DM365 linux内核&文件系统的烧写步骤及其uboot参数配置

DM365/DM368 专栏收录该内容
39 篇文章 1 订阅

DM365 linux内核&文件系统的烧写步骤及其uboot参数配置

 

 

目录

源文档下载:http://download.csdn.net/detail/zhangjikuan/6443961

第一节:uboot下载

第二节:启动uboot

第三节:修改uboot参数

第四节:ping通

第五节:下载内核uImage

第六节:挂载文件系统yaffs2

第七节:拷贝文件系统到nandflash

第八节:设置nandflash启动文件系统

附件一:uImage启动时打印内容

附件二:挂载文件系统后多打印的内容

附件三:从flash启动文件系统时打印内容

 

 

 

 

 

 

 

第一节:uboot下载

我是时用的CCS3.3和SEED-XDS560PLUS仿真器下载的UBOOT到DM365的FLASH。详细请参照“CCS3.3下载UBOOT到NANDFLASH步骤”http://download.csdn.net/detail/zhangjikuan/6424595

 

第二节:启动uboot

连接好PC--串口--板子,并上电。打开secureCRT设置好串口参数,按板子复位键,此时UBOOT启动如下所示

 


第三节:修改uboot参数

1.输入printenv查看UBOOT参数设置

 2.输入setenv ipaddr 172.18.168.223  (板子的IP)

 3.输入setenv serverip 172.18.168.63 (虚拟机的IP(ifconfig查看))

 4.输入setenv ethaddr 00:00:12:34:56:78(随意设定,格式要正确)

 5.输入setenv bootargs ‘console=ttyS0,115200n8 noinitrd rw,nolock mem=80M’

 6.输入setenvbootcmd ‘setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip) eth=$(ethaddr); nboot0x80800000 0 0x400000;bootm 0x80800000’

7.输入saveenv  (将环境变量写到flash不写的话复位后修改的数据就丢失了)

其他的基本不需要修改,修改后如下输入printenv所示

 

第四节:ping通

1.连接好网线,打开虚拟机 (复位板子,不然ping不通

2.输入ping 172.18.168.63(虚拟机的IP,要关闭虚拟机的防火墙,虚拟中输入setup 修改)

Ping通了串口输出host172.18.168.63 is alive 

Ping通了就可以通过tftp下载内核了

 

第五节:下载内核uImage

1.虚拟机中将制作好的内核uImage从/home/workdir/dm365/linux-2.6.18_pro500/arch/boot中拷贝到/tftpboot中

2.串口终端下输入tftp 0x80800000 uImage   (将uImage从虚拟机中下载到内存RAM的0x80800000开始地址处)

下载过程如下所示

 

 

 


此时内核已经下载到RAM的0x80800000其实地址处了

3.串口终端输入 nand erase 400000 200000 (擦出nandflash 0x400000起始地址0x200000大小的区域)

4.串口终端输入 nand write 80800000 400000 200000(将RAM的起始地址0x80800000 大小0x200000的内容写到nand的0x400000起始地址处)

成功写入如下所示

 

 

 


5.此时按下复位键打印内容见附件一

 

 

第六节:挂载文件系统yaffs2

   说明:内核的加载是通过tftp的方式下载的,此种方式需要

内核制作成特殊格式的文件才能被识别下载,文件系统是通过

NFS的形式先挂载到虚拟机中制作好的文件系统中,再通过命

令将文件系统复制到nandflash中

需要用到NFS所以需要重新修改UBOOT参数

 

1.按下复位键 按回车阻止板子内核的启动

2.输入setenv bootcmd ‘setenvbootargs $(bootargs) root=$(rootfs) rootfstype=$(rootpe) ip=$(ipaddr):$(serverip)eth=$(ethaddr) nfsroot=$(serverip):$(nfsworkdir) ;nboot 0x80800000 00x400000;bootm 0x80700000’

 

