在云服务器CentOS上使用Cloudera Manager安装CDH5.9.0

一、下载安装包

wget http://archive.cloudera.com/cm5/installer/5.9.0/cloudera-manager-installer.bin
wget http://archive.cloudera.com/cm5/repo-as-tarball/5.9.0/cm5.9.0-centos6.tar.gz
wget http://archive.cloudera.com/cdh5/parcels/5.9.0/manifest.json
wget http://archive.cloudera.com/cdh5/parcels/5.9.0/CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel.sha1
wget http://archive.cloudera.com/cdh5/parcels/5.9.0/CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel

下载好的文件列表:
total 2.2G
-rw-r--r-- 1 root root 1.4G Oct 22  2016 CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel
-rw-r--r-- 1 root root   41 Oct 22  2016 CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel.sha1
-rw-r--r-- 1 root root 505K Oct 21  2016 cloudera-manager-installer.bin
-rw-r--r-- 1 root root 769M Oct 21  2016 cm5.9.0-centos6.tar.gz
-rw-r--r-- 1 root root  63K Oct 22  2016 manifest.json

官网地址:https://community.cloudera.com/

二、检查系统配置

1、刚拿到一个云服务器,首先要看看数据盘,需要挂载一下:

首先用fdisk命令查看一下:
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00021850

   Device Boot      Start         End      Blocks   Id  System
/dev/vda1   *           1        5222    41942016   83  Linux

Disk /dev/vdb: 107.4 GB, 107374182400 bytes
16 heads, 63 sectors/track, 208050 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
有一个100G的数据盘,/dev/vdb,要对它先进行格式化和挂载操作,过程继续:
依次输入n p 1 回车键 回车键 回车键 w
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# fdisk /dev/vdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x70923e97.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-208050, default 1): 
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-208050, default 208050): 
Using default value 208050

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
创建目录/data,用来挂载的:
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# mkdir /data
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# ls -l /data/
total 0
以文件系统mkfs.xfs方式格式化磁盘:
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# fdisk -l

Disk /dev/vda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00021850

   Device Boot      Start         End      Blocks   Id  System
/dev/vda1   *           1        5222    41942016   83  Linux

Disk /dev/vdb: 107.4 GB, 107374182400 bytes
16 heads, 63 sectors/track, 208050 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x70923e97

   Device Boot      Start         End      Blocks   Id  System
/dev/vdb1               1      208050   104857168+  83  Linux
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# mkfs.xfs /dev/vdb1
meta-data=/dev/vdb1              isize=256    agcount=4, agsize=6553573 blks
         =                       sectsz=512   attr=2, projid32bit=0
data     =                       bsize=4096   blocks=26214292, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0
log      =internal log           bsize=4096   blocks=12799, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0

查看uuid
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# ls -lh /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root 10 Sep 10 12:34 9cf938b3-14dc-43b7-910a-32ca7f719c8d -> ../../vdb1
lrwxrwxrwx 1 root root 10 Sep  4 09:29 e2e808db-2c80-46d3-83e9-41c79a84246e -> ../../vda1

挂载操作:
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# ls -lh /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root 10 Sep 10 12:34 9cf938b3-14dc-43b7-910a-32ca7f719c8d -> ../../vdb1
lrwxrwxrwx 1 root root 10 Sep  4 09:29 e2e808db-2c80-46d3-83e9-41c79a84246e -> ../../vda1
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# mount /dev/vdb1 /data/
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/vda1        40G  1.3G   37G   4% /
tmpfs           7.8G     0  7.8G   0% /dev/shm
/dev/vdb1       100G   33M  100G   1% /data
编辑一下vim /etc/fstab文件,文件内容如下:
将之前查到的uuid添加进去,文件系统是xfs,目录是/data
# /etc/fstab
# Created by anaconda on Mon Jul 10 12:25:00 2017
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=e2e808db-2c80-46d3-83e9-41c79a84246e /                       ext4    defaults        1 1
UUID=9cf938b3-14dc-43b7-910a-32ca7f719c8d /data                       xfs    defaults        1 1
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0

