STM32F4时钟树

zhangevolxuan

已于 2022-07-10 09:17:56 修改

阅读量256

点赞数

分类专栏： STM32学习之路文章标签： stm32 单片机 arm

于 2022-07-04 21:39:41 首次发布

本文链接：https://blog.csdn.net/zhangevol19920210/article/details/125608872

版权

STM32学习之路专栏收录该内容

3 篇文章 1 订阅

订阅专栏

功能快捷键

撤销：Ctrl/Command + Z
重做：Ctrl/Command + Y
加粗：Ctrl/Command + B
斜体：Ctrl/Command + I
标题：Ctrl/Command + Shift + H
无序列表：Ctrl/Command + Shift + U
有序列表：Ctrl/Command + Shift + O
检查列表：Ctrl/Command + Shift + C
插入代码：Ctrl/Command + Shift + K
插入链接：Ctrl/Command + Shift + L
插入图片：Ctrl/Command + Shift + G
查找：Ctrl/Command + F
替换：Ctrl/Command + G

STM32F4

int main(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
 
 /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       files before to branch to application main.
       To reconfigure the default setting of SystemInit() function, 
       refer to system_stm32f4xx.c file */

  /* SysTick end of count event each 10ms */
  RCC_GetClocksFreq(&RCC_Clocks);
  SysTick_Config(RCC_Clocks.HCLK_Frequency / 100);
  
  /* Add your application code here */
  /* Insert 50 ms delay */
  Delay(5);
  
  /* Output HSE clock on MCO1 pin(PA8) ****************************************/ 
  /* Enable the GPIOA peripheral */ 
  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
  
  /* Configure MCO1 pin(PA8) in alternate function */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;  
  GPIO_Init(GPIOA, &GPIO_InitStructure);
    
  /* HSE clock selected to output on MCO1 pin(PA8)*/
  RCC_MCO1Config(RCC_MCO1Source_HSE, RCC_MCO1Div_1);
  
  
  /* Output SYSCLK/4 clock on MCO2 pin(PC9) ***********************************/ 
  /* Enable the GPIOACperipheral */ 
  RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);
  
  /* Configure MCO2 pin(PC9) in alternate function */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;  
  GPIO_Init(GPIOC, &GPIO_InitStructure);
    
  /* SYSCLK/4 clock selected to output on MCO2 pin(PC9)*/
  RCC_MCO2Config(RCC_MCO2Source_SYSCLK, RCC_MCO2Div_4);
  
     
  /* Infinite loop */
  while (1)
  {
  }
}

合理的创建标题，有助于目录的生成

时钟树如下

##2级目录

如何改变文本的样式

强调文本 强调文本

加粗文本 加粗文本

如何插入一段漂亮的代码片

/* Includes ------------------------------------------------------------------*/
#include “main.h”

/** @addtogroup Template_Project

@{
*/

/* Private typedef -----------------------------------------------------------/
/ Private define ------------------------------------------------------------/
/ Private macro -------------------------------------------------------------/
/ Private variables ---------------------------------------------------------*/
static __IO uint32_t uwTimingDelay;
RCC_ClocksTypeDef RCC_Clocks;

/* Private function prototypes -----------------------------------------------*/
static void Delay(__IO uint32_t nTime);

/* Private functions ---------------------------------------------------------*/

/**

@brief Main program
@param None
@retval None
*/
int main(void)
{
GPIO_InitTypeDef GPIO_InitStructure;

/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
files before to branch to application main.
To reconfigure the default setting of SystemInit() function,
refer to system_stm32f4xx.c file */

/* SysTick end of count event each 10ms */
RCC_GetClocksFreq(&RCC_Clocks);
SysTick_Config(RCC_Clocks.HCLK_Frequency / 100);

/* Add your application code here /
/ Insert 50 ms delay */
Delay(5);

/* Output HSE clock on MCO1 pin(PA8) ***************************************/
/ Enable the GPIOA peripheral */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);

/* Configure MCO1 pin(PA8) in alternate function */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStructure);

/* HSE clock selected to output on MCO1 pin(PA8)*/
RCC_MCO1Config(RCC_MCO1Source_HSE, RCC_MCO1Div_1);

/* Output SYSCLK/4 clock on MCO2 pin(PC9) **********************************/
/ Enable the GPIOACperipheral */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);

/* Configure MCO2 pin(PC9) in alternate function */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOC, &GPIO_InitStructure);

/* SYSCLK/4 clock selected to output on MCO2 pin(PC9)*/
RCC_MCO2Config(RCC_MCO2Source_SYSCLK, RCC_MCO2Div_4);

/* Infinite loop */
while (1)
{
}
}

/**

@brief Inserts a delay time.
@param nTime: specifies the delay time length, in milliseconds.
@retval None
*/
void Delay(__IO uint32_t nTime)
{
uwTimingDelay = nTime;

while(uwTimingDelay != 0);
}

/**

@brief Decrements the TimingDelay variable.
@param None
@retval None
*/
void TimingDelay_Decrement(void)
{
if (uwTimingDelay != 0x00)
{
uwTimingDelay–;
}
}

#ifdef USE_FULL_ASSERT

/**

@brief Reports the name of the source file and the source line number

    where the assert_param error has occurred.

@param file: pointer to the source file name
@param line: assert_param error line source number
@retval None
/
void assert_failed(uint8_t file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf(“Wrong parameters value: file %s on line %d\r\n”, file, line) */

/* Infinite loop */
while (1)
{
}
}
#endif

/**

@}
*/

/************************ © COPYRIGHT STMicroelectronics *END OF FILE/

生成一个适合你的列表

项目
- 项目
  - 项目

项目1
项目2
项目3

计划任务
完成任务

创建一个表格

一个简单的表格是这么创建的：

项目	Value
电脑	$1600
手机	$12
导管	$1

设定内容居中、居左、居右

使用:---------:居中
使用:----------居左
使用----------:居右

第一列	第二列	第三列
第一列文本居中	第二列文本居右	第三列文本居左

SmartyPants

SmartyPants将ASCII标点字符转换为“智能”印刷标点HTML实体。例如：

TYPE	ASCII	HTML
Single backticks	`'Isn't this fun?'`	‘Isn’t this fun?’
Quotes	`"Isn't this fun?"`	“Isn’t this fun?”
Dashes	`-- is en-dash, --- is em-dash`	– is en-dash, — is em-dash