Setenv rootfs /dev/nfs (因为文件系统是挂载的,所以改成nfs)

Setenv rootpe ‘yaffs2 rw’ (rootpe是自己设的参数,不是系统参数)

Setenv workdir /home/workdir/dm365/rootfilesys  (确保在虚拟机此目录下有做好的yafs2的文件系统)

输入 saveenv

4.输入printenv如下所示

 

 


5.插好网线按下复位键 比内核启动时多打印了内容见附件二

 

6.输入root打印如下内容

 

Last login: Thu Jan  1 00:01:43 1970 on console

Linux 172.18.168.223 2.6.18_pro500-davinci_evm-arm_v5t_le#1 PREEMPT Tue Mar 9 15:49:57 CST 2010 armv5tejl GNU/Linux

root@172.18.168.223:~#

 

下面就可以跟虚拟机一样输入命令了

注意:此文件系统是挂载的虚拟机的,不是板子真正运行的

nandflash里的文件系统

 

第七节:拷贝文件系统到nandflash

1.终端输入 cd /toflash

2.    输入 mount/dev/mtdblock4 /mnt/flash 

此时可能会出现很多的partially written block xxxx set for retirement

不用管,一直等着结束出现root@172.18.168.223:~#

3.输入ls /mnt/flash  查看是否已经挂载/dev/mtdblock4

4.输入 cp –rf * /mnt/flash

   此时也可能会出现很多的东西,不用管等待结束

5.输入 ls /mnt/flash 查看是否已经复制好

第八节:设置nandflash启动文件系统

修改UOOT参数使板子可以启动nandflash中的文件系统,修改好后就不需要使用网线挂载虚拟机中的文件系统

1.修改UBOOT参数

  输入setenvrootfs  /dev/mtdblock4(挂载的和nand启动的参数区别就是此参数的不同)

  输入saveenv

2.复位重启板子

 打印内容见附件三

 

 

 

至此大功告成

江南大学物联网学院C426实验室

2013.10.20



附件一:uImage启动时打印内容

U-Boot 1.3.4(Feb  2 2010 - 14:45:12)

 

start 8

I2C:   ready

start 9

start 10

DRAM:  128 MB

start 11

NAND:  fujun CONFIG_CMD_NAND before nand_init

inter nand_initinternand_init_chipNAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND512MiB 3,3V 8-bit)

nand_default_bbt

len1024

search_read_bbts

Bad block table found at page262080, version 0x01

Bad block table found at page262016, version 0x01

read_bbt

inter nand_init_chipNANDdevice: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)

nand_default_bbt

len1024

search_read_bbts

Bad block table found at page262080, version 0x01

Bad block table found at page262016, version 0x01

read_bbt

1024 MiB

end nand_init

In:    serial

Out:   serial

Err:   serial

------------TechShineDM365-------------

 

EEPROM @ 0x50 read FAILED!!!

Ethernet PHY: GENERIC @ 0x00

Hit any key to stopautoboot:  0

 

Loading from NAND 512MiB 3,3V8-bit, offset 0x400000

   Image Name:  Linux-2.6.18_pro500-davinci_evm-

   Image Type:  ARM Linux Kernel Image (uncompressed)

   Data Size:   2060876 Bytes =  2 MB

   Load Address: 80008000

   Entry Point: 80008000

## Booting kernel from LegacyImage at 80800000 ...

   Image Name:  Linux-2.6.18_pro500-davinci_evm-

   Image Type:  ARM Linux Kernel Image (uncompressed)

   Data Size:   2060876 Bytes =  2 MB

   Load Address: 80008000

   Entry Point: 80008000

   Verifying Checksum ... OK

   Loading Kernel Image ... OK

OK

 

Starting kernel ...

 

UncompressingLinux.........................................................................................................................................done, booting the kernel.

