2000/Xp 顯示藍色當機之STOP詳解
Windows 2000/Xp 顯示藍色當機之STOP詳解
1.停止錯誤編號:0x0000000A
說明文字：IRQL-NOT-LESS-OR-EQUAL
通常的原因：驅動程式使用了不正確的記憶體位址.
解決方法：如果無法登陸,則重新啟動電腦.當出現可用的作系統列表時,按F8鍵.在Windows進階選
項表單螢幕上,選項"最後一次正確的配置",然後按Enter鍵鍵.
檢查是否正確安裝了所有的新硬體或軟體.如果這是一次全新安裝,請與硬體或軟體的製造商聯繫,
獲得可能需要的任何Windows更新或驅動程式.
執行由電腦製造商提供的所有的系統診斷軟體,尤其是記憶體檢查.
禁用或卸掉新近安裝的硬體(RAM,橋接器,硬碟,調製解調器等等),驅動程式或軟體.
確保硬體設備驅動程式和系統BIOS都是最新的版本.確保製造商可說明 你是否具有最新版本,也可
說明 你獲得這些軟體.
禁用BIOS記憶體選項,例如cache或shadow.
2.停止錯誤編號：0x0000001E
說明文字：KMODE-EXPTION-NOT-HANDLED
通常的原因：內核模式工作試圖執行一個非法或未知的處理器指令.
解決方法：確保有足夠的空間,尤其是在執行一次新安裝的時候.如果停止錯誤消息指出了某個特定
的驅動程式,那麼禁用他.如果無法啟動電腦.應試著用安全模式啟動,以便刪除或禁用該驅動程式.
如果有非 Microsoft支持的視瀕驅動程式,盡量切換到標準的VGA驅動程式或Windows提供的適當驅
動程式.
禁用所有新近安裝的驅動程式.
確保有最新版本的系統BIOS.硬體製造商可說明 確定你是否具有最新版本,也可以說明 你獲得他.
禁用BIOS記憶體選項,例如cache,shadow.
3.停止錯誤編號：0x00000023或0x00000024
說明文字：FAT-FILE-SYSTEM 或 NTFS-FILE-SYSTEM
通常原因：問題出現在 Ntfs.sys (允許系統讀寫NTFS驅動器的驅動程式文件)內.
解決方法：執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體.
禁用或卸載所有的反病毒軟體,磁碟重組程式或制作備份程序.
通過在命令提示字元下執行Chkdsk /f指令檢查硬碟驅動器是否損壞,然後重新啟動電腦.
4.停止編號：0x0000002E
說明文字：DATA-BUS-ERROR
通常的原因：系統記憶體奇偶校驗出錯,通常由硬體問題導致.
解決方法：卸掉所有新近安裝的硬體(RAM.橋接器.硬碟.調製解調器等等).
執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體.
確保硬體設備驅動程式和系統BIOS都是最新版本.
使用硬體供應商提供的系統診斷,執行記憶體檢查來搜尋故障或不匹配的記憶體.
禁用BIOS記憶體選項,例如cache或shadow.
在啟動後出現可用作系統列表時,按F8.在Windows進階選項表單螢幕上,選項"啟動VGA模式，然後
按Enter鍵鍵.如果這樣做還不能解決問題,可能需要更換不同的視瀕橋接器列表,有關支持的視瀕橋接器
列表,請參閱硬體相容性列表.
5.停止編號：0x0000003F
說明文字：NO-MOR-SYSTEM-PTES
通常的原因：沒有正確清理驅動程式.
解決方法：禁用或卸載所有的反病毒軟體，磁牒碎片處理程序或制作備份程序.
6.停止錯誤編號：0x00000058
說明文字：FTDISK-INTERN-ERROR
通常的原因：容錯集內的某個主驅動器發生故障.
解決方法：使用Windows安裝碟啟動電腦,從鏡象(第2)系統驅動器引導.有關如何編輯Boot.ini文件以
指向鏡象系統驅動器的指導,可在本站的其他文章中尋找。
7.停止錯誤編號：0x0000007B
說明文字：INACCESSI-BLE-BOOT-DEVICE
通常原因：啟始化 I/O 系統(通常是指引導設備或文件系統)失敗.
解決方法：啟始扇區病毒通常會導致這種停止錯誤.是用反病毒軟體的最新版本,檢查電腦上是否有
存在病毒.如果找到病毒,則必須執行必要的不找把他從電腦上清除掉,請參閱反病毒軟體我的文件瞭解
如何執行這些步驟.
卸下所有新近安裝的硬體(RAM,橋接器,調製解調器等等).
核對MIcrosoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.
如果使用的適SCSI橋接器,可以從硬體供應商除獲得最新WINDOWS驅動程式,禁用SCSI設備的同步
協商,檢查該SCSI鏈是否終結,並核對這些設備的SCSIID,如果無法確定如何執行能夠這些步驟,可參考硬
體設備的我的文件.
如果你用的是IDE設備,將板上的IDE連接阜定義為唯一的主連接阜.核對IDE設備的主/從/唯一設置.
卸掉除硬碟之外的所有IDE設備.如果無法驗證如何執行這些不找，可參考硬體我的文件.
如果電腦已使用NTFS文件系統格式化,可重新啟動電腦,然後在該系統分區上執行Chkdsk/f/r指令.如
果由於錯誤而無法啟動系統,那麼使用指令控制台,並執行Chkdsk /r指令.
執行Chkdsk /f指令以確定文件系統是否損壞.如果Windows不能執行Chkdsk指令,將驅動器移動到其
他執行Windows的電腦上,然後從這台電腦上對該驅動器執行Chkdsk指令.
8.停止錯誤編號：0x0000007F
說明文字：UNEXPECTED-KERNEL-MODE-TRAP
通常的原因：通常是由於硬體或軟體問題導致,但一般都由硬體故障引起的.
解決方法：核對Microsoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.如果電
腦主機板不相容就會產生這個問題.
卸掉所由新近安裝的硬體.
執行由電腦製造商提供的所有系統診斷軟體,尤其是記憶體檢查.
禁用BIOS記憶體選項,例如cache或shadow.
9.停止錯誤編號：0x00000050
說明文字：PAGE-FAULT-IN-NONPAGED-AREA
通常的原因：記憶體錯誤(資料不能使用分頁文件交換到磁牒中).
解決方法：卸掉所有的新近安裝的硬體.
執行由電腦製造商提供的所有系統診斷軟體.尤其是記憶體檢查.
檢查是否正確安裝了所有新硬體或軟體,如果這是一次全新安裝,請與硬體或軟體製造商聯繫,獲得
可能需要的任何Windows更新或驅動程式.
禁用或卸載所有的反病毒程序.
禁用BIOS記憶體選項,例如cache或shadow.
