curl分析http请求各阶段耗时情况

curl的w参数说明
url_effective 最终获取的url地址，尤其是当你指定给curl的地址存在301跳转，且通过-L继续追踪的情形。
http_code http状态码，如200成功,301转向,404未找到,500服务器错误等。(The numerical response code that was found in the last retrieved HTTP(S) or FTP(s) transfer. In 7.18.2 the alias response_code was added to show the same info.)
http_connect The numerical code that was found in the last response (from a proxy) to a curl CONNECT request. (Added in 7.12.4)
time_total 总时间，按秒计。精确到小数点后三位。 （The total time, in seconds, that the full operation lasted. The time will be displayed with millisecond resolution.）
time_namelookup DNS解析时间,从请求开始到DNS解析完毕所用时间。(The time, in seconds, it took from the start until the name resolving was completed.)
time_connect 连接时间,从开始到建立TCP连接完成所用时间,包括前边DNS解析时间，如果需要单纯的得到连接时间，用这个time_connect时间减去前边time_namelookup时间。以下同理，不再赘述。(The time, in seconds, it took from the start until the TCP connect to the remote host (or proxy) was completed.)
time_appconnect 连接建立完成时间，如SSL/SSH等建立连接或者完成三次握手时间。(The time, in seconds, it took from the start until the SSL/SSH/etc connect/handshake to the remote host was completed. (Added in 7.19.0))
time_pretransfer 从开始到准备传输的时间。(The time, in seconds, it took from the start until the file transfer was just about to begin. This includes all pre-transfer commands and negotiations that are specific to the particular protocol(s) involved.)
time_redirect 重定向时间，包括到最后一次传输前的几次重定向的DNS解析，连接，预传输，传输时间。(The time, in seconds, it took for all redirection steps include name lookup, connect, pretransfer and transfer before the final transaction was started. time_redirect shows the complete execution time for multiple redirections. (Added in 7.12.3))
time_starttransfer 开始传输时间。在发出请求之后，Web 服务器返回数据的第一个字节所用的时间(The time, in seconds, it took from the start until the first byte was just about to be transferred. This includes time_pretransfer and also the time the server needed to calculate the result.)
size_download 下载大小。(The total amount of bytes that were downloaded.)
size_upload 上传大小。(The total amount of bytes that were uploaded.)
size_header 下载的header的大小(The total amount of bytes of the downloaded headers.)
size_request 请求的大小。(The total amount of bytes that were sent in the HTTP request.)
speed_download 下载速度，单位-字节每秒。(The average download speed that curl measured for the complete download. Bytes per second.)
speed_upload 上传速度,单位-字节每秒。(The average upload speed that curl measured for the complete upload. Bytes per second.)
content_type 就是content-Type，不用多说了，这是一个访问我博客首页返回的结果示例(text/html; charset=UTF-8)；(The Content-Type of the requested document, if there was any.)
num_connects 最近的的一次传输中创建的连接数目。Number of new connects made in the recent transfer. (Added in 7.12.3)
num_redirects 在请求中跳转的次数。Number of redirects that were followed in the request. (Added in 7.12.3)
redirect_url When a HTTP request was made without -L to follow redirects, this variable will show the actual URL a redirect would take you to. (Added in 7.18.2)
ftp_entry_path 当连接到远程的ftp服务器时的初始路径。The initial path libcurl ended up in when logging on to the remote FTP server. (Added in 7.15.4)
ssl_verify_result ssl认证结果，返回0表示认证成功。( The result of the SSL peer certificate verification that was requested. 0 means the verification was successful. (Added in 7.19.0))

模板文件
[root@k8smaster01 ~]# cat template.txt 
\n----------------------------------------------------\n
       url_effective: %{url_effective} \n
           http_code: %{http_code} \n
        http_connect: %{http_connect} \n
       size_download: %{size_download} bytes \n
         size_upload: %{size_upload} bytes \n
         size_header: %{size_header} bytes \n
        size_request: %{size_request} bytes \n
      speed_download: %{speed_download} bytes/s \n
        speed_upload: %{speed_upload} bytes/s \n
        content_type: %{content_type} \n
        num_connects: %{num_connects} \n
       num_redirects: %{num_redirects} \n
        redirect_url: %{redirect_url} \n
      ftp_entry_path: %{ftp_entry_path} \n
   ssl_verify_result: %{ssl_verify_result} \n
        time_connect: %{time_connect} s \n
     time_appconnect: %{time_appconnect} s \n
    time_pretransfer: %{time_pretransfer} s \n
       time_redirect: %{time_redirect} s \n
  time_starttransfer: %{time_starttransfer} s \n
                 dns: %{time_namelookup} s \n
------------------------------------------------------\n
          time_total: %{time_total} s \n
[root@k8smaster01 ~]#

案例使用：
[root@k8smaster01 ~]# curl -w "@template.txt" http://192.168.23.1:8080/demo/wx/address/list