重启,然后df -h一下,看是否挂载是否生效:
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/vda1        40G  1.2G   37G   4% /
tmpfs           7.8G     0  7.8G   0% /dev/shm
/dev/vdb1       100G   33M  100G   1% /data


2、修改一下hostname:

hostname取名叫master:
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# hostname
iZwz9ijiwzg03cvfpl14k3Z
[root@iZwz9ijiwzg03cvfpl14k3Z ~]# cat  /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=master
NETWORKING_IPV6=no
PEERNTP=no
GATEWAY=119.23.XXX.XXX
GATEWAY我故意隐藏了。
重启后hostname就生效了:
[root@master ~]# hostname
master

3、创建一个普通用户

建普通用户,暂取名为test,密码123456,随便取一个
[root@master ~]# adduser test
[root@master ~]# passwd test
Changing password for user test.
New password: 
BAD PASSWORD: it is too simplistic/systematic
BAD PASSWORD: is too simple
Retype new password: 
passwd: all authentication tokens updated successfully.

给test用户添加sudu权限,编辑文件vim /etc/sudoers,注意添加好后需要强制保存退出:wq! :
## Next comes the main part: which users can run what software on 
## which machines (the sudoers file can be shared between multiple
## systems).
## Syntax:
##
##      user    MACHINE=COMMANDS
##
## The COMMANDS section may have other options added to it.
##
## Allow root to run any commands anywhere 
root    ALL=(ALL)       ALL
test    ALL=(root)NOPASSWD:ALL

测试一下权限是否配置成功:
[root@master ~]# su test
[test@master root]$ ls /root
ls: cannot open directory /root: Permission denied
[test@master root]$ sudo ls /root

4、查看httpd是否安装,没安装的话要安装上:

$ sudo rpm -qa | grep httpd
$ sudo yum install -y httpd
$ sudo rpm -qa | grep httpd
httpd-tools-2.2.15-60.el6.centos.5.x86_64
httpd-2.2.15-60.el6.centos.5.x86_64
启动httpd并设置开机启动,测试:
$ sudo service httpd start
Starting httpd:                                            [  OK  ]
$ sudo   chkconfig  httpd on
$ sudo chkconfig --list | grep httpd
httpd          	0:off	1:off	2:on	3:on	4:on	5:on	6:off
使用浏览器访问IP进行测试!

5、添加/etc/hosts,有几台机器就添加多少台,内网ip + 空格 + hostname的格式:

[root@master ~]# cat  /etc/hosts
127.0.0.1 localhost
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

10.27.177.1 master

6、selinux要关闭,设置“SELINUX=disabled”:

[root@master ~]# cat /etc/sysconfig/selinux
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#	enforcing - SELinux security policy is enforced.
#	permissive - SELinux prints warnings instead of enforcing.
#	disabled - SELinux is fully disabled.
SELINUX=disabled
# SELINUXTYPE= type of policy in use. Possible values are:
#	targeted - Only targeted network daemons are protected.
#	strict - Full SELinux protection.
SELINUXTYPE=targeted

7、禁止防火墙,并禁止防火墙开机启动:

[test@master ~]$ sudo service  iptables status
iptables: Firewall is not running.
[test@master ~]$ sudo chkconfig  --list | grep  iptables
iptables       	0:off	1:off	2:on	3:on	4:on	5:on	6:off
[test@master ~]$ sudo chkconfig  iptables  off
[test@master ~]$ sudo chkconfig  --list | grep  iptables
iptables       	0:off	1:off	2:off	3:off	4:off	5:off	6:off

8、交换空间设置为0

#cat /proc/sys/vm/swappiness
#sysctl -w vm.swappiness=0
#echo 'vm.swappiness=0'>> /etc/sysctl.conf
#swapoff -a

9、设置文件描述符

/etc/security/limits.d/90-nproc.conf, 将其中的1024也修改为65535
[test@master ~]$ cat  /etc/security/limits.d/90-nproc.conf
# Default limit for number of user's processes to prevent
# accidental fork bombs.
# See rhbz #432903 for reasoning.