10.停止錯誤編號：0x0000077
說明文字：KERNEL-STEL-STACK-INPAGE-ERROR
通常的原因：無法從分頁文件將內核資料所需的頁面讀取到記憶體中。
解決方法：使用反病毒軟體的最新版本，檢查電腦上是否有病毒。如果找到病毒，則執行必要的
步驟把他從電腦上清除掉。請參閱製造商提供的所有系統診斷軟體，尤其是記憶體檢查。
禁用BIOS記憶體選項，例如cache,shadow
11.停止錯誤編號：0x00000079
說明文字：MISMATCHED-HAL
通常的原因：硬體抽像層與內核或機器類型不匹配（通常發生在單處理器和多處理器配置文件混
合在同一系統的情況下）。
解決方法：要解決本錯誤，可使用指令控制台替換電腦上錯誤的系統檔案。
單處理器系統的內核文件是Ntoskml.exe，而多處理器系統的內核文件是Ntkrnlmp.exe，但是，這些文件
要與安裝媒體上的文件相對應；在安裝完Windows2000和，不論使用的是哪個原文件，都會被重命名
為Ntoskrnl.exe文件。HAL文件在安裝之後也使用名稱Hal.dll但是在安裝媒體，但是在安裝媒體上卻有若
干個可能的HAL文件。
12.停止錯誤編號：0x0000007A
說明文字：KERNEL-DATA-INPAGE-ERROR
通常的原因：無法從分頁文件將內核資料所需的頁面讀取到記憶體中。（通常是由於分頁文件上
的故障，病毒，磁牒控制器錯誤或由故障的RAM引起的）。
解決方法：使用反病毒軟體的最新版本，檢查電腦上是否存在病毒。如果找到病毒。則執行必要
的步驟把他從電腦上清除掉，請參閱犯病度軟體我的文件瞭解如何執行這些步驟。
如果電腦已使用NTFS文件系統格式化。可重新啟動電腦，然後在該系統分區上執行Chkdsk/f/r指
令。如果由於錯誤而無法啟動指令，那麼使用指令控制台，並執行Chkdsk /r指令。
執行由電腦製造商提供的所有的系統在很端軟體，尤其是記憶體檢查。
13.停止錯誤編號：0xC000021A
說明文字：STATUS-SYSTEM-PROCESS-TERMINATED
通常的原因：用戶模式子系統，例如Winlogon或客戶伺服器執行時子系統（CSRSS）已被損壞，
所以無法再保證安全性。
解決方法：卸掉所有新近安裝的硬體。
如果無法登陸，則重新啟動電腦。當出現可用的作系統列表時按F8，在Windows2000進階選項表
單螢幕上，選項：「最後一次正確的配置」。然後按Enter鍵。
執行故障恢復台，並允許系統修復任何檢測到的錯誤。
14.停止錯誤編號：0xC0000221
說明文字：STATUS-IMAGE-CHECKISU7M-MISMATCH
通常的原因：驅動程式或系統DLL已經被損壞。
解決方法：執行故障復控台，並且允許系統修復任何檢測到的錯誤。
如果在RAM增加到電腦之後，立即發生錯誤，那麼可能是分頁文件損壞，或者新RAM由故障或不
相容。刪除pagefile.sys並將系統返回到原來的RAM配置。
理解 Windows 2000 中的顯示藍色當機(BSOD)現象
理解 Windows 2000 中的顯示藍色當機(BSOD)現象
Brien M. Posey
翻譯:Batman
Windows 2000 也許可以說得上是一個劃時代的操作系統，但是它仍然不能夠避免顯示藍色當機
（Blue Screen of Death）問題。本文的目的是解刨BSOD問題，同時給出如何處理一般的顯示藍色問題
的解決步驟。
一 簡介
什麼是顯示藍色當機（BSOD）問題？
BSOD就是顯示在藍色螢幕背景下的出錯信息。一般這種出錯信息嚴重到你的整個操作系統當機，
你只有重新冷啟動的選項。
停止消息和硬體消息
Win2000的BSOD和NT4以前的BSOD消息是完全不同的。最大的不同就是NT中的BSOD只包含一個
通用的停止消息類型(就是實際的出錯程式碼), 但是Win2000的BSOD包含有兩種消息類型：停止消息和
硬體消息。
停止消息是指，當win2000的內核發現一個它不能夠恢復的軟體錯誤時候產生的錯誤消息。
硬體消息是指，當Win2000發現一個嚴重的硬體衝突時產生的錯誤消息。
二 刨析BSOD
BSOD可以分成獨立的幾部分，每部分包含有有價值的錯誤處理信息。這幾部分包括：
1.bug檢查部分：這是BSOD中包含實際出錯消息的位置。在這部分中，你應該注意的是出錯程式
碼（就是在單詞「Stop」後面的十六進制數字）和錯誤符號（就是緊跟在出錯程式碼後的單詞）。
2.推薦用戶採取行動部分：這部分經常包含一些一般的指導你如何糾正錯誤的步驟的消息。
3.偵錯連接阜信息部分：這部分包含有你應該如何設置你的內核偵錯器的信息。內核偵錯器是讓
你可以通過手工連線到電腦並對工作進行偵錯的工具。
停止信息的四種類型：
當程序或則驅動程式發生了一個不能夠控制的錯誤消息或則試圖執行一個非法指令時，系統就會
發生停止出錯信息。而這種信息通常由四種類型組成：
1.一般停止消息：在正常的使用win2000時發生的停止消息。
2.安裝停止消息：在安裝win2000程序中的停止消息，通常由你的系統中存在和2000不相容的硬體
設備引起的。
3.可執行程序安裝停止消息：表示發生在2000安裝程序中第4個階段（執行程序部分）的停止消
息。
4.軟體陷阱停止消息：由於軟體中的錯誤陷阱並且當程序試圖執行一個非法指令的時候發生的停
止消息。
不管win2000是否迄今為止最偉大的操作系統與否，它不可能是沒有錯誤的。至少我們知道在2000
中，BSOD還是存在的。下面是一個具體的BSOD例子：
*** Stop: 0x0000001E (0xF24A447A, 0X00000001, 0X0000000)
KMODE_EXCEPTION_NOT_HANDLED
*** Address F24A447A base at f24A0000, DateStamp 35825ef8d - wdmaud.
sys
If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow
these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or
check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or
shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to
select Advanced Startup Options, and then select Safe Mode.
Refer to your Getting Started manual for more information on troubleshooting Stop errors.
Kernel Debugger Using: COM2 (Port 0x2f8, Baud Rate 19200)
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or
technical support group.
根據這個具體的例子，按照上面刨析的BSOD四個部分，下面一一介紹：
bug檢查部分：
這是BSOD中包含實際出錯消息的位置。它看上去就是下面的程式碼：
*** Stop: 0x0000001E (0xF24A447A, 0X00000001, 0X0000000)
KMODE_EXCEPTION_NOT_HANDLED
*** Address F24A447A base at f24A0000, DateStamp 35825ef8d - wdmaud.
sys
其中錯誤程式碼是一個緊跟在Stop後面的十六進制數，在這裡面它由其它四個數字組成。
而錯誤符號是指緊隨其後的KMODE_EXCEPTION_NOT_HANDLED.
在一些BSOD出錯信息中，一個記憶體位置和檔案名出現在錯誤符號的後面。這個信息告訴了當錯
誤發生的時候在記憶體中的位置和哪個文件導致了錯誤的發生。當然你是否能夠看到該信息是由哪種
停止消息類型來決定的。在一些實際運用中，你只能夠看到上面的第一行。而這裡通常是表示由顯示
服務中導致的問題。
推薦用戶採取行動部分：
在上面的例子中推薦用戶採取行動部分如下：
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again,
follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message,
disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with
your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you
need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced
Startup Options, and then select Safe Mode. Refer to your Getting Started manual for more information on
troubleshooting Stop errors.
推薦用戶採取行動部分通常是推薦用戶在遇到了出錯信息後應該採取的解決步驟。在消息中可以
看到，解決一個BSOD也許只要重新啟動或則整理出足夠大的剩餘空間就能夠解決了。儘管這樣的方法
偶爾會起到作用，但是實際上要解決BSOD經常要遠遠複雜得多。
偵錯連接阜信息部分：
這部分包含有你應該如何設置你的內核偵錯器的信息。我會在以後的網站裡面詳細介紹什麼是
2000的內核偵錯器。在上面的例子中，這部分內容是：
Kernel Debugger Using: COM2 (Port 0x2f8, Baud Rate 19200)
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or technical support group.
停止信息的四種類型
一般停止消息：
一般停止消息通常是最難解決的出錯信息，因為有可能有無數的原因能夠導致錯誤的發生。
安裝停止消息：
在安裝win2000程序中的停止消息，通常由你的系統中存在有沒有列在2000硬體相容列表中的設
備。解決辦法是你檢視系統中的硬體設備，找到沒有列出在2000相容列表中的設備。然後和你的硬體
設備廠商聯繫看他們是否能夠給你提供該設備的驅動程式。如果他們不能，那你只好從你的系統中刪
除該設備，並用其它的可以相容的設備替換掉。如果你的所有硬體都是相容的，你也許是存在有兩個
互相衝突的硬體設備。要解決這個問題，先移走任何不是必要的硬體設備，然後重新裝載2000，一旦
2000裝載成功後，把 所有移走的設備全部重新加入到系統中。這樣做，通常能夠解決這個問題，至少
能夠告訴你哪些硬體是有衝突的。
可執行程序安裝停止消息：
安裝2000在可執行程序的安裝程序中有兩個階段。第一個階段是禁止硬體中斷同時裝載一些基本
的組件， 例如硬體提取層。第二個階段是啟始化你系統中所有的硬體。如果你在安裝程序到了這個階
段的時候收到了停止消息錯誤。需要再次執行診斷程序，來判斷你的硬體是否都工作正常。然後重新
安裝2000。如果你仍然遇到這個出錯消息，那麼就需要和微軟技術支持部打交道了。
軟體陷阱停止消息：
由於軟體中的錯誤陷阱並且當程序試圖執行一個非法指令的時候發生的停止消息。例如，程序試
圖向一個本來是儲存數字的變量寫字串串的時候，這個錯誤就有可能發生。如果你遇到了這種類型的
錯誤，需要記下出錯信息，是什麼軟體導致了錯誤，一般這些軟體都有新的版本來糾正這些錯誤的。
三 解決問題的技巧
下面是當你遇到了停止消息時候可能需要的解決步驟：
首先判斷你最近是不是在系統中有任何的變動。如果你有，那麼這些變動經常是問題產生的根
源。試圖刪除或者移走新的硬體或軟體，看是否能夠解決問題。檢查系統中的硬體，最好如果有硬體
檢測程式的話，可以執行該程序進行檢測，同時重新插放你的記憶體卡和擴展卡。如果你的停止信息
是發生在啟動中或剛啟動的程序中，那麼這有可能是你的某個服務或則設備驅動程式中的問題。可以
嘗試將機器啟動到安全模式。如果你的2000系統能夠啟動成功安全模式，那麼表示你的猜測是正確
的。同時要確保你的防病毒程序是設計成和win2000相容的，並且隨時保持更新。如果錯誤仍然發生，
那麼進入你的CMOS設置，禁止掉BIOS中的象緩衝或則shadow之類的選項，然後重新啟動。
Windows 2000 的停止錯誤編號及其解釋
Windows 2000 的停止錯誤編號及其解釋
整理 CptFan
停止錯誤編號： 0x00000001 (parameter, parameter, parameter, parameter) APC_INDEX_MISMATCH
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a mismatch of thread and
asynchronous procedure call (APC) indexes. The most common reason to see this message is if a file system has a
mismatched number of KeEnterCriticalRegion compared to KeLeaveCriticalRegion.
停止錯誤編號： 0x00000002 (parameter, parameter, parameter, parameter) DEVICE_QUEUE_NOT_BUSY
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a device queue was expected to
be busy, but was not.
停止錯誤編號： 0x00000003 (parameter, parameter, parameter, parameter) INVALID_AFFINITY_SET
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a null of nonproper subset affinity.
停止錯誤編號： 0x00000004 (parameter, parameter, parameter, parameter) INVALID_DATA_ACCESS_TRAP
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an invalid data access trap.
停止錯誤編號： 0x00000005 (parameter, parameter, parameter, parameter)
INVALID_PROCESS_ATTACH_ATTEMPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem with an owned mutex or
a mutex with a process already attached.
停止錯誤編號： 0x00000006 (parameter, parameter, parameter, parameter)
INVALID_PROCESS_DETACH_ATTEMPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem with an owned mutex or
an unclean asynchronous procedure call (APC) state.
停止錯誤編號： 0x00000007 (parameter, parameter, parameter, parameter)
INVALID_SOFTWARE_INTERRUPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a level not within the software
range.
停止錯誤編號： 0x00000008 (parameter, parameter, parameter, parameter) IRQL_NOT_DISPATCH_LEVEL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to remove a device not at
the dispatch level.
停止錯誤編號： 0x00000009 (parameter, parameter, parameter, parameter)
IRQL_NOT_GREATER_OR_EQUAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an IRQL that was expected to be
greater or equal, but was not.
停止錯誤編號： 0x0000000A (parameter, parameter, parameter, parameter) IRQL_NOT_LESS_OR_EQUAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to touch
pageable memory at a process IRQL (interrupt request level) that is too high. This is usually caused by drivers
using incorrect addresses. The fourth parameter in the message parameter list is the memory address at which the
fault happened. The second parameter shows the IRQL. If the IRQL was not equal to 2, then the interrupt most
likely came from a driver. Compare the memory address in the fourth parameter with the base addresses of the
drivers in the driver table on the STOP screen to find the driver that is the problem. Note that the third parameter
encodes read/write access (0 = read, 1= write).
停止錯誤編號： 0x0000000B (parameter, parameter, parameter, parameter)
NO_EXCEPTION_HANDLING_SUPPORT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that exception handling was not
supported.
停止錯誤編號： 0x0000000C (parameter, parameter, parameter, parameter)
MAXIMUM_WAIT_OBJECTS_EXCEEDED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that there are too many wait objects
in a wait multiple structure.
停止錯誤編號： 0x0000000D (parameter, parameter, parameter, parameter)
MUTEX_LEVEL_NUMBER_VIOLATION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to acquire a lower-level
mutex.
停止錯誤編號： 0x0000000E (parameter, parameter, parameter, parameter) NO_USER_MODE_CONTEXT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to enter user mode with
no context.
停止錯誤編號： 0x0000000F (parameter, parameter, parameter, parameter) SPIN_LOCK_ALREADY_OWNED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to acquire an owned spin
lock.
停止錯誤編號： 0x00000010 (parameter, parameter, parameter, parameter) SPIN_LOCK_NOT_OWNED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to release an unowned
spin lock.
