全志A133方案CTP新增（GT9XX系列）

i2c触摸屏：

一.此部分为添加kernel驱动宏开关：

1>.longan\kernel\linux-4.9\arch\arm64\configs\sun50iw10p1smp_a133_android_defconfig

CONFIG_INPUT_TOUCHSCREEN=y

+CONFIG_TOUCHSCREEN_GT9XXNEW_TS=y

二.此部分为在设备树中修改所挂的i2c的pin脚：

2>.longan\device\config\chips\a133\configs\c3\board.dts

twi1_pins_a: twi1@0 {

- allwinner,pins = "PE2", "PE3";

+ allwinner,pins = "PB4", "PB5";

allwinner,pname = "twi1_scl", "twi1_sda";

allwinner,function = "twi1";

allwinner,muxsel = ;

allwinner,drive = ;

allwinner,pull = ;

};

twi1_pins_b: twi1@1 {

- allwinner,pins = "PE2", "PE3";

+ allwinner,pins = "PB4", "PB5";

allwinner,function = "io_disabled";

allwinner,muxsel = ;

allwinner,drive = ;

allwinner,pull = ;

};

twi1: twi@0x05002400{ //TP

clock-frequency = ;

pinctrl-0 = ;

pinctrl-1 = ;

+ status = "okay";

+ ctp {

compatible = "allwinner,goodix";

reg = ;

device_type = "ctp";

status = "okay";

ctp_name = "gt9xxnew_ts";

ctp_twi_id = ;

ctp_twi_addr = ;

ctp_screen_max_x = ;

ctp_screen_max_y = ;

+/- ctp_revert_x_flag = ;

+/- ctp_revert_y_flag = ;

+/- ctp_exchange_x_y_flag = ;

ctp_int_port = ;

ctp_wakeup = ;

ctp-supply = ;

ctp_power_ldo_vol = ;

+ };

};

三.此部分为新增数据点传输：

3>.longan\kernel\linux-4.9\drivers\input\init-input.c //使用的是方法1

方法1:直接使用sdk2.2中的init-input.c_2.2-ok.bak文件；

方法2:使用sdk2.4中的init-input.c文件，更改下面

if (!data->dev) {

pr_err("-----get device_node fail\n");

return -1;

}

pr_err("tang sunxi_ctp_startup----------2\n");

+ np = data->dev->of_node;

ret = of_property_read_u32(np, "ctp_twi_id", &data->twi_id);

if (ret) {

pr_err("get twi_id is fail, %d\n", ret);

goto devicetree_get_item_err;

}