Linux version 2.6.18_pro500-davinci_evm-arm_v5t_le(root@localhost.localdomain) (gcc 鐗堟湰 4.2.0 (MontaVista4.2.0-16.0.32.0801914 2008-08-30)) #1PREEMPT Tue Mar 9 15:49:57 CST 2010

CPU: ARM926EJ-S [41069265]revision 5 (ARMv5TEJ), cr=00053177

Machine: DaVinci DM365 EVM

Memory policy: ECC disabled,Data cache writeback

BUG: mapping for 0x04008000at 0xf2000000 overlaps vmalloc space

DaVinci DM0365 variant 0x8

PLL0: fixedrate: 24000000,commonrate: 121500000, vpssrate: 243000000

PLL0: vencrate_sd: 27000000,ddrrate: 243000000 mmcsdrate: 121500000

PLL1: armrate: 297000000,voicerate: 99000000, vencrate_hd: 74250000

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes,associativity 4, 32 byte lines, 128 sets

CPU0: D cache: 8192 bytes,associativity 4, 32 byte lines, 64 sets

Built 1 zonelists.  Total pages: 20480

Kernel command line:console=ttyS0,115200n8 noinitrd rw ,nolock mem=80Mip=172.18.168.223:172.18.168.63 eth=00:00:12:34:56:78

TI DaVinci EMAC: kernel bootparams Ethernet address: 00:00:12:34:56:78

PID hash table entries: 512(order: 9, 2048 bytes)

Clock event device timer0_0configured with caps set: 07

Console: colour dummy device80x30

Dentry cache hash tableentries: 16384 (order: 4, 65536 bytes)

Inode-cache hash tableentries: 8192 (order: 3, 32768 bytes)

Memory: 80MB = 80MB total

Memory: 76672KB available(3541K code, 712K data, 200K init)

Security Framework v1.0.0initialized

Capability LSM initialized

Mount-cache hash tableentries: 512

CPU: Testing write buffercoherency: ok

NET: Registered protocolfamily 16

MUX: initialized SPI0_SCLK

MUX: initialized SPI0_SDO)

MUX: initialized SPI0_SDI

MUX: initialized SPI0_SDENA0

DaVinci: 104 gpio irqs

MUX: initialized GPIO20

MUX: initialized I2C_SCL

DM365 IPIPE initialized inSingle Shot mode

Generic PHY: Registered newdriver

ch0 default output"COMPOSITE", mode "NTSC"

VPBE Encoder Initialized

LogicPD encoder initialized

Avnetlcd encoder initialized

dm365_afew_hw_init

SCSI subsystem initialized

usbcore: registered newdriver usbfs

usbcore: registered newdriver hub

NET: Registered protocolfamily 2

IP route cache hash tableentries: 1024 (order: 0, 4096 bytes)

TCP established hash tableentries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries:2048 (order: 1, 8192 bytes)

TCP: Hash tables configured(established 4096 bind 2048)

TCP reno registered

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash tableentries: 1024 (order 0, 4096 bytes)

squashfs: version 3.1 (2006/08/19)Phillip Lougher

JFFS2 version 2.2. (NAND) (C)2001-2006 Red Hat, Inc.

yaffs Mar  9 2010 16:02:25 Installing.

SGI XFS with no debug enabled

Initializing CryptographicAPI

io scheduler noop registered

io scheduler anticipatoryregistered (default)

Console: switching to colourframe buffer device 90x60

davincifb davincifb.0:dm_osd0_fb: 720x480x16@0,0 with framebuffer size 675KB

davincifb davincifb.0:dm_vid0_fb: 0x0x16@0,0 with framebuffer size 1020KB

davincifb davincifb.0:dm_osd1_fb: 720x480x4@0,0 with framebuffer size 675KB

davincifb davincifb.0:dm_vid1_fb: 0x0x16@0,0 with framebuffer size 1020KB

DAVINCI-WDT: DaVinci WatchdogTimer: heartbeat 60 sec

facedetect major#: 253,minor# 0

facedetect driver registered

imp serializer initialized

davinci_previewer initialized

davinci_resizer initialized

Serial: 8250/16550 driver$Revision: 1.90 $ 2 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIOmap 0x1c20000 mem 0xfbc20000 (irq = 40) is a 16550A