停止錯誤編號： 0x00000011 (parameter, parameter, parameter, parameter) THREAD_NOT_MUTEX_OWNER
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to release a thread by a
mutex non-owner.
停止錯誤編號： 0x00000012 (parameter, parameter, parameter, parameter) TRAP_CAUSE_UNKNOWN
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a trap from an unknown cause.
停止錯誤編號： 0x00000013 (parameter, parameter, parameter, parameter) EMPTY_THREAD_REAPER_LIST
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the thread reaper list is corrupted
(the reaper list was signaled, but no threads were present on the list).
停止錯誤編號： 0x00000015 (parameter, parameter, parameter, parameter)
LAST_CHANCE_CALLED_FROM_KMODE
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that the last chance exception
service was called from kernel mode.
停止錯誤編號： 0x00000016 (parameter, parameter, parameter, parameter) CID_HANDLE_CREATION
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred creating a
handle to represent a client ID.
停止錯誤編號： 0x00000017 (parameter, parameter, parameter, parameter) CID_HANDLE_DELETION
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred deleting a
handle to represent a client ID.
停止錯誤編號： 0x00000018 (parameter, parameter, parameter, parameter) REFERENCE_BY_POINTER
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred while
referencing an object by what should have been a referenced pointer.
停止錯誤編號： 0x00000019 (parameter, parameter, parameter, parameter) BAD_POOL_HEADER
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates an invalid pool header.
停止錯誤編號： 0x0000001A (parameter, parameter, parameter, parameter) MEMORY_MANAGEMENT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a general memory management
problem.
停止錯誤編號： 0x0000001B (parameter, parameter, parameter, parameter) PFN_SHARE_COUNT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a memory management page
frame number (PFN) database element has a corrupted share count.
停止錯誤編號： 0x0000001C (parameter, parameter, parameter, parameter) PFN_REFERENCE_COUNT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a memory management page
frame number (PFN) database element has a corrupted reference count.
停止錯誤編號： 0x0000001D (parameter, parameter, parameter, parameter) NO_SPIN_LOCK_AVAILABLE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that no spin locks are available to
allocate.
停止錯誤編號： 0x0000001E (parameter, parameter, parameter, parameter)
KMODE_EXCEPTION_NOT_HANDLED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a kernel-mode exception was
not handled. The second parameter in the parameter list is the memory address at which the unhandled exception
occurred. Usually, the exception address pinpoints the driver/function that caused the problem. A common
problem is 0x80000003, which means a hard-coded breakpoint or assertion was hit but the system started
//NODEBUG.
停止錯誤編號： 0x0000001F (parameter, parameter, parameter, parameter)
SHARED_RESOURCE_CONV_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a shared resource conversion
problem.
停止錯誤編號： 0x00000020 (parameter, parameter, parameter, parameter)
KERNEL_APC_PENDING_DURING_EXIT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a kernel-mode asynchronous
procedure call (APC) was found pending during thread termination. The first parameter is the address of the APC
found pending during exit. The second parameter is the thread's APC disable count. And the third parameter is the
current IRQL (interrupt request level). If the thread's disable count is non-zero, it is the source of the problem: the
current IRQL should be 0. If it is not, a driver's cancellation routine returned at an elevated IRQL.
停止錯誤編號： 0x00000021 (parameter, parameter, parameter, parameter) QUOTA_UNDERFLOW
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that quota was returned to a process,
but that process was not using the amount of quota being returned.
停止錯誤編號： 0x00000022 (parameter, parameter, parameter, parameter) FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates a generic file system problem.
停止錯誤編號： 0x00000023 (parameter, parameter, parameter, parameter) FAT_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a FAT file system problem.
停止錯誤編號： 0x00000024 (parameter, parameter, parameter, parameter) NTFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an NTFS file system problem.
停止錯誤編號： 0x00000025 (parameter, parameter, parameter, parameter) NPFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a named pipe file system problem.
停止錯誤編號： 0x00000026 (parameter, parameter, parameter, parameter) CDFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates a CD-ROM file system problem.
停止錯誤編號： 0x00000027 (parameter, parameter, parameter, parameter) RDR_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a redirector file system problem.
停止錯誤編號： 0x00000028 (parameter, parameter, parameter, parameter) CORRUPT_ACCESS_TOKEN
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that the security system encountered
an invalid access token.
停止錯誤編號： 0x00000029 (parameter, parameter, parameter, parameter) SECURITY_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem internal to the security
system.
停止錯誤編號： 0x0000002A (parameter, parameter, parameter, parameter) INCONSISTENT_IRP
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that an IRP (I/O request packet) was
encountered in an inconsistent state. For example, some field or fields of the IRP were inconsistent with the
remaining state of the IRP.
停止錯誤編號： 0x0000002B (parameter, parameter, parameter, parameter) PANIC_STACK_SWITCH
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a panic switch to the kernel stack
because of stack overflow. This error might be caused by the kernel-mode driver using too much stack space. Or a
data corruption has occurred in the kernel.
停止錯誤編號： 0x0000002C (parameter, parameter, parameter, parameter) PORT_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in a port driver.
停止錯誤編號： 0x0000002D (parameter, parameter, parameter, parameter) SCSI_DISK_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in a SCSI hard disk
driver.
停止錯誤編號： 0x0000002E (parameter, parameter, parameter, parameter) DATA_BUS_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a data bus error which can be
caused by a parity error in the system memory. This error could also be caused by a driver accessing an address
that does not exist.
停止錯誤編號： 0x0000002F (parameter, parameter, parameter, parameter) INSTRUCTION_BUS_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an instruction bus error.
停止錯誤編號： 0x00000030 (parameter, parameter, parameter, parameter) SET_OF_INVALID_CONTEXT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to edit values of SS or
ESP when returning to kernel-mode code.
停止錯誤編號： 0x00000031 (parameter, parameter, parameter, parameter) PHASE0
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 0 (during phase 4 of system startup). There might be a hardware problem.
停止錯誤編號： 0x00000032 (parameter, parameter, parameter, parameter) PHASE1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.
停止錯誤編號： 0x00000033 (parameter, parameter, parameter, parameter)
UNEXPECTED_INITIALIZATION_CALL
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.
停止錯誤編號： 0x00000034 (parameter, parameter, parameter, parameter) CACHE_MANAGER
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.
停止錯誤編號： 0x00000035 (parameter, parameter, parameter, parameter)
NO_MORE_IRP_STACK_LOCATIONS
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that the I/O system detected a call
from one driver to another with no available IRP (I/O request packet) stack locations remaining in the packet for
the invoked driver to use. Other memory problems might accompany this error.
停止錯誤編號： 0x00000036 (parameter, parameter, parameter, parameter)
DEVICE_REFERENCE_COUNT_NOT_ZERO
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to delete a
device object whose reference count was non-zero. A non-zero reference count means that there are still
outstanding references to the device. There might be a problem in calling the device driver.
停止錯誤編號： 0x00000037 (parameter, parameter, parameter, parameter) FLOPPY_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a floppy disk driver internal error.
停止錯誤編號： 0x00000038 (parameter, parameter, parameter, parameter) SERIAL_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a serial device driver internal error.
停止錯誤編號： 0x00000039 (parameter, parameter, parameter, parameter) SYSTEM_EXIT_OWNED_MUTEX
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to exit a
system service while owning one or more mutexes.
停止錯誤編號： 0x0000003A (parameter, parameter, parameter, parameter)
SYSTEM_UNWIND_PREVIOUS_USER
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to unwind
through the system service dispatcher into user mode.
停止錯誤編號： 0x0000003B (parameter, parameter, parameter, parameter) SYSTEM_SERVICE_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception was raised in a system
service which was not handled by the system service.
停止錯誤編號： 0x0000003C (parameter, parameter, parameter, parameter)
INTERRUPT_UNWIND_ATTEMPTED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an unwind operation was initiated in
an interrupt service routine that attempted to unwind through the interrupt dispatcher.
停止錯誤編號： 0x0000003D (parameter, parameter, parameter, parameter)
INTERRUPT_EXCEPTION_NOT_HANDLED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception was raised in an
interrupt service routine which was not handled by the interrupt service routine.
停止錯誤編號： 0x0000003E (parameter, parameter, parameter, parameter)
MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the multiprocessor configuration is
not supported. For example, not all processors are at the same level or of the same type. There might also be
mismatched coprocessor support.
停止錯誤編號： 0x0000003F (parameter, parameter, parameter, parameter) NO_MORE_SYSTEM_PTES
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates no more system page table entries
(PTEs) exist for mapping non-paged entities.
停止錯誤編號： 0x00000040 (parameter, parameter, parameter, parameter) TARGET_MDL_TOO_SMALL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an MDL (memory descriptor list)
that was allocated to map a buffer is not large enough to contain the page frame numbers (PFNs) required to map
the desired buffer. There might be a problem with the driver.
停止錯誤編號： 0x00000041 (parameter, parameter, parameter, parameter) MUST_SUCCEED_POOL_EMPTY
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates there is no more must-succeed pool.
停止錯誤編號： 0x00000042 (parameter, parameter, parameter, parameter) ATDISK_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a hard disk device driver internal
error.
停止錯誤編號： 0x00000043 (parameter, parameter, parameter, parameter) NO_SUCH_PARTITION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a disk device driver called the I/O
system to change a partition type on a specified partition, but the partition does not exist.
停止錯誤編號： 0x00000044 (parameter, parameter, parameter, parameter)
MULTIPLE_IRP_COMPLETE_REQUESTS
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to complete an
IRP (I/O request packet) more than once, possibly by more than one driver.
停止錯誤編號： 0x00000045 (parameter, parameter, parameter, parameter)
INSUFFICIENT_SYSTEM_MAP_REGS
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that an attempt was made to allocate
more map registers than are allocated to an adapter.
停止錯誤編號： 0x00000046 (parameter, parameter, parameter, parameter)
DEREF_UNKNOWN_LOGON_SESSION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a token was deleted that was not
part of any known logon session.
停止錯誤編號： 0x00000047 (parameter, parameter, parameter, parameter)
REF_UNKNOWN_LOGON_SESSION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a token was created that was not
part of any known logon session.
停止錯誤編號： 0x00000048 (parameter, parameter, parameter, parameter)
CANCEL_STATE_IN_COMPLETED_IRP
解釋：
This is a Windows 2000 Executive character-mode STOP message. Indicates that an attempt was made to cancel an
IRP (I/O request packet), but the packet had already been completed so it was not possible to cancel it. There might
be a problem with the driver. Or, although unlikely, more than one driver might be accessing the same packet.
停止錯誤編號： 0x00000049 (parameter, parameter, parameter, parameter)
PAGE_FAULT_WITH_INTERRUPTS_OFF
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a page fault occurred while
interrupts were disabled.
停止錯誤編號： 0x0000004A (parameter, parameter, parameter, parameter)
IRQL_GT_ZERO_AT_SYSTEM_SERVICE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to exit from a system
service with an IRQL (interrupt request level) greater than 0.
