次的IP地址通过firewalld防火墙阻止访问

1.初始配置

首先使用systemctl工具启用firewalld服务：

​[root@localhost ~]# systemctl enable firewalld

如果已经启用了，我们现在可以通过执行以下命令启动firewalld：

[root@localhost ~]# systemctl start firewalld

且可以通过运行以下命令验证firewalld的状态并且以下输出确认了firewalld启动了并且在运行：

[root@localhost ~]# systemctl status firewalld

2.分析

1、需要知道ssh远程访问记录在哪个文件中/var/log/secure
2、模拟远程访问输错密码，查看日志文件：

cat /var/log/secure

3、了解firewalld添加富规则的知识：

[root@localhost ~]# firewall-cmd --permanent --add-rich-rule='rule family="ipv4" source address="192.168.210.133/24" service name="ssh" reject'
success
[root@localhost ~]# firewall-cmd --reload
success
[root@localhost ~]# firewall-cmd --list-all
public (active)
  target: default
  icmp-block-inversion: no
  interfaces: ens160
  sources: 
  services: cockpit dhcpv6-client ssh
  ports: 
  protocols: 
  forward: no
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 
	rule family="ipv4" source address="192.168.210.133/24" service name="ssh" reject

4、回到192.168.210.133上进行测试：

[root@localhost ~]# ssh root@192.168.210.128
ssh: connect to host 192.168.210.128 port 22: Connection refused

5、测试后将添加的富规则删除：

[root@localhost ~]# firewall-cmd --permanent --remove-rich-rule='rule family="ipv4" source address="192.168.210.133/24" service name="ssh" reject'
success
[root@localhost ~]# firewall-cmd --reload
success
[root@localhost ~]# firewall-cmd --list-all
public (active)
  target: default
  icmp-block-inversion: no
  interfaces: ens160
  sources: 
  services: cockpit dhcpv6-client ssh
  ports: 
  protocols: 
  forward: no
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules:

3.编写脚本

[root@localhost shell]# vim deny_ip.sh

#!/bin/bash
#*************************************************************
#Author:czc
#Date:  2023-01-09
#FileName: deny_ip.sh
#*************************************************************
serc_log=/avr/log/secure
ip_list=`awk '/Failed password/ {IP[$(NF-3)]++} END{for (k in IP){if (IP[k]>=4) {print k} }}' /var/log/secure`
for ip in `echo $ip_list`
do
        denyed_ip=`firewall-cmd --list-all | awk -F'[= ]' '/rule family/ && $NF="reject" && $(NF-1)~/ssh/ {print $6}' | awk -F'["/]' '{print $2}'`
        echo $denyed_ip | grep -q $ip
        [ $? -ne 0 ] && firewall-cmd --permanent --add-rich-rule="rule family="ipv4" source address="$ip" service name="ssh" reject"
done

firewall-cmd --reload

[root@localhost shell]# chmod a+rx deny_ip.sh

4.测试

由于此时192.168.210.133只输错密码3次，因此执行脚本后，并未添加富规则。


此时再到192.168.210.133上对本机进行访问，累计达到4次错误及以上：[root@localhost ~]# ssh

root@192.168.210.128
root@192.168.210.128's password: 
Permission denied, please try again.
root@192.168.210.128's password: 
Permission denied, please try again.
root@192.168.210.128's password: 

可以看到现在的输入密码错误次数累计达到5次：

#此时在192.168.210.128上执行脚本
[root@localhost shell]# ./deny_ip.sh
success
success
[root@localhost shell]# firewall-cmd --list-all
public (active)
  target: default
  icmp-block-inversion: no
  interfaces: ens160
  sources: 
  services: cockpit dhcpv6-client ssh
  ports: 
  protocols: 
  forward: no
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 
	rule family="ipv4" source address="192.168.210.133" service name="ssh" reject


#再回到192.168.210.133上进行测试

[root@localhost ~]# ssh root@192.168.210.128
ssh: connect to host 192.168.210.128 port 22: Connection refused

至此，脚本的编写和测试就完成了。