serial8250.0: ttyS1 at MMIOmap 0x1d06000 mem 0xfbd06000 (irq = 41) is a 16550A

RAMDISK driver initialized: 1RAM disks of 32768K size 1024 blocksize

Davinci EMAC MII Bus: probed

MAC address is00:00:12:34:56:78

TI DaVinci EMAC Linux versionupdated 4.0

netconsole: not configured,aborting

Linux video captureinterface: v2.00

vpfe_init

starting ccdc_reset...<7>

End ofccdc_reset...<5>vpfe_probe

TVP514X : nummber of channels= 1

vpfe ccdc capture vpfe ccdccapture.1: vpif_register_decoder: decoder = TVP514X

Trying to register davincidisplay video device.

layer=c06eb400,layer->video_dev=c06eb560

Trying to register davincidisplay video device.

layer=c06eb200,layer->video_dev=c06eb360

davinci_init:DaVinci V4L2Display Driver V1.0 loaded

af major#: 250, minor# 0

AF Driver initialized

aew major#: 249, minor# 0

AEW Driver initialized

i2c /dev entries driver

nand_davinci nand_davinci.0:Using 4-bit hardware ECC

NAND device: Manufacturer ID:0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)

2 NAND chips detected

Bad block table not found forchip 0

Bad block table not found forchip 1

Bad block table not found forchip 0

Bad block table not found forchip 1

Scanning device for badblocks

Scanning device for badblocks

Creating 5 MTD partitions on"nand_davinci.0":

0x00000000-0x003c0000 :"bootloader"

0x003c0000-0x00400000 :"params"

0x00400000-0x00800000 :"kernel"

0x00800000-0x20800000 :"filesystem1"

0x20800000-0x40000000 :"filesystem2"

nand_davinci nand_davinci.0:hardware revision: 2.3

Pin SPI0_SDO) already usedfor GPIO20.

dm_spi.0: davinci SPIController driver at 0xc581e000 (irq = 42) use_dma=0

Initializing USB Mass Storagedriver...

usbcore: registered newdriver usb-storage

USB Mass Storage supportregistered.

usbcore: registered newdriver usbhid

drivers/usb/input/hid-core.c:v2.6:USB HID core driver

musb_hdrc: version 6.0, pio,host, debug=0

MUX: initialized GPIO33

musb_hdrc: USB Host modecontroller at c5874000 using PIO, IRQ 12

musb_hdrc musb_hdrc: MUSBHDRC host driver

musb_hdrc musb_hdrc: new USBbus registered, assigned bus number 1

usb usb1: configuration #1chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

mice: PS/2 mouse devicecommon for all mice

davinci-mmc davinci-mmc.0:Supporting 4-bit mode

davinci-mmc davinci-mmc.0:Using DMA mode

Advanced Linux SoundArchitecture Driver Version 1.0.12rc1 (ThuJun 22 13:55:50 2006 UTC).

ASoC version 0.13.1

AIC3X Audio Codec 0.2

aic3x_codec_probe ok

asoc: aic3x <->davinci-i2s mapping ok

ALSA device list:

  #0: DaVinci DM365 EVM (aic3x)

IPv4 over IPv4 tunnelingdriver

TCP bic registered

NET: Registered protocolfamily 1

NET: Registered protocolfamily 17

drivers/rtc/hctosys.c: unableto open rtc device (rtc0)

Time: timer0_1 clocksourcehas been installed.