停止錯誤編號： 0x0000004B (parameter, parameter, parameter, parameter) STREAMS_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates an internal error in the Streams
environment or in a Streams driver.
停止錯誤編號： 0x0000004C (parameter, parameter, parameter, parameter)
FATAL_UNHANDLED_HARD_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates a fatal hard error (STATUS
error) occurred before the hard error handler was available. There are several reasons why this error might occur: a
Registry hive file could not be loaded because it is either corrupted or missing; Winlogon or Windows
unexpectedly did not start; or a driver or system DLL is corrupted.
停止錯誤編號： 0x0000004D (parameter, parameter, parameter, parameter) NO_PAGES_AVAILABLE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that there are no physical pages
available.
停止錯誤編號： 0x0000004E (parameter, parameter, parameter, parameter) PFN_LIST_CORRUPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the memory management page file
number (PFN) list is corrupted.
停止錯誤編號： 0x0000004F (parameter, parameter, parameter, parameter) NDIS_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in the NDIS
wrapper or an NDIS driver.
停止錯誤編號： 0x00000050 (parameter, parameter, parameter, parameter)
PAGE_FAULT_IN_NONPAGED_AREA
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a page fault in the address space
reserved for nonpaged data.
停止錯誤編號： 0x00000051 (parameter, parameter, parameter, parameter) REGISTRY_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a Registry or configuration
manager problem. An I/O error might have occurred while the Registry was trying to read one of its files. This
could be caused by hardware or file system problems. This message might also appear because of a failure in a
refresh operation, which occurs when resource limits are encountered.
停止錯誤編號： 0x00000052 (parameter, parameter, parameter, parameter) MAILSLOT_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a mailslot file system problem.
停止錯誤編號： 0x00000053 (parameter, parameter, parameter, parameter) NO_BOOT_DEVICE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that no boot driver was successfully
initialized.
停止錯誤編號： 0x00000054 (parameter, parameter, parameter, parameter)
LM_SERVER_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in the Windows
2000 Server.
停止錯誤編號： 0x00000055 (parameter, parameter, parameter, parameter)
DATA_COHERENCY_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary data caches.
停止錯誤編號： 0x00000056 (parameter, parameter, parameter, parameter)
INSTRUCTION_COHERENCY_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary instruction caches.
停止錯誤編號： 0x00000057 (parameter, parameter, parameter, parameter) XNS_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an XNS internal error. You might
need to replace your network card.
停止錯誤編號： 0x00000058 (parameter, parameter, parameter, parameter) FTDISK_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary data caches. This is a fault-tolerant disk driver internal error.
停止錯誤編號： 0x00000059 (parameter, parameter, parameter, parameter) PINBALL_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary data caches. This is an HPFS problem.
停止錯誤編號： 0x0000005A (parameter, parameter, parameter, parameter) CRITICAL_SERVICE_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a critical service failed to
initialize while starting the LastKnownGood control set.
停止錯誤編號： 0x0000005B (parameter, parameter, parameter, parameter) SET_ENV_VAR_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a critical service failed to initialize,
but the LastKnownGood environment variable could not be set.
停止錯誤編號： 0x0000005C (parameter, parameter, parameter, parameter) HAL_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 initialization of the Hardware
Abstraction Layer (HAL) failed. This can only happen during the relatively short period of time that the Windows
2000 Executive is being initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x0000005D (parameter, parameter, parameter, parameter) UNSUPPORTED_PROCESSOR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that there is a processor present that
is not supported.
停止錯誤編號： 0x0000005E (parameter, parameter, parameter, parameter)
OBJECT_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 initialization of the object manager
failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being
initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x0000005F (parameter, parameter, parameter, parameter)
SECURITY_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 security initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x00000060 (parameter, parameter, parameter, parameter)
PROCESS_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 process initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x00000061 (parameter, parameter, parameter, parameter) HAL1_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 initialization of the Hardware
Abstraction Layer (HAL) failed. This can only happen during the relatively short period of time that the Windows
2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a
device driver.
停止錯誤編號： 0x00000062 (parameter, parameter, parameter, parameter) OBJECT1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 initialization of the object manager
failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being
initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000063 (parameter, parameter, parameter, parameter) SECURITY1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 security initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000064 (parameter, parameter, parameter, parameter)
SYMBOLIC_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Symbolic link initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000065 (parameter, parameter, parameter, parameter) MEMORY1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 memory initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000066 (parameter, parameter, parameter, parameter)
CACHE_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. 快取 initialization failed. This can only happen
during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of
Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000067 (parameter, parameter, parameter, parameter)
CONFIG_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Configuration initialization failed because the
Registry could not allocate the pool needed to contain the Registry files. This can only happen during the relatively
short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000
startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000068 (parameter, parameter, parameter, parameter) FILE_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. File system initialization failed. This can only
happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000069 (parameter, parameter, parameter, parameter) IO1_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 I/O initialization failed. This can only
happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x0000006A (parameter, parameter, parameter, parameter) LPC_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Local procedure call (LPC) initialization failed.
This can only happen during the relatively short period of time that the Windows 2000 Executive is being
initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x0000006B (parameter, parameter, parameter, parameter) PROCESS1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 process initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x0000006C (parameter, parameter, parameter, parameter)
REFMON_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Reference monitor initialization failed. This can
only happen during the relatively short period of time that Windows 2000 Executive is being initialized. There
might be a problem with a device driver.
停止錯誤編號： 0x0000006D (parameter, parameter, parameter, parameter) SESSION1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Session manager virtual memory allocation
parameters failed during session manager initialization. This can only happen during the relatively short period of
time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might
be a problem with a device driver.
停止錯誤編號： 0x0000006E (parameter, parameter, parameter, parameter) SESSION2
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. The session manager virtual memory
environment failed to initialize. This can only happen during the relatively short period of time that the Windows
2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a
device driver.
停止錯誤編號： 0x0000006F (parameter, parameter, parameter, parameter) SESSION3
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Session manager process creation failed. This
can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized,
during phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000070 (parameter, parameter, parameter, parameter) SESSION4
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. During session manager initialization, a resume
thread operation failed. This can only happen during the relatively short period of time that the Windows 2000
Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device
driver.
停止錯誤編號： 0x00000071 (parameter, parameter, parameter, parameter) SESSION5
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. During phase 1 initialization of the Windows
2000 Executive, the session manager terminated. This can only happen during the relatively short period of time
that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a
problem with a device driver.
停止錯誤編號： 0x00000072 (parameter, parameter, parameter, parameter)
ASSIGN_DRIVE_LETTERS_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a drive letter assignment failed.
停止錯誤編號： 0x00000073 (parameter, parameter, parameter, parameter) CONFIG_LIST_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration link list
failed. One of the core system hives is corrupted or unreadable, or some critical Registry keys and values are not
present.
停止錯誤編號： 0x00000074 (parameter, parameter, parameter, parameter) BAD_SYSTEM_CONFIG_INFO
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration
information is corrupted.
停止錯誤編號： 0x00000075 (parameter, parameter, parameter, parameter)
CANNOT_WRITE_CONFIGURATION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration
information cannot be written. The system hive files cannot be expanded to accommodate new data written to it
between Registry initialization and phase 1 initialization. There might be no free space on the drive.
停止錯誤編號： 0x00000076 (parameter, parameter, parameter, parameter) PROCESS_HAS_LOCKED_PAGES
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a process terminated with pages
locked for I/O.
停止錯誤編號： 0x00000077 (parameter, parameter, parameter, parameter)
KERNEL_STACK_INPAGE_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an I/O error during a kernel stack
paging operation. The requested page of kernel data could not be read in. This is caused by a bad block in the
paging file or by a disk controller error. If the error was caused by a bad block, when your system is restarted,
Autocheck will run and attempt to find the bad sector.
停止錯誤編號： 0x00000078 (parameter, parameter, parameter, parameter) PHASE0_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception during phase 0 of the
Windows 2000 Executive initialization.
停止錯誤編號： 0x00000079 (parameter, parameter, parameter, parameter) Mismatched kernel and hal image.
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a mismatched kernel and Hardware
Abstraction Layer (HAL) image.
停止錯誤編號： 0x0000007A (parameter, parameter, parameter, parameter)
KERNEL_DATA_INPAGE_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message.
停止錯誤編號： 0x0000007B (parameter, parameter, parameter, parameter) INACCESSIBLE_BOOT_DEVICE
解釋：
This is a Windows 2000 Executive character-mode STOP message. During I/O system initialization, the driver for
the boot device might have failed to initialize the device the system is attempting to start from. It is also possible
that the file system failed to initialize because it did not recognize the data on the boot device. If this error occurs
during initial system setup, the system might have been installed on an unsupported disk or SCSI controller. Also,
this error might occur because of the installation of a new SCSI adapter or disk controller or if the disk was
repartitioned with the system partition.
停止錯誤編號： 0x0000007D (parameter, parameter, parameter, parameter) INSTALL_MORE_MEMORY
解釋：
This is a Windows 2000 Executive character-mode STOP message. Windows 2000 requires at least 5 MB of
memory to start.
停止錯誤編號： 0x0000007F (parameter, parameter, parameter, parameter)
UNEXPECTED_KERNEL_MODE_TRAP
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a trap occurred in kernel mode.
停止錯誤編號： 0x00000081 (parameter, parameter, parameter, parameter) SPIN_LOCK_INIT_FAILURE
解釋：
This is a Windows 2000 Executive character-mode STOP message.
停止錯誤編號： 0x00000082 (parameter, parameter, parameter, parameter) DFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a Distributed file system (Dfs)
problem.
停止錯誤編號： 0x00000083 (parameter, parameter, parameter, parameter) OFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an OFS file system problem.
停止錯誤編號： 0x00000084 (parameter, parameter, parameter, parameter) RECOM_DRIVER
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a RECOM driver problem.
停止錯誤編號： 0x00000085 (parameter, parameter, parameter, parameter) SETUP_FAILURE
Windows 2000/Xp 顯示藍色當機之STOP詳解
1.停止錯誤編號:0x0000000A
說明文字：IRQL-NOT-LESS-OR-EQUAL
通常的原因：驅動程式使用了不正確的記憶體位址.
解決方法：如果無法登陸,則重新啟動電腦.當出現可用的作系統列表時,按F8鍵.在Windows進階選
項表單螢幕上,選項"最後一次正確的配置",然後按Enter鍵鍵.
檢查是否正確安裝了所有的新硬體或軟體.如果這是一次全新安裝,請與硬體或軟體的製造商聯繫,
獲得可能需要的任何Windows更新或驅動程式.
執行由電腦製造商提供的所有的系統診斷軟體,尤其是記憶體檢查.