*          soft    nproc     65535
root       soft    nproc     unlimited
#ulimit -n 65535
#echo '* soft nofile 65535'>> /etc/security/limits.conf
#echo '* hard nofile 65535'>> /etc/security/limits.conf
#ulimit -n

10、大透明问题:

[root@master ~]# cat /sys/kernel/mm/transparent_hugepage/defrag
[always] madvise never
[root@master ~]# echo never > /sys/kernel/mm/transparent_hugepage/defrag
[root@master ~]# cat /sys/kernel/mm/transparent_hugepage/defrag
always madvise [never]
[root@master ~]# echo 'echo never > /sys/kernel/mm/transparent_hugepage/defrag'>> /etc/rc.local
[root@master ~]# echo never > /sys/kernel/mm/transparent_hugepage/enabled
[root@master ~]# cat /sys/kernel/mm/transparent_hugepage/enabled
always madvise [never]
[root@master ~]# echo 'echo never > /sys/kernel/mm/transparent_hugepage/enabled'>> /etc/rc.local
[root@master ~]# cat  /etc/rc.local 
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local
echo never > /sys/kernel/mm/transparent_hugepage/defrag
echo never > /sys/kernel/mm/transparent_hugepage/enabled

11、配置ssh免密登陆,让所有机器免密互通:

[test@master ~]$ cd
[test@master ~]$ mkdir ~/.ssh
[test@master ~]$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/test/.ssh/id_rsa): 
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /home/test/.ssh/id_rsa.
Your public key has been saved in /home/test/.ssh/id_rsa.pub.
The key fingerprint is:
1f:0b:8b:5a:c6:5a:e9:9e:16:79:a6:7f:da:a0:8f:f1 test@master
The key's randomart image is:
+--[ RSA 2048]----+
|                 |
|                 |
|                 |
|                 |
|       .S .      |
|     .ooo+ o     |
|      O=o o      |
|     Bo* o.      |
|    oo*oEo.      |
+-----------------+
[test@master ~]$ cat  ~/.ssh/id_rsa.pub >>  ~/.ssh/authorized_keys
[test@master ~]$ chmod  700 ~/.ssh/
[test@master ~]$ chmod  600 ~/.ssh/*
[test@master ~]$ cat  ~/.ssh/authorized_keys
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAo5cTL8ZmT0lGMevM4whqyYWTZkUD24Ztd7ZQkuf9jSxt/OBHyfbd8R1JMHafCSH4/CjFl82BuTkBYbQNxcqL31e9/T8ziQxdjl22x+tT3msdltwkG03+pSGvxAWFb//FZA8Nbug+Ipiqe4WaAka2j4MvFmmTbGzS7Ch2nTQ6xHXo0F3xIgdqa8JhLSlYjJzN2XnD+oi9DnTHowDXq3pQyWAr/CbBiXfqIqESdg5AujmWTwJvBXFxu6OaD7vydihxtv+XjMDhaLrG9pIicmatloqJFU2tvwqm45f3pbxDInBDKuXaZTy+CYCFdI9+6WSJbzKmrjOvyzTRwfzoA4yoow== test@master

#例子:将其他节点的文件拷贝到主节点
cat ~/.ssh/id_rsa.pub | ssh 用户名@IP -p 22  'cat >> ~/.ssh/authorized_keys'
#例子:将主节点的authorized_keys文件,分发到其他节点
#scp -P 22 -r ~/.ssh/authorized_keys  用户名@IP:~/.ssh/


12、ntp服务设置

因为我这是云主机,不需要设置此项,其他物理机或者vmware需要设置ntp。

查看一下配置文件/etc/ntp.conf:
[root@master ~]# cat  /etc/ntp.conf
# ntp.conf

driftfile  /var/lib/ntp/drift
pidfile   /var/run/ntpd.pid
logfile /var/log/ntp.log