Clock event device timer0_0configured with caps set: 08

Switched to high resolutionmode on CPU 0

IP-Config: Guessing netmask255.255.0.0

IP-Config: Complete:

      device=eth0, addr=172.18.168.223,mask=255.255.0.0, gw=255.255.255.255,

     host=172.18.168.223, domain=,nis-domain=(none),

     bootserver=172.18.168.63,rootserver=172.18.168.63, rootpath=

Looking up port of RPC100003/2 on 172.18.168.63

portmap: server 172.18.168.63not responding, timed out

Root-NFS: Unable to get nfsdport number from server, using default

Looking up port of RPC100005/1 on 172.18.168.63

portmap: server 172.18.168.63not responding, timed out

Root-NFS: Unable to getmountd port number from server, using default        

mount: server 172.18.168.63not responding, timed out

Root-NFS: Server returnederror -5 while mounting /tftpboot/172.18.168.223

VFS: Unable to mount root fsvia NFS, trying floppy.

VFS: Cannot open root device"<NULL>" or unknown-block(2,0)

Please append a correct"root=" boot option

Kernel panic - not syncing:VFS: Unable to mount root fs on unknown-block(2,0)


附件二:挂载文件系统后多打印的内容

Looking up port of RPC100003/2 on 172.18.168.63

portmap: server 172.18.168.63not responding, timed out

Root-NFS: Unable to get nfsdport number from server, using default

Looking up port of RPC100005/1 on 172.18.168.63

VFS: Mounted root (nfsfilesystem).

Freeing init memory: 200K

INIT: version 2.86 booting

Starting the hotplug eventsdispatcher: udevd.

Synthesizing the initialhotplug events...done.

Waiting for /dev to be fullypopulated...done.

Activating swap...done.

Remounting root filesystem...done.

Calculating moduledependencies

WARNING: Couldn't opendirectory /lib/modules/2.6.18_pro500-davinci_evm-arm_v5t_le:No such file or directory

FATAL: Could not open/lib/modules/2.6.18_pro500-davinci_evm-arm_v5t_le/modules.dep.tempfor writing: No such file or directory

Loading modules:

Checking all file systems:fsck

fsck 1.40 (29-Jun-2007)

Mounting local filesystems:mount nothing was mounted

umount.nfs: /dev/root: notfound or not mounted

Setting up networking ....

/etc/network/options isdeprecated.

Setting up IP spoofingprotection: rp_filter done.

Disabling IPv4 packetforwarding: done.

Disabling TCP/IP ExplicitCongestion Notification: done.

Starting network interfaces:done.

Starting hotplug subsystem:

   pci    

   pci     [success]

   usb    

   usb     [success]

   isapnp 

   isapnp  [success]

   ide    

   ide     [success]

   input  

   input   [success]

   scsi   

   scsi    [success]

done.

Starting portmap daemon....

Cleaning: /tmp /var/lock/var/run done.

Updating /etc/motd...done.

INIT: Entering runlevel: 3

Starting system log daemon:syslogd klogd.

Starting NFS commonutilities: statd.

Starting internetsuperserver: inetd.

Starting OpenBSD Secure Shellserver: sshd.

 

MontaVista(R) Linux(R)Professional Edition 5.0.0 (0801921)

 

172.18.168.223 login:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

附件三:从flash启动文件系统时打印内容

U-Boot 1.3.4(Feb  2 2010 - 14:45:12)

 

start 8

I2C:   ready

start 9

start 10

DRAM:  128 MB

start 11

NAND:  fujun CONFIG_CMD_NAND before nand_init

inter nand_initinter nand_init_chipNANDdevice: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)

nand_default_bbt

len1024

search_read_bbts

Bad block table not found forchip 0

Bad block table not found forchip 0

Bad block table written to0x1ffe0000, version 0x01

Bad block table written to0x1ffc0000, version 0x01

inter nand_init_chipNANDdevice: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)

nand_default_bbt

len1024

search_read_bbts

Bad block table found at page262080, version 0x01

Bad block table found at page262016, version 0x01

read_bbt

1024 MiB

end nand_init

In:    serial

Out:   serial

Err:   serial

------------TechShineDM365-------------

 

EEPROM @ 0x50 read FAILED!!!