禁用或卸掉新近安裝的硬體(RAM,橋接器,硬碟,調製解調器等等),驅動程式或軟體.
確保硬體設備驅動程式和系統BIOS都是最新的版本.確保製造商可說明 你是否具有最新版本,也可
說明 你獲得這些軟體.
禁用BIOS記憶體選項,例如cache或shadow.
2.停止錯誤編號：0x0000001E
說明文字：KMODE-EXPTION-NOT-HANDLED
通常的原因：內核模式工作試圖執行一個非法或未知的處理器指令.
解決方法：確保有足夠的空間,尤其是在執行一次新安裝的時候.如果停止錯誤消息指出了某個特定
的驅動程式,那麼禁用他.如果無法啟動電腦.應試著用安全模式啟動,以便刪除或禁用該驅動程式.
如果有非 Microsoft支持的視瀕驅動程式,盡量切換到標準的VGA驅動程式或Windows提供的適當驅
動程式.
禁用所有新近安裝的驅動程式.
確保有最新版本的系統BIOS.硬體製造商可說明 確定你是否具有最新版本,也可以說明 你獲得他.
禁用BIOS記憶體選項,例如cache,shadow.
3.停止錯誤編號：0x00000023或0x00000024
說明文字：FAT-FILE-SYSTEM 或 NTFS-FILE-SYSTEM
通常原因：問題出現在 Ntfs.sys (允許系統讀寫NTFS驅動器的驅動程式文件)內.
解決方法：執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體.
禁用或卸載所有的反病毒軟體,磁碟重組程式或制作備份程序.
通過在命令提示字元下執行Chkdsk /f指令檢查硬碟驅動器是否損壞,然後重新啟動電腦.
4.停止編號：0x0000002E
說明文字：DATA-BUS-ERROR
通常的原因：系統記憶體奇偶校驗出錯,通常由硬體問題導致.
解決方法：卸掉所有新近安裝的硬體(RAM.橋接器.硬碟.調製解調器等等).
執行由電腦製造商提供的系統診斷軟體,尤其是硬體診斷軟體.
確保硬體設備驅動程式和系統BIOS都是最新版本.
使用硬體供應商提供的系統診斷,執行記憶體檢查來搜尋故障或不匹配的記憶體.
禁用BIOS記憶體選項,例如cache或shadow.
在啟動後出現可用作系統列表時,按F8.在Windows進階選項表單螢幕上,選項"啟動VGA模式，然後
按Enter鍵鍵.如果這樣做還不能解決問題,可能需要更換不同的視瀕橋接器列表,有關支持的視瀕橋接器
列表,請參閱硬體相容性列表.
5.停止編號：0x0000003F
說明文字：NO-MOR-SYSTEM-PTES
通常的原因：沒有正確清理驅動程式.
解決方法：禁用或卸載所有的反病毒軟體，磁牒碎片處理程序或制作備份程序.
6.停止錯誤編號：0x00000058
說明文字：FTDISK-INTERN-ERROR
通常的原因：容錯集內的某個主驅動器發生故障.
解決方法：使用Windows安裝碟啟動電腦,從鏡象(第2)系統驅動器引導.有關如何編輯Boot.ini文件以
指向鏡象系統驅動器的指導,可在本站的其他文章中尋找。
7.停止錯誤編號：0x0000007B
說明文字：INACCESSI-BLE-BOOT-DEVICE
通常原因：啟始化 I/O 系統(通常是指引導設備或文件系統)失敗.
解決方法：啟始扇區病毒通常會導致這種停止錯誤.是用反病毒軟體的最新版本,檢查電腦上是否有
存在病毒.如果找到病毒,則必須執行必要的不找把他從電腦上清除掉,請參閱反病毒軟體我的文件瞭解
如何執行這些步驟.
卸下所有新近安裝的硬體(RAM,橋接器,調製解調器等等).
核對MIcrosoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.
如果使用的適SCSI橋接器,可以從硬體供應商除獲得最新WINDOWS驅動程式,禁用SCSI設備的同步
協商,檢查該SCSI鏈是否終結,並核對這些設備的SCSIID,如果無法確定如何執行能夠這些步驟,可參考硬
體設備的我的文件.
如果你用的是IDE設備,將板上的IDE連接阜定義為唯一的主連接阜.核對IDE設備的主/從/唯一設置.
卸掉除硬碟之外的所有IDE設備.如果無法驗證如何執行這些不找，可參考硬體我的文件.
如果電腦已使用NTFS文件系統格式化,可重新啟動電腦,然後在該系統分區上執行Chkdsk/f/r指令.如
果由於錯誤而無法啟動系統,那麼使用指令控制台,並執行Chkdsk /r指令.
執行Chkdsk /f指令以確定文件系統是否損壞.如果Windows不能執行Chkdsk指令,將驅動器移動到其
他執行Windows的電腦上,然後從這台電腦上對該驅動器執行Chkdsk指令.
8.停止錯誤編號：0x0000007F
說明文字：UNEXPECTED-KERNEL-MODE-TRAP
通常的原因：通常是由於硬體或軟體問題導致,但一般都由硬體故障引起的.
解決方法：核對Microsoft硬體相容性列表以確保所有的硬體和驅動程式都與Windows相容.如果電
腦主機板不相容就會產生這個問題.
卸掉所由新近安裝的硬體.
執行由電腦製造商提供的所有系統診斷軟體,尤其是記憶體檢查.
禁用BIOS記憶體選項,例如cache或shadow.
9.停止錯誤編號：0x00000050
說明文字：PAGE-FAULT-IN-NONPAGED-AREA
通常的原因：記憶體錯誤(資料不能使用分頁文件交換到磁牒中).
解決方法：卸掉所有的新近安裝的硬體.
執行由電腦製造商提供的所有系統診斷軟體.尤其是記憶體檢查.
檢查是否正確安裝了所有新硬體或軟體,如果這是一次全新安裝,請與硬體或軟體製造商聯繫,獲得
可能需要的任何Windows更新或驅動程式.
禁用或卸載所有的反病毒程序.
禁用BIOS記憶體選項,例如cache或shadow.
10.停止錯誤編號：0x0000077
說明文字：KERNEL-STEL-STACK-INPAGE-ERROR
通常的原因：無法從分頁文件將內核資料所需的頁面讀取到記憶體中。
解決方法：使用反病毒軟體的最新版本，檢查電腦上是否有病毒。如果找到病毒，則執行必要的
步驟把他從電腦上清除掉。請參閱製造商提供的所有系統診斷軟體，尤其是記憶體檢查。
禁用BIOS記憶體選項，例如cache,shadow
11.停止錯誤編號：0x00000079
說明文字：MISMATCHED-HAL
通常的原因：硬體抽像層與內核或機器類型不匹配（通常發生在單處理器和多處理器配置文件混
合在同一系統的情況下）。
解決方法：要解決本錯誤，可使用指令控制台替換電腦上錯誤的系統檔案。
單處理器系統的內核文件是Ntoskml.exe，而多處理器系統的內核文件是Ntkrnlmp.exe，但是，這些文件
要與安裝媒體上的文件相對應；在安裝完Windows2000和，不論使用的是哪個原文件，都會被重命名
為Ntoskrnl.exe文件。HAL文件在安裝之後也使用名稱Hal.dll但是在安裝媒體，但是在安裝媒體上卻有若
干個可能的HAL文件。
12.停止錯誤編號：0x0000007A
說明文字：KERNEL-DATA-INPAGE-ERROR
通常的原因：無法從分頁文件將內核資料所需的頁面讀取到記憶體中。（通常是由於分頁文件上
的故障，病毒，磁牒控制器錯誤或由故障的RAM引起的）。
解決方法：使用反病毒軟體的最新版本，檢查電腦上是否存在病毒。如果找到病毒。則執行必要
的步驟把他從電腦上清除掉，請參閱犯病度軟體我的文件瞭解如何執行這些步驟。
如果電腦已使用NTFS文件系統格式化。可重新啟動電腦，然後在該系統分區上執行Chkdsk/f/r指
令。如果由於錯誤而無法啟動指令，那麼使用指令控制台，並執行Chkdsk /r指令。
執行由電腦製造商提供的所有的系統在很端軟體，尤其是記憶體檢查。
13.停止錯誤編號：0xC000021A
說明文字：STATUS-SYSTEM-PROCESS-TERMINATED
通常的原因：用戶模式子系統，例如Winlogon或客戶伺服器執行時子系統（CSRSS）已被損壞，
所以無法再保證安全性。
解決方法：卸掉所有新近安裝的硬體。
如果無法登陸，則重新啟動電腦。當出現可用的作系統列表時按F8，在Windows2000進階選項表
單螢幕上，選項：「最後一次正確的配置」。然後按Enter鍵。
執行故障恢復台，並允許系統修復任何檢測到的錯誤。
14.停止錯誤編號：0xC0000221
說明文字：STATUS-IMAGE-CHECKISU7M-MISMATCH
通常的原因：驅動程式或系統DLL已經被損壞。
解決方法：執行故障復控台，並且允許系統修復任何檢測到的錯誤。
如果在RAM增加到電腦之後，立即發生錯誤，那麼可能是分頁文件損壞，或者新RAM由故障或不
相容。刪除pagefile.sys並將系統返回到原來的RAM配置。
理解 Windows 2000 中的顯示藍色當機(BSOD)現象
理解 Windows 2000 中的顯示藍色當機(BSOD)現象
Brien M. Posey
翻譯:Batman
Windows 2000 也許可以說得上是一個劃時代的操作系統，但是它仍然不能夠避免顯示藍色當機
（Blue Screen of Death）問題。本文的目的是解刨BSOD問題，同時給出如何處理一般的顯示藍色問題
的解決步驟。
一 簡介
什麼是顯示藍色當機（BSOD）問題？
BSOD就是顯示在藍色螢幕背景下的出錯信息。一般這種出錯信息嚴重到你的整個操作系統當機，
你只有重新冷啟動的選項。
停止消息和硬體消息
Win2000的BSOD和NT4以前的BSOD消息是完全不同的。最大的不同就是NT中的BSOD只包含一個
通用的停止消息類型(就是實際的出錯程式碼), 但是Win2000的BSOD包含有兩種消息類型：停止消息和
硬體消息。
停止消息是指，當win2000的內核發現一個它不能夠恢復的軟體錯誤時候產生的錯誤消息。
硬體消息是指，當Win2000發現一個嚴重的硬體衝突時產生的錯誤消息。
二 刨析BSOD
BSOD可以分成獨立的幾部分，每部分包含有有價值的錯誤處理信息。這幾部分包括：
1.bug檢查部分：這是BSOD中包含實際出錯消息的位置。在這部分中，你應該注意的是出錯程式
碼（就是在單詞「Stop」後面的十六進制數字）和錯誤符號（就是緊跟在出錯程式碼後的單詞）。
2.推薦用戶採取行動部分：這部分經常包含一些一般的指導你如何糾正錯誤的步驟的消息。
3.偵錯連接阜信息部分：這部分包含有你應該如何設置你的內核偵錯器的信息。內核偵錯器是讓
你可以通過手工連線到電腦並對工作進行偵錯的工具。
停止信息的四種類型：
當程序或則驅動程式發生了一個不能夠控制的錯誤消息或則試圖執行一個非法指令時，系統就會
發生停止出錯信息。而這種信息通常由四種類型組成：
1.一般停止消息：在正常的使用win2000時發生的停止消息。
2.安裝停止消息：在安裝win2000程序中的停止消息，通常由你的系統中存在和2000不相容的硬體
設備引起的。
3.可執行程序安裝停止消息：表示發生在2000安裝程序中第4個階段（執行程序部分）的停止消
息。
4.軟體陷阱停止消息：由於軟體中的錯誤陷阱並且當程序試圖執行一個非法指令的時候發生的停
止消息。
不管win2000是否迄今為止最偉大的操作系統與否，它不可能是沒有錯誤的。至少我們知道在2000
中，BSOD還是存在的。下面是一個具體的BSOD例子：
*** Stop: 0x0000001E (0xF24A447A, 0X00000001, 0X0000000)
KMODE_EXCEPTION_NOT_HANDLED
*** Address F24A447A base at f24A0000, DateStamp 35825ef8d - wdmaud.
sys
If this is the first time you've seen this Stop error screen, restart your computer.If this screen appears again, follow
these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or
check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or
shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to
select Advanced Startup Options, and then select Safe Mode.