# Access Control Support
restrict    default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
restrict 127.0.0.1

# local clock
server 127.127.1.0
fudge  127.127.1.0 stratum 10

server ntp1.aliyun.com iburst minpoll 4 maxpoll 10
restrict ntp1.aliyun.com nomodify notrap nopeer noquery
server ntp1.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp1.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp10.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp10.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp11.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp11.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp12.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp12.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp2.aliyun.com iburst minpoll 4 maxpoll 10
restrict ntp2.aliyun.com nomodify notrap nopeer noquery
server ntp2.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp2.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp3.aliyun.com iburst minpoll 4 maxpoll 10
restrict ntp3.aliyun.com nomodify notrap nopeer noquery
server ntp3.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp3.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp4.aliyun.com iburst minpoll 4 maxpoll 10
restrict ntp4.aliyun.com nomodify notrap nopeer noquery
server ntp4.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp4.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp5.aliyun.com iburst minpoll 4 maxpoll 10
restrict ntp5.aliyun.com nomodify notrap nopeer noquery
server ntp5.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp5.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp6.aliyun.com iburst minpoll 4 maxpoll 10
restrict ntp6.aliyun.com nomodify notrap nopeer noquery
server ntp6.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp6.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp7.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp7.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp8.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp8.cloud.aliyuncs.com nomodify notrap nopeer noquery
server ntp9.cloud.aliyuncs.com iburst minpoll 4 maxpoll 10
restrict ntp9.cloud.aliyuncs.com nomodify notrap nopeer noquery

查看ntpd状态,验证同步:
[root@master ~]# service ntpd status
ntpd (pid  1764) is running...
[root@master ~]# ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 LOCAL(0)        .LOCL.          10 l 165m   64    0    0.000    0.000   0.000
+time5.aliyun.co 10.137.38.86     2 u  235  512  377   35.741   27.143   1.884
-10.143.33.49    10.143.0.44      3 u  432  512  377   23.920   26.233   2.208
 100.100.3.1     .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 100.100.3.2     .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 100.100.3.3     .INIT.          16 u    - 1024    0    0.000    0.000   0.000
+120.25.115.19   10.137.38.86     2 u  422  512  377    0.395   26.266   2.234
+10.143.33.50    10.143.0.44      3 u  451  512  377   25.532   23.310   1.890
#120.25.115.20   10.137.38.86     2 u  415  512  377    0.354   29.955   2.249
-10.143.33.51    10.143.0.44      3 u  443  512  377   25.442   26.727   2.247
*time4.aliyun.co 10.137.38.86     2 u  485  512  377    0.393   24.107   1.953
+10.143.0.44     10.137.38.86     2 u  458  512  367   23.724   23.960   2.302
+10.143.0.45     10.143.0.44      3 u  400  512  377   25.390   24.051   1.879
+time6.aliyun.co 10.137.38.86     2 u  413  512  377   44.049   23.346   2.334
+10.143.0.46     10.143.0.44      3 u  413  512  377   25.249   24.317   1.790
 100.100.5.1     .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 100.100.5.2     .INIT.          16 u    - 1024    0    0.000    0.000   0.000
 100.100.5.3     .INIT.          16 u    - 1024    0    0.000    0.000   0.000
[root@master ~]# 



三、安装cm

1、准备yum源:

首先解压cm文件,
[test@master cdh5.9.0]$ pwd
/home/test/cdh5.9.0
[test@master cdh5.9.0]$ ls
CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel       cloudera-manager-installer.bin  manifest.json
CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel.sha1  cm5.9.0-centos6.tar.gz
[test@master cdh5.9.0]$ sudo tar -zxvf cm5.9.0-centos6.tar.gz -C /var/www/html/
cm/
cm/5
cm/5.9
cm/RPM-GPG-KEY-cloudera
cm/cloudera-cm.repo
cm/5.9.0/
cm/5.9.0/mirrors
cm/5.9.0/RPMS/
cm/5.9.0/RPMS/noarch/
cm/5.9.0/RPMS/x86_64/
cm/5.9.0/RPMS/x86_64/cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64.rpm
cm/5.9.0/RPMS/x86_64/cloudera-manager-daemons-5.9.0-1.cm590.p0.249.el6.x86_64.rpm
cm/5.9.0/RPMS/x86_64/cloudera-manager-server-5.9.0-1.cm590.p0.249.el6.x86_64.rpm
cm/5.9.0/RPMS/x86_64/cloudera-manager-server-db-2-5.9.0-1.cm590.p0.249.el6.x86_64.rpm
cm/5.9.0/RPMS/x86_64/enterprise-debuginfo-5.9.0-1.cm590.p0.249.el6.x86_64.rpm
cm/5.9.0/RPMS/x86_64/jdk-6u31-linux-amd64.rpm
cm/5.9.0/RPMS/x86_64/oracle-j2sdk1.7-1.7.0+update67-1.x86_64.rpm
cm/5.9.0/repodata/
cm/5.9.0/repodata/filelists.xml.gz
cm/5.9.0/repodata/filelists.xml.gz.asc
cm/5.9.0/repodata/other.xml.gz
cm/5.9.0/repodata/other.xml.gz.asc
cm/5.9.0/repodata/primary.xml.gz
cm/5.9.0/repodata/primary.xml.gz.asc
cm/5.9.0/repodata/repomd.xml
cm/5.9.0/repodata/repomd.xml.asc
创建文件夹sudo mkdir  -p cm5/redhat/6/x86_64/,与官网路径一致:
[test@master cdh5.9.0]$ cd /var/www/html/
[test@master html]$ pwd
/var/www/html
[test@master html]$ sudo mkdir  -p cm5/redhat/6/x86_64/
[test@master html]$ ls
cm  cm5
[test@master html]$ sudo mv cm cm5/redhat/6/x86_64/
[test@master html]$ ls
cm5

使用浏览器测试一下(http://119.23.XXX.XXX/cm5/redhat/6/x86_64/cm/5/):

配置本地yum:
[test@master html]$ cd /etc/yum.repos.d/
[test@master yum.repos.d]$ sudo vim cloudera-manager.repo
[test@master yum.repos.d]$ cat  cloudera-manager.repo
[cloudera-manager]
name=cloudera-manager
baseurl=http://master/cm5/redhat/6/x86_64/cm/5/
enabled=1
gpgcheck=0
清楚cache并且重建(yum clean all; yum makecache):
[root@master ~]# yum clean all; yum makecache
Loaded plugins: fastestmirror
Cleaning repos: base cloudera-manager epel extras updates
Cleaning up Everything
Cleaning up list of fastest mirrors
Loaded plugins: fastestmirror
Determining fastest mirrors
base                                                                                                                          | 3.7 kB     00:00     
base/group_gz                                                                                                                 | 226 kB     00:00     
base/filelists_db                                                                                                             | 6.4 MB     00:06     
base/primary_db                                                                                                               | 4.7 MB     00:04     
base/other_db                                                                                                                 | 2.8 MB     00:02     
cloudera-manager                                                                                                              |  951 B     00:00     
cloudera-manager/filelists                                                                                                    | 115 kB     00:00     
cloudera-manager/primary                                                                                                      | 4.3 kB     00:00     
cloudera-manager/other                                                                                                        |  621 B     00:00     
cloudera-manager                                                                                                                                 7/7
cloudera-manager                                                                                                                                 7/7
cloudera-manager                                                                                                                                 7/7
epel                                                                                                                          | 4.3 kB     00:00     
epel/group_gz                                                                                                                 | 150 kB     00:00     
epel/filelists_db                                                                                                             | 7.7 MB     00:07     
epel/updateinfo                                                                                                               | 752 kB     00:00     
epel/primary_db                                                                                                               | 5.9 MB     00:05     
epel/other_db                                                                                                                 | 2.9 MB     00:02     
extras                                                                                                                        | 3.4 kB     00:00     
extras/filelists_db                                                                                                           |  25 kB     00:00     
extras/prestodelta                                                                                                            | 1.3 kB     00:00     
extras/primary_db                                                                                                             |  29 kB     00:00     
extras/other_db                                                                                                               |  30 kB     00:00     
updates                                                                                                                       | 3.4 kB     00:00     
updates/filelists_db                                                                                                          | 2.0 MB     00:02     
updates/prestodelta                                                                                                           |  92 kB     00:00     
updates/primary_db                                                                                                            | 3.1 MB     00:03     
updates/other_db                                                                                                              |  42 MB     00:42     
Metadata Cache Created
[root@master ~]# 