Ethernet PHY: GENERIC @ 0x00

Hit any key to stopautoboot:  0

 

Loading from NAND 512MiB 3,3V8-bit, offset 0x400000

   Image Name:  Linux-2.6.18_pro500-davinci_evm-

   Image Type:  ARM Linux Kernel Image (uncompressed)

   Data Size:   2060876 Bytes =  2 MB

   Load Address: 80008000

   Entry Point: 80008000

## Booting kernel from LegacyImage at 80800000 ...

   Image Name:  Linux-2.6.18_pro500-davinci_evm-

   Image Type:  ARM Linux Kernel Image (uncompressed)

   Data Size:   2060876 Bytes =  2 MB

   Load Address: 80008000

   Entry Point: 80008000

   Verifying Checksum ... OK

   Loading Kernel Image ... OK

OK

 

Starting kernel ...

 

UncompressingLinux.........................................................................................................................................done, booting the kernel.

Linux version 2.6.18_pro500-davinci_evm-arm_v5t_le(root@localhost.localdomain) (gcc 鐗堟湰 4.2.0 (MontaVista4.2.0-16.0.32.0801914 2008-08-30)) #1 PREEMPTTue Mar 9 15:49:57 CST 2010

CPU: ARM926EJ-S [41069265]revision 5 (ARMv5TEJ), cr=00053177

Machine: DaVinci DM365 EVM

Memory policy: ECC disabled,Data cache writeback

BUG: mapping for 0x04008000at 0xf2000000 overlaps vmalloc space

DaVinci DM0365 variant 0x8

PLL0: fixedrate: 24000000,commonrate: 121500000, vpssrate: 243000000

PLL0: vencrate_sd: 27000000,ddrrate: 243000000 mmcsdrate: 121500000

PLL1: armrate: 297000000,voicerate: 99000000, vencrate_hd: 74250000

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes,associativity 4, 32 byte lines, 128 sets

CPU0: D cache: 8192 bytes,associativity 4, 32 byte lines, 64 sets

Built 1 zonelists.  Total pages: 20480

Kernel command line:console=ttyS0,115200n8 noinitrd rw ,nolock mem=80M root=/dev/mtdblock4rootfstype=yaffs2 rw ip=172.18.168.223:172.18.168.63 eth=00:0c:29:56:fb:44nfsroot=172.18.168.63:/home/workdir/dm365/rootfilesys

TI DaVinci EMAC: kernel bootparams Ethernet address: 00:0c:29:56:fb:44

PID hash table entries: 512(order: 9, 2048 bytes)

Clock event device timer0_0configured with caps set: 07

Console: colour dummy device80x30

Dentry cache hash tableentries: 16384 (order: 4, 65536 bytes)

Inode-cache hash tableentries: 8192 (order: 3, 32768 bytes)

Memory: 80MB = 80MB total

Memory: 76672KB available(3541K code, 712K data, 200K init)

Security Framework v1.0.0initialized

Capability LSM initialized

Mount-cache hash tableentries: 512

CPU: Testing write buffercoherency: ok

NET: Registered protocolfamily 16

MUX: initialized SPI0_SCLK

MUX: initialized SPI0_SDO)

MUX: initialized SPI0_SDI

MUX: initialized SPI0_SDENA0

DaVinci: 104 gpio irqs

MUX: initialized GPIO20

MUX: initialized I2C_SCL

DM365 IPIPE initialized inSingle Shot mode

Generic PHY: Registered newdriver

ch0 default output"COMPOSITE", mode "NTSC"

VPBE Encoder Initialized

LogicPD encoder initialized

Avnetlcd encoder initialized

dm365_afew_hw_init

SCSI subsystem initialized

usbcore: registered newdriver usbfs

usbcore: registered newdriver hub

NET: Registered protocolfamily 2

IP route cache hash tableentries: 1024 (order: 0, 4096 bytes)

TCP established hash tableentries: 4096 (order: 2, 16384 bytes)

TCP bind hash table entries:2048 (order: 1, 8192 bytes)

TCP: Hash tables configured(established 4096 bind 2048)

TCP reno registered

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash tableentries: 1024 (order 0, 4096 bytes)

squashfs: version 3.1 (2006/08/19)Phillip Lougher

JFFS2 version 2.2. (NAND) (C)2001-2006 Red Hat, Inc.

yaffs Mar  9 2010 16:02:25 Installing.