Refer to your Getting Started manual for more information on troubleshooting Stop errors.
Kernel Debugger Using: COM2 (Port 0x2f8, Baud Rate 19200)
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or
technical support group.
根據這個具體的例子，按照上面刨析的BSOD四個部分，下面一一介紹：
bug檢查部分：
這是BSOD中包含實際出錯消息的位置。它看上去就是下面的程式碼：
*** Stop: 0x0000001E (0xF24A447A, 0X00000001, 0X0000000)
KMODE_EXCEPTION_NOT_HANDLED
*** Address F24A447A base at f24A0000, DateStamp 35825ef8d - wdmaud.
sys
其中錯誤程式碼是一個緊跟在Stop後面的十六進制數，在這裡面它由其它四個數字組成。
而錯誤符號是指緊隨其後的KMODE_EXCEPTION_NOT_HANDLED.
在一些BSOD出錯信息中，一個記憶體位置和檔案名出現在錯誤符號的後面。這個信息告訴了當錯
誤發生的時候在記憶體中的位置和哪個文件導致了錯誤的發生。當然你是否能夠看到該信息是由哪種
停止消息類型來決定的。在一些實際運用中，你只能夠看到上面的第一行。而這裡通常是表示由顯示
服務中導致的問題。
推薦用戶採取行動部分：
在上面的例子中推薦用戶採取行動部分如下：
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again,
follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message,
disable the driver or check with the manufacturer for driver updates. Try changing video adapters. Check with
your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you
need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced
Startup Options, and then select Safe Mode. Refer to your Getting Started manual for more information on
troubleshooting Stop errors.
推薦用戶採取行動部分通常是推薦用戶在遇到了出錯信息後應該採取的解決步驟。在消息中可以
看到，解決一個BSOD也許只要重新啟動或則整理出足夠大的剩餘空間就能夠解決了。儘管這樣的方法
偶爾會起到作用，但是實際上要解決BSOD經常要遠遠複雜得多。
偵錯連接阜信息部分：
這部分包含有你應該如何設置你的內核偵錯器的信息。我會在以後的網站裡面詳細介紹什麼是
2000的內核偵錯器。在上面的例子中，這部分內容是：
Kernel Debugger Using: COM2 (Port 0x2f8, Baud Rate 19200)
Beginning dump of physical memory
Physical memory dump complete. Contact your system administrator or technical support group.
停止信息的四種類型
一般停止消息：
一般停止消息通常是最難解決的出錯信息，因為有可能有無數的原因能夠導致錯誤的發生。
安裝停止消息：
在安裝win2000程序中的停止消息，通常由你的系統中存在有沒有列在2000硬體相容列表中的設
備。解決辦法是你檢視系統中的硬體設備，找到沒有列出在2000相容列表中的設備。然後和你的硬體
設備廠商聯繫看他們是否能夠給你提供該設備的驅動程式。如果他們不能，那你只好從你的系統中刪
除該設備，並用其它的可以相容的設備替換掉。如果你的所有硬體都是相容的，你也許是存在有兩個
互相衝突的硬體設備。要解決這個問題，先移走任何不是必要的硬體設備，然後重新裝載2000，一旦
2000裝載成功後，把 所有移走的設備全部重新加入到系統中。這樣做，通常能夠解決這個問題，至少
能夠告訴你哪些硬體是有衝突的。
可執行程序安裝停止消息：
安裝2000在可執行程序的安裝程序中有兩個階段。第一個階段是禁止硬體中斷同時裝載一些基本
的組件， 例如硬體提取層。第二個階段是啟始化你系統中所有的硬體。如果你在安裝程序到了這個階
段的時候收到了停止消息錯誤。需要再次執行診斷程序，來判斷你的硬體是否都工作正常。然後重新
安裝2000。如果你仍然遇到這個出錯消息，那麼就需要和微軟技術支持部打交道了。
軟體陷阱停止消息：
由於軟體中的錯誤陷阱並且當程序試圖執行一個非法指令的時候發生的停止消息。例如，程序試
圖向一個本來是儲存數字的變量寫字串串的時候，這個錯誤就有可能發生。如果你遇到了這種類型的
錯誤，需要記下出錯信息，是什麼軟體導致了錯誤，一般這些軟體都有新的版本來糾正這些錯誤的。
三 解決問題的技巧
下面是當你遇到了停止消息時候可能需要的解決步驟：
首先判斷你最近是不是在系統中有任何的變動。如果你有，那麼這些變動經常是問題產生的根
源。試圖刪除或者移走新的硬體或軟體，看是否能夠解決問題。檢查系統中的硬體，最好如果有硬體
檢測程式的話，可以執行該程序進行檢測，同時重新插放你的記憶體卡和擴展卡。如果你的停止信息
是發生在啟動中或剛啟動的程序中，那麼這有可能是你的某個服務或則設備驅動程式中的問題。可以
嘗試將機器啟動到安全模式。如果你的2000系統能夠啟動成功安全模式，那麼表示你的猜測是正確
的。同時要確保你的防病毒程序是設計成和win2000相容的，並且隨時保持更新。如果錯誤仍然發生，
那麼進入你的CMOS設置，禁止掉BIOS中的象緩衝或則shadow之類的選項，然後重新啟動。
Windows 2000 的停止錯誤編號及其解釋
Windows 2000 的停止錯誤編號及其解釋
整理 CptFan
停止錯誤編號： 0x00000001 (parameter, parameter, parameter, parameter) APC_INDEX_MISMATCH
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a mismatch of thread and
asynchronous procedure call (APC) indexes. The most common reason to see this message is if a file system has a
mismatched number of KeEnterCriticalRegion compared to KeLeaveCriticalRegion.
停止錯誤編號： 0x00000002 (parameter, parameter, parameter, parameter) DEVICE_QUEUE_NOT_BUSY
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a device queue was expected to
be busy, but was not.
停止錯誤編號： 0x00000003 (parameter, parameter, parameter, parameter) INVALID_AFFINITY_SET
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a null of nonproper subset affinity.
停止錯誤編號： 0x00000004 (parameter, parameter, parameter, parameter) INVALID_DATA_ACCESS_TRAP
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an invalid data access trap.
停止錯誤編號： 0x00000005 (parameter, parameter, parameter, parameter)
INVALID_PROCESS_ATTACH_ATTEMPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem with an owned mutex or
a mutex with a process already attached.
停止錯誤編號： 0x00000006 (parameter, parameter, parameter, parameter)
INVALID_PROCESS_DETACH_ATTEMPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem with an owned mutex or
an unclean asynchronous procedure call (APC) state.
停止錯誤編號： 0x00000007 (parameter, parameter, parameter, parameter)
INVALID_SOFTWARE_INTERRUPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a level not within the software
range.
停止錯誤編號： 0x00000008 (parameter, parameter, parameter, parameter) IRQL_NOT_DISPATCH_LEVEL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to remove a device not at
the dispatch level.
停止錯誤編號： 0x00000009 (parameter, parameter, parameter, parameter)
IRQL_NOT_GREATER_OR_EQUAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an IRQL that was expected to be
greater or equal, but was not.
停止錯誤編號： 0x0000000A (parameter, parameter, parameter, parameter) IRQL_NOT_LESS_OR_EQUAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to touch
pageable memory at a process IRQL (interrupt request level) that is too high. This is usually caused by drivers
using incorrect addresses. The fourth parameter in the message parameter list is the memory address at which the
fault happened. The second parameter shows the IRQL. If the IRQL was not equal to 2, then the interrupt most
likely came from a driver. Compare the memory address in the fourth parameter with the base addresses of the
drivers in the driver table on the STOP screen to find the driver that is the problem. Note that the third parameter
encodes read/write access (0 = read, 1= write).
停止錯誤編號： 0x0000000B (parameter, parameter, parameter, parameter)
NO_EXCEPTION_HANDLING_SUPPORT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that exception handling was not
supported.
停止錯誤編號： 0x0000000C (parameter, parameter, parameter, parameter)
MAXIMUM_WAIT_OBJECTS_EXCEEDED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that there are too many wait objects
in a wait multiple structure.
停止錯誤編號： 0x0000000D (parameter, parameter, parameter, parameter)
MUTEX_LEVEL_NUMBER_VIOLATION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to acquire a lower-level
mutex.
停止錯誤編號： 0x0000000E (parameter, parameter, parameter, parameter) NO_USER_MODE_CONTEXT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to enter user mode with
no context.
停止錯誤編號： 0x0000000F (parameter, parameter, parameter, parameter) SPIN_LOCK_ALREADY_OWNED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to acquire an owned spin
lock.
停止錯誤編號： 0x00000010 (parameter, parameter, parameter, parameter) SPIN_LOCK_NOT_OWNED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to release an unowned
spin lock.
停止錯誤編號： 0x00000011 (parameter, parameter, parameter, parameter) THREAD_NOT_MUTEX_OWNER
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to release a thread by a
mutex non-owner.
停止錯誤編號： 0x00000012 (parameter, parameter, parameter, parameter) TRAP_CAUSE_UNKNOWN
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a trap from an unknown cause.
停止錯誤編號： 0x00000013 (parameter, parameter, parameter, parameter) EMPTY_THREAD_REAPER_LIST
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the thread reaper list is corrupted
(the reaper list was signaled, but no threads were present on the list).