2、安装cloudera-manager

执行bin文件:
[root@master cdh5.9.0]# pwd
/home/test/cdh5.9.0
[root@master cdh5.9.0]# ls
CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel       cloudera-manager-installer.bin  manifest.json
CDH-5.9.0-1.cdh5.9.0.p0.23-el6.parcel.sha1  cm5.9.0-centos6.tar.gz
[root@master cdh5.9.0]# chmod 777 cloudera-manager-installer.bin 
[root@master cdh5.9.0]# ./cloudera-manager-installer.bin 

安装过程:


安装完成,访问7180端口, 用户名密码默认admin:



3、登陆网页:




4、
5、
6、
7、

四、安装mysql

1、检查系统是否有安装过的mysql,已经安装过的需要卸载干净:

[root@master cdh5.9.0]# rpm -qa | grep -i mysql
mysql-libs-5.1.73-8.el6_8.x86_64
[root@master cdh5.9.0]# rpm -e --nodeps mysql-libs-5.1.73-8.el6_8.x86_64
[root@master cdh5.9.0]# rpm -qa | grep -i mysql
[root@master cdh5.9.0]# 


2、安装配置mysql:

[root@master cdh5.9.0]# yum install -y mysql mysql-server mysql-devel
检查安装情况:
[root@master cdh5.9.0]# rpm -qa | grep -i mysql
mysql-libs-5.1.73-8.el6_8.x86_64
mysql-devel-5.1.73-8.el6_8.x86_64
mysql-5.1.73-8.el6_8.x86_64
perl-DBD-MySQL-4.013-3.el6.x86_64
mysql-server-5.1.73-8.el6_8.x86_64

启动mysql,service mysqld start:
[root@master cdh5.9.0]# service mysqld start
Initializing MySQL database:  Installing MySQL system tables...
OK
Filling help tables...
OK

To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:

/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h master password 'new-password'

Alternatively you can run:
/usr/bin/mysql_secure_installation

which will also give you the option of removing the test
databases and anonymous user created by default.  This is
strongly recommended for production servers.

See the manual for more instructions.

You can start the MySQL daemon with:
cd /usr ; /usr/bin/mysqld_safe &

You can test the MySQL daemon with mysql-test-run.pl
cd /usr/mysql-test ; perl mysql-test-run.pl

Please report any problems with the /usr/bin/mysqlbug script!

                                                           [  OK  ]
Starting mysqld:                                           [  OK  ]
[root@master cdh5.9.0]# 

修改mysql root密码为123456:
[root@master cdh5.9.0]# /usr/bin/mysqladmin -u root password '123456'
[root@master cdh5.9.0]# /usr/bin/mysqladmin -u root -h master  password '123456'
停止mysql:
[root@master cdh5.9.0]# service mysqld stop
Stopping mysqld:                                           [  OK  ]
[root@master cdh5.9.0]# 