SGI XFS with no debug enabled

Initializing CryptographicAPI

io scheduler noop registered

io scheduler anticipatoryregistered (default)

Console: switching to colourframe buffer device 90x60

davincifb davincifb.0:dm_osd0_fb: 720x480x16@0,0 with framebuffer size 675KB

davincifb davincifb.0:dm_vid0_fb: 0x0x16@0,0 with framebuffer size 1020KB

davincifb davincifb.0:dm_osd1_fb: 720x480x4@0,0 with framebuffer size 675KB

davincifb davincifb.0:dm_vid1_fb: 0x0x16@0,0 with framebuffer size 1020KB

DAVINCI-WDT: DaVinci WatchdogTimer: heartbeat 60 sec

facedetect major#: 253,minor# 0

facedetect driver registered

imp serializer initialized

davinci_previewer initialized

davinci_resizer initialized

Serial: 8250/16550 driver$Revision: 1.90 $ 2 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIOmap 0x1c20000 mem 0xfbc20000 (irq = 40) is a 16550A

serial8250.0: ttyS1 at MMIOmap 0x1d06000 mem 0xfbd06000 (irq = 41) is a 16550A

RAMDISK driver initialized: 1RAM disks of 32768K size 1024 blocksize

Davinci EMAC MII Bus: probed

MAC address is00:0c:29:56:fb:44

TI DaVinci EMAC Linux versionupdated 4.0

netconsole: not configured,aborting

Linux video captureinterface: v2.00

vpfe_init

startingccdc_reset...<7>

End ofccdc_reset...<5>vpfe_probe

TVP514X : nummber of channels= 1

vpfe ccdc capture vpfe ccdccapture.1: vpif_register_decoder: decoder = TVP514X

Trying to register davincidisplay video device.

layer=c066b400,layer->video_dev=c066b560

Trying to register davincidisplay video device.

layer=c066b200,layer->video_dev=c066b360

davinci_init:DaVinci V4L2Display Driver V1.0 loaded

af major#: 250, minor# 0

AF Driver initialized

aew major#: 249, minor# 0

AEW Driver initialized

i2c /dev entries driver

nand_davinci nand_davinci.0:Using 4-bit hardware ECC

NAND device: Manufacturer ID:0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)

2 NAND chips detected

Bad block table not found forchip 0

Bad block table not found forchip 1

Bad block table not found forchip 0

Bad block table not found forchip 1

Scanning device for badblocks

Scanning device for badblocks

Creating 5 MTD partitions on"nand_davinci.0":

0x00000000-0x003c0000 :"bootloader"

0x003c0000-0x00400000 :"params"

0x00400000-0x00800000 :"kernel"

0x00800000-0x20800000 :"filesystem1"

0x20800000-0x40000000 :"filesystem2"

nand_davinci nand_davinci.0:hardware revision: 2.3

Pin SPI0_SDO) already usedfor GPIO20.

dm_spi.0: davinci SPIController driver at 0xc581e000 (irq = 42) use_dma=0

Initializing USB Mass Storagedriver...

usbcore: registered newdriver usb-storage

USB Mass Storage supportregistered.

usbcore: registered newdriver usbhid

drivers/usb/input/hid-core.c:v2.6:USB HID core driver

musb_hdrc: version 6.0, pio,host, debug=0

MUX: initialized GPIO33

musb_hdrc: USB Host modecontroller at c5874000 using PIO, IRQ 12

musb_hdrc musb_hdrc: MUSBHDRC host driver

musb_hdrc musb_hdrc: new USBbus registered, assigned bus number 1

usb usb1: configuration #1chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

mice: PS/2 mouse devicecommon for all mice

davinci-mmc davinci-mmc.0:Supporting 4-bit mode

davinci-mmc davinci-mmc.0:Using DMA mode

Advanced Linux SoundArchitecture Driver Version 1.0.12rc1 (Thu Jun 2213:55:50 2006 UTC).