停止錯誤編號： 0x00000015 (parameter, parameter, parameter, parameter)
LAST_CHANCE_CALLED_FROM_KMODE
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that the last chance exception
service was called from kernel mode.
停止錯誤編號： 0x00000016 (parameter, parameter, parameter, parameter) CID_HANDLE_CREATION
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred creating a
handle to represent a client ID.
停止錯誤編號： 0x00000017 (parameter, parameter, parameter, parameter) CID_HANDLE_DELETION
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred deleting a
handle to represent a client ID.
停止錯誤編號： 0x00000018 (parameter, parameter, parameter, parameter) REFERENCE_BY_POINTER
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates that a failure occurred while
referencing an object by what should have been a referenced pointer.
停止錯誤編號： 0x00000019 (parameter, parameter, parameter, parameter) BAD_POOL_HEADER
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates an invalid pool header.
停止錯誤編號： 0x0000001A (parameter, parameter, parameter, parameter) MEMORY_MANAGEMENT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a general memory management
problem.
停止錯誤編號： 0x0000001B (parameter, parameter, parameter, parameter) PFN_SHARE_COUNT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a memory management page
frame number (PFN) database element has a corrupted share count.
停止錯誤編號： 0x0000001C (parameter, parameter, parameter, parameter) PFN_REFERENCE_COUNT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a memory management page
frame number (PFN) database element has a corrupted reference count.
停止錯誤編號： 0x0000001D (parameter, parameter, parameter, parameter) NO_SPIN_LOCK_AVAILABLE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that no spin locks are available to
allocate.
停止錯誤編號： 0x0000001E (parameter, parameter, parameter, parameter)
KMODE_EXCEPTION_NOT_HANDLED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a kernel-mode exception was
not handled. The second parameter in the parameter list is the memory address at which the unhandled exception
occurred. Usually, the exception address pinpoints the driver/function that caused the problem. A common
problem is 0x80000003, which means a hard-coded breakpoint or assertion was hit but the system started
//NODEBUG.
停止錯誤編號： 0x0000001F (parameter, parameter, parameter, parameter)
SHARED_RESOURCE_CONV_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a shared resource conversion
problem.
停止錯誤編號： 0x00000020 (parameter, parameter, parameter, parameter)
KERNEL_APC_PENDING_DURING_EXIT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a kernel-mode asynchronous
procedure call (APC) was found pending during thread termination. The first parameter is the address of the APC
found pending during exit. The second parameter is the thread's APC disable count. And the third parameter is the
current IRQL (interrupt request level). If the thread's disable count is non-zero, it is the source of the problem: the
current IRQL should be 0. If it is not, a driver's cancellation routine returned at an elevated IRQL.
停止錯誤編號： 0x00000021 (parameter, parameter, parameter, parameter) QUOTA_UNDERFLOW
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that quota was returned to a process,
but that process was not using the amount of quota being returned.
停止錯誤編號： 0x00000022 (parameter, parameter, parameter, parameter) FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates a generic file system problem.
停止錯誤編號： 0x00000023 (parameter, parameter, parameter, parameter) FAT_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a FAT file system problem.
停止錯誤編號： 0x00000024 (parameter, parameter, parameter, parameter) NTFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an NTFS file system problem.
停止錯誤編號： 0x00000025 (parameter, parameter, parameter, parameter) NPFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a named pipe file system problem.
停止錯誤編號： 0x00000026 (parameter, parameter, parameter, parameter) CDFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates a CD-ROM file system problem.
停止錯誤編號： 0x00000027 (parameter, parameter, parameter, parameter) RDR_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a redirector file system problem.
停止錯誤編號： 0x00000028 (parameter, parameter, parameter, parameter) CORRUPT_ACCESS_TOKEN
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that the security system encountered
an invalid access token.
停止錯誤編號： 0x00000029 (parameter, parameter, parameter, parameter) SECURITY_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a problem internal to the security
system.
停止錯誤編號： 0x0000002A (parameter, parameter, parameter, parameter) INCONSISTENT_IRP
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that an IRP (I/O request packet) was
encountered in an inconsistent state. For example, some field or fields of the IRP were inconsistent with the
remaining state of the IRP.
停止錯誤編號： 0x0000002B (parameter, parameter, parameter, parameter) PANIC_STACK_SWITCH
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a panic switch to the kernel stack
because of stack overflow. This error might be caused by the kernel-mode driver using too much stack space. Or a
data corruption has occurred in the kernel.
停止錯誤編號： 0x0000002C (parameter, parameter, parameter, parameter) PORT_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in a port driver.
停止錯誤編號： 0x0000002D (parameter, parameter, parameter, parameter) SCSI_DISK_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in a SCSI hard disk
driver.
停止錯誤編號： 0x0000002E (parameter, parameter, parameter, parameter) DATA_BUS_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a data bus error which can be
caused by a parity error in the system memory. This error could also be caused by a driver accessing an address
that does not exist.
停止錯誤編號： 0x0000002F (parameter, parameter, parameter, parameter) INSTRUCTION_BUS_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an instruction bus error.
停止錯誤編號： 0x00000030 (parameter, parameter, parameter, parameter) SET_OF_INVALID_CONTEXT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to edit values of SS or
ESP when returning to kernel-mode code.
停止錯誤編號： 0x00000031 (parameter, parameter, parameter, parameter) PHASE0
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 0 (during phase 4 of system startup). There might be a hardware problem.
停止錯誤編號： 0x00000032 (parameter, parameter, parameter, parameter) PHASE1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.
停止錯誤編號： 0x00000033 (parameter, parameter, parameter, parameter)
UNEXPECTED_INITIALIZATION_CALL
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.
停止錯誤編號： 0x00000034 (parameter, parameter, parameter, parameter) CACHE_MANAGER
解釋：
This is a Windows 2000 Executive character-mode STOP message. Initialization of the Windows 2000 Executive
failed during phase 1 (during phase 4 of system startup). There might be a problem with a device driver.
停止錯誤編號： 0x00000035 (parameter, parameter, parameter, parameter)
NO_MORE_IRP_STACK_LOCATIONS
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that the I/O system detected a call
from one driver to another with no available IRP (I/O request packet) stack locations remaining in the packet for
the invoked driver to use. Other memory problems might accompany this error.
停止錯誤編號： 0x00000036 (parameter, parameter, parameter, parameter)
DEVICE_REFERENCE_COUNT_NOT_ZERO
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to delete a
device object whose reference count was non-zero. A non-zero reference count means that there are still
outstanding references to the device. There might be a problem in calling the device driver.
停止錯誤編號： 0x00000037 (parameter, parameter, parameter, parameter) FLOPPY_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a floppy disk driver internal error.
停止錯誤編號： 0x00000038 (parameter, parameter, parameter, parameter) SERIAL_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a serial device driver internal error.
停止錯誤編號： 0x00000039 (parameter, parameter, parameter, parameter) SYSTEM_EXIT_OWNED_MUTEX
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to exit a
system service while owning one or more mutexes.
停止錯誤編號： 0x0000003A (parameter, parameter, parameter, parameter)
SYSTEM_UNWIND_PREVIOUS_USER
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to unwind
through the system service dispatcher into user mode.
停止錯誤編號： 0x0000003B (parameter, parameter, parameter, parameter) SYSTEM_SERVICE_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception was raised in a system
service which was not handled by the system service.
停止錯誤編號： 0x0000003C (parameter, parameter, parameter, parameter)
INTERRUPT_UNWIND_ATTEMPTED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an unwind operation was initiated in
an interrupt service routine that attempted to unwind through the interrupt dispatcher.
停止錯誤編號： 0x0000003D (parameter, parameter, parameter, parameter)
INTERRUPT_EXCEPTION_NOT_HANDLED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception was raised in an
interrupt service routine which was not handled by the interrupt service routine.
停止錯誤編號： 0x0000003E (parameter, parameter, parameter, parameter)
MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the multiprocessor configuration is
not supported. For example, not all processors are at the same level or of the same type. There might also be
mismatched coprocessor support.
停止錯誤編號： 0x0000003F (parameter, parameter, parameter, parameter) NO_MORE_SYSTEM_PTES
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates no more system page table entries
(PTEs) exist for mapping non-paged entities.
停止錯誤編號： 0x00000040 (parameter, parameter, parameter, parameter) TARGET_MDL_TOO_SMALL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an MDL (memory descriptor list)
that was allocated to map a buffer is not large enough to contain the page frame numbers (PFNs) required to map
the desired buffer. There might be a problem with the driver.
停止錯誤編號： 0x00000041 (parameter, parameter, parameter, parameter) MUST_SUCCEED_POOL_EMPTY
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates there is no more must-succeed pool.
停止錯誤編號： 0x00000042 (parameter, parameter, parameter, parameter) ATDISK_DRIVER_INTERNAL
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a hard disk device driver internal
error.
停止錯誤編號： 0x00000043 (parameter, parameter, parameter, parameter) NO_SUCH_PARTITION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a disk device driver called the I/O
system to change a partition type on a specified partition, but the partition does not exist.
停止錯誤編號： 0x00000044 (parameter, parameter, parameter, parameter)
MULTIPLE_IRP_COMPLETE_REQUESTS
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to complete an
IRP (I/O request packet) more than once, possibly by more than one driver.
停止錯誤編號： 0x00000045 (parameter, parameter, parameter, parameter)
INSUFFICIENT_SYSTEM_MAP_REGS
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that an attempt was made to allocate
more map registers than are allocated to an adapter.
停止錯誤編號： 0x00000046 (parameter, parameter, parameter, parameter)
DEREF_UNKNOWN_LOGON_SESSION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a token was deleted that was not
part of any known logon session.
停止錯誤編號： 0x00000047 (parameter, parameter, parameter, parameter)
REF_UNKNOWN_LOGON_SESSION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a token was created that was not
part of any known logon session.
停止錯誤編號： 0x00000048 (parameter, parameter, parameter, parameter)
CANCEL_STATE_IN_COMPLETED_IRP
解釋：
This is a Windows 2000 Executive character-mode STOP message. Indicates that an attempt was made to cancel an
IRP (I/O request packet), but the packet had already been completed so it was not possible to cancel it. There might
be a problem with the driver. Or, although unlikely, more than one driver might be accessing the same packet.
停止錯誤編號： 0x00000049 (parameter, parameter, parameter, parameter)
PAGE_FAULT_WITH_INTERRUPTS_OFF
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a page fault occurred while
interrupts were disabled.
停止錯誤編號： 0x0000004A (parameter, parameter, parameter, parameter)
IRQL_GT_ZERO_AT_SYSTEM_SERVICE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt to exit from a system
service with an IRQL (interrupt request level) greater than 0.
停止錯誤編號： 0x0000004B (parameter, parameter, parameter, parameter) STREAMS_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates an internal error in the Streams
environment or in a Streams driver.