ASoC version 0.13.1

AIC3X Audio Codec 0.2

aic3x_codec_probe ok

asoc: aic3x <->davinci-i2s mapping ok

ALSA device list:

  #0: DaVinci DM365 EVM (aic3x)

IPv4 over IPv4 tunnelingdriver

TCP bic registered

NET: Registered protocolfamily 1

NET: Registered protocolfamily 17

drivers/rtc/hctosys.c: unableto open rtc device (rtc0)

Time: timer0_1 clocksourcehas been installed.

Clock event device timer0_0configured with caps set: 08

Switched to high resolutionmode on CPU 0

IP-Config: Guessing netmask255.255.0.0

IP-Config: Complete:

      device=eth0, addr=172.18.168.223,mask=255.255.0.0, gw=255.255.255.255,

     host=172.18.168.223, domain=,nis-domain=(none),

     bootserver=172.18.168.63, rootserver=172.18.168.63,rootpath=

yaffs: dev is 32505860 nameis "mtdblock4"

yaffs: Attempting MTD mounton 31.4, "mtdblock4"

block 4029 is bad

block 4030 is bad

block 4031 is bad

block 4032 is bad

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009 beingset for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 1009being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

Partially written block 999being set for retirement

VFS: Mounted root (yaffs2filesystem).

Freeing init memory: 200K

INIT: version 2.85 booting

WARNING: .udevdb alreadyexists on the old /dev!

Mounting a tmpfs over/dev...done.

Creating initial devicenodes...done.

Activating swap...done.

Remounting rootfilesystem...done.

Calculating moduledependencies

WARNING: Couldn't opendirectory /lib/modules/2.6.18_pro500-davinci_evm-arm_v5t_le:No such file or directory

FATAL: Could not open/lib/modules/2.6.18_pro500-davinci_evm-arm_v5t_le/modules.dep.tempfor writing: No such file or directory

Loading modules:

Checking all file systems:fsck

fsck 1.35 (28-Feb-2004)

Mounting local filesystems:mount nothing was mounted

Setting up networking(ifupdown) ..

/etc/rc.d/rcS.d/S39ifupdown:line 1: tail: command not found

/etc/rc.d/rcS.d/S39ifupdown:line 84: [: : integer expression expected

Cleaning:/etc/network/run/ifstate done.

Starting hotplug subsystem:

   pci    

   pci     [success]

   usb    

   usb     [success]

   isapnp 

   isapnp  [success]

   ide    

   ide     [success]

   input  

   input   [success]

   scsi   

   scsi    [success]

done.

Starting portmap daemon:portmap/etc/rc.d/rcS.d/S41portmap: line 70: /var/run/portmap.pid: No such fileor directory

.

INIT: Entering runlevel: 3

 

MontaVista(R) Linux(R)Professional Edition 4.0.1 (0600980)

 

172.18.168.223 login:

 

  • 0
    点赞
  • 0
    评论
  • 0
    收藏
  • 打赏
    打赏
  • 扫一扫,分享海报

参与评论 您还未登录,请先 登录 后发表或查看评论
©️2022 CSDN 皮肤主题:编程工作室 设计师:CSDN官方博客 返回首页

打赏作者

zhangjikuan

你的鼓励将是我创作的最大动力

¥2 ¥4 ¥6 ¥10 ¥20
输入1-500的整数
余额支付 (余额:-- )
扫码支付
扫码支付:¥2
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、C币套餐、付费专栏及课程。

余额充值