停止錯誤編號： 0x0000004C (parameter, parameter, parameter, parameter)
FATAL_UNHANDLED_HARD_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. This indicates a fatal hard error (STATUS
error) occurred before the hard error handler was available. There are several reasons why this error might occur: a
Registry hive file could not be loaded because it is either corrupted or missing; Winlogon or Windows
unexpectedly did not start; or a driver or system DLL is corrupted.
停止錯誤編號： 0x0000004D (parameter, parameter, parameter, parameter) NO_PAGES_AVAILABLE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that there are no physical pages
available.
停止錯誤編號： 0x0000004E (parameter, parameter, parameter, parameter) PFN_LIST_CORRUPT
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the memory management page file
number (PFN) list is corrupted.
停止錯誤編號： 0x0000004F (parameter, parameter, parameter, parameter) NDIS_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in the NDIS
wrapper or an NDIS driver.
停止錯誤編號： 0x00000050 (parameter, parameter, parameter, parameter)
PAGE_FAULT_IN_NONPAGED_AREA
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a page fault in the address space
reserved for nonpaged data.
停止錯誤編號： 0x00000051 (parameter, parameter, parameter, parameter) REGISTRY_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a Registry or configuration
manager problem. An I/O error might have occurred while the Registry was trying to read one of its files. This
could be caused by hardware or file system problems. This message might also appear because of a failure in a
refresh operation, which occurs when resource limits are encountered.
停止錯誤編號： 0x00000052 (parameter, parameter, parameter, parameter) MAILSLOT_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a mailslot file system problem.
停止錯誤編號： 0x00000053 (parameter, parameter, parameter, parameter) NO_BOOT_DEVICE
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that no boot driver was successfully
initialized.
停止錯誤編號： 0x00000054 (parameter, parameter, parameter, parameter)
LM_SERVER_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an internal error in the Windows
2000 Server.
停止錯誤編號： 0x00000055 (parameter, parameter, parameter, parameter)
DATA_COHERENCY_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary data caches.
停止錯誤編號： 0x00000056 (parameter, parameter, parameter, parameter)
INSTRUCTION_COHERENCY_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary instruction caches.
停止錯誤編號： 0x00000057 (parameter, parameter, parameter, parameter) XNS_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an XNS internal error. You might
need to replace your network card.
停止錯誤編號： 0x00000058 (parameter, parameter, parameter, parameter) FTDISK_INTERNAL_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary data caches. This is a fault-tolerant disk driver internal error.
停止錯誤編號： 0x00000059 (parameter, parameter, parameter, parameter) PINBALL_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an inconsistency between pages in
the primary and secondary data caches. This is an HPFS problem.
停止錯誤編號： 0x0000005A (parameter, parameter, parameter, parameter) CRITICAL_SERVICE_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a critical service failed to
initialize while starting the LastKnownGood control set.
停止錯誤編號： 0x0000005B (parameter, parameter, parameter, parameter) SET_ENV_VAR_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a critical service failed to initialize,
but the LastKnownGood environment variable could not be set.
停止錯誤編號： 0x0000005C (parameter, parameter, parameter, parameter) HAL_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 initialization of the Hardware
Abstraction Layer (HAL) failed. This can only happen during the relatively short period of time that the Windows
2000 Executive is being initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x0000005D (parameter, parameter, parameter, parameter) UNSUPPORTED_PROCESSOR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that there is a processor present that
is not supported.
停止錯誤編號： 0x0000005E (parameter, parameter, parameter, parameter)
OBJECT_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 initialization of the object manager
failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being
initialized, during phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x0000005F (parameter, parameter, parameter, parameter)
SECURITY_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 security initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x00000060 (parameter, parameter, parameter, parameter)
PROCESS_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 0 process initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. This might be a hardware problem.
停止錯誤編號： 0x00000061 (parameter, parameter, parameter, parameter) HAL1_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 initialization of the Hardware
Abstraction Layer (HAL) failed. This can only happen during the relatively short period of time that the Windows
2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a
device driver.
停止錯誤編號： 0x00000062 (parameter, parameter, parameter, parameter) OBJECT1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 initialization of the object manager
failed. This can only happen during the relatively short period of time that the Windows 2000 Executive is being
initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000063 (parameter, parameter, parameter, parameter) SECURITY1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 security initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000064 (parameter, parameter, parameter, parameter)
SYMBOLIC_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Symbolic link initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000065 (parameter, parameter, parameter, parameter) MEMORY1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 memory initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000066 (parameter, parameter, parameter, parameter)
CACHE_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. 快取 initialization failed. This can only happen
during the relatively short period of time that the Windows 2000 Executive is being initialized, during phase 4 of
Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000067 (parameter, parameter, parameter, parameter)
CONFIG_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Configuration initialization failed because the
Registry could not allocate the pool needed to contain the Registry files. This can only happen during the relatively
short period of time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000
startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000068 (parameter, parameter, parameter, parameter) FILE_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. File system initialization failed. This can only
happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000069 (parameter, parameter, parameter, parameter) IO1_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 I/O initialization failed. This can only
happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x0000006A (parameter, parameter, parameter, parameter) LPC_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Local procedure call (LPC) initialization failed.
This can only happen during the relatively short period of time that the Windows 2000 Executive is being
initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x0000006B (parameter, parameter, parameter, parameter) PROCESS1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Phase 1 process initialization failed. This can
only happen during the relatively short period of time that the Windows 2000 Executive is being initialized, during
phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x0000006C (parameter, parameter, parameter, parameter)
REFMON_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Reference monitor initialization failed. This can
only happen during the relatively short period of time that Windows 2000 Executive is being initialized. There
might be a problem with a device driver.
停止錯誤編號： 0x0000006D (parameter, parameter, parameter, parameter) SESSION1
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Session manager virtual memory allocation
parameters failed during session manager initialization. This can only happen during the relatively short period of
time that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might
be a problem with a device driver.
停止錯誤編號： 0x0000006E (parameter, parameter, parameter, parameter) SESSION2
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. The session manager virtual memory
environment failed to initialize. This can only happen during the relatively short period of time that the Windows
2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a
device driver.
停止錯誤編號： 0x0000006F (parameter, parameter, parameter, parameter) SESSION3
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. Session manager process creation failed. This
can only happen during the relatively short period of time that the Windows 2000 Executive is being initialized,
during phase 4 of Windows 2000 startup. There might be a problem with a device driver.
停止錯誤編號： 0x00000070 (parameter, parameter, parameter, parameter) SESSION4
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. During session manager initialization, a resume
thread operation failed. This can only happen during the relatively short period of time that the Windows 2000
Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a problem with a device
driver.
停止錯誤編號： 0x00000071 (parameter, parameter, parameter, parameter) SESSION5
_INITIALIZATION_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. During phase 1 initialization of the Windows
2000 Executive, the session manager terminated. This can only happen during the relatively short period of time
that the Windows 2000 Executive is being initialized, during phase 4 of Windows 2000 startup. There might be a
problem with a device driver.
停止錯誤編號： 0x00000072 (parameter, parameter, parameter, parameter)
ASSIGN_DRIVE_LETTERS_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a drive letter assignment failed.
停止錯誤編號： 0x00000073 (parameter, parameter, parameter, parameter) CONFIG_LIST_FAILED
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration link list
failed. One of the core system hives is corrupted or unreadable, or some critical Registry keys and values are not
present.
停止錯誤編號： 0x00000074 (parameter, parameter, parameter, parameter) BAD_SYSTEM_CONFIG_INFO
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration
information is corrupted.
停止錯誤編號： 0x00000075 (parameter, parameter, parameter, parameter)
CANNOT_WRITE_CONFIGURATION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates the system configuration
information cannot be written. The system hive files cannot be expanded to accommodate new data written to it
between Registry initialization and phase 1 initialization. There might be no free space on the drive.
停止錯誤編號： 0x00000076 (parameter, parameter, parameter, parameter) PROCESS_HAS_LOCKED_PAGES
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a process terminated with pages
locked for I/O.
停止錯誤編號： 0x00000077 (parameter, parameter, parameter, parameter)
KERNEL_STACK_INPAGE_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an I/O error during a kernel stack
paging operation. The requested page of kernel data could not be read in. This is caused by a bad block in the
paging file or by a disk controller error. If the error was caused by a bad block, when your system is restarted,
Autocheck will run and attempt to find the bad sector.
停止錯誤編號： 0x00000078 (parameter, parameter, parameter, parameter) PHASE0_EXCEPTION
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an exception during phase 0 of the
Windows 2000 Executive initialization.
停止錯誤編號： 0x00000079 (parameter, parameter, parameter, parameter) Mismatched kernel and hal image.
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a mismatched kernel and Hardware
Abstraction Layer (HAL) image.
停止錯誤編號： 0x0000007A (parameter, parameter, parameter, parameter)
KERNEL_DATA_INPAGE_ERROR
解釋：
This is a Windows 2000 Executive character-mode STOP message.
停止錯誤編號： 0x0000007B (parameter, parameter, parameter, parameter) INACCESSIBLE_BOOT_DEVICE
解釋：
This is a Windows 2000 Executive character-mode STOP message. During I/O system initialization, the driver for
the boot device might have failed to initialize the device the system is attempting to start from. It is also possible
that the file system failed to initialize because it did not recognize the data on the boot device. If this error occurs
during initial system setup, the system might have been installed on an unsupported disk or SCSI controller. Also,
this error might occur because of the installation of a new SCSI adapter or disk controller or if the disk was
repartitioned with the system partition.
停止錯誤編號： 0x0000007D (parameter, parameter, parameter, parameter) INSTALL_MORE_MEMORY
解釋：
This is a Windows 2000 Executive character-mode STOP message. Windows 2000 requires at least 5 MB of
memory to start.
停止錯誤編號： 0x0000007F (parameter, parameter, parameter, parameter)
UNEXPECTED_KERNEL_MODE_TRAP
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates that a trap occurred in kernel mode.
停止錯誤編號： 0x00000081 (parameter, parameter, parameter, parameter) SPIN_LOCK_INIT_FAILURE
解釋：
This is a Windows 2000 Executive character-mode STOP message.
停止錯誤編號： 0x00000082 (parameter, parameter, parameter, parameter) DFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a Distributed file system (Dfs)
problem.
停止錯誤編號： 0x00000083 (parameter, parameter, parameter, parameter) OFS_FILE_SYSTEM
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates an OFS file system problem.
停止錯誤編號： 0x00000084 (parameter, parameter, parameter, parameter) RECOM_DRIVER
解釋：
This is a Windows 2000 Executive character-mode STOP message. It indicates a RECOM driver problem.
停止錯誤編號： 0x00000085 (parameter, parameter, parameter, parameter) SETUP_FAILURE
扫一扫
979
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