移动mysql目录到挂载的数据盘:
[root@master cdh5.9.0]# cd /var/lib/
[root@master lib]# ls
alternatives  cloud                cloudera-scm-server-db  dhclient  iscsi             misc   ntp    plymouth  random-seed  rsyslog    udev
authconfig    cloudera-scm-server  dav                     games     logrotate.status  mysql  pgsql  postfix   rpm          stateless  yum
[root@master lib]# cp -r mysql /data/
[root@master lib]# cd /data/
[root@master data]# ls -l mysql/
total 20484
-rw-r----- 1 root root 10485760 Sep 12 14:09 ibdata1
-rw-r----- 1 root root  5242880 Sep 12 14:09 ib_logfile0
-rw-r----- 1 root root  5242880 Sep 12 14:09 ib_logfile1
drwx------ 2 root root     4096 Sep 12 14:09 mysql
drwx------ 2 root root        6 Sep 12 14:09 test
[root@master data]# chown -R mysql:mysql mysql/
[root@master data]#

编辑/etc/my.cnf文件:

   
   
[root@master data]# vim /etc/my.cnf [root@master data]# cat  /etc/my.cnf [mysql] socket          = /data/mysql/mysql.sock
[mysqld] datadir=/data/mysql/data socket=/data/mysql/mysql.sock character-set-server=utf8 init_connect='SET NAMES utf8'
symbolic-links=0
log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid
# Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0
log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid
[client] default-character-set=utf8
[root@master data]#

3、创建大数据相关表:
启动mysql并设置开机启动:
[root@master data]# service mysqld start
[root@master data]# chkconfig mysqld on
[root@master data]# chkconfig mysqld --list
mysqld         	0:off	1:off	2:on	3:on	4:on	5:on	6:off

使用空密码登陆mysql:
[root@master data]# mysql -uroot
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 2
Server version: 5.1.73 Source distribution

Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> 





检查mysql是否开机启动,设置MySQL开机启动:
# chkconfig --list | grep mysqld
mysqld         	0:off	1:off	2:off	3:off	4:off	5:off	6:off
# chkconfig  mysqld  on
# chkconfig --list | grep mysqld
mysqld         	0:off	1:off	2:on	3:on	4:on	5:on	6:off



五、安装cdh

六、常用命令

1、检查cloudera-scm-agent状态

# service cloudera-scm-agent status
cloudera-scm-agent is stopped

七、错误排查

1、启动zookeeper时出现下面错误:

stdout:
Fri Sep  8 10:50:41 CST 2017
Cannot find CDH's bigtop-detect-javahome.
Fri Sep  8 10:50:42 CST 2017
Cannot find CDH's bigtop-detect-javahome.
Fri Sep  8 10:50:44 CST 2017
Cannot find CDH's bigtop-detect-javahome.
Fri Sep  8 10:50:47 CST 2017
Cannot find CDH's bigtop-detect-javahome.

stderr:
Fri Sep  8 10:50:41 CST 2017
+ source_parcel_environment
+ '[' '!' -z '' ']'
+ locate_cdh_java_home
+ '[' -z '' ']'
+ '[' -z /usr/libexec/bigtop-utils ']'
+ local BIGTOP_DETECT_JAVAHOME=
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/../bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/lib/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-detect-javahome ']'
+ '[' -z '' ']'
+ echo 'Cannot find CDH'\''s bigtop-detect-javahome.'
+ exit 1
Fri Sep  8 10:50:42 CST 2017
+ source_parcel_environment
+ '[' '!' -z '' ']'
+ locate_cdh_java_home
+ '[' -z '' ']'
+ '[' -z /usr/libexec/bigtop-utils ']'
+ local BIGTOP_DETECT_JAVAHOME=
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/../bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/lib/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-detect-javahome ']'
+ '[' -z '' ']'
+ echo 'Cannot find CDH'\''s bigtop-detect-javahome.'
+ exit 1
Fri Sep  8 10:50:44 CST 2017
+ source_parcel_environment
+ '[' '!' -z '' ']'
+ locate_cdh_java_home
+ '[' -z '' ']'
+ '[' -z /usr/libexec/bigtop-utils ']'
+ local BIGTOP_DETECT_JAVAHOME=
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/../bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/lib/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-detect-javahome ']'
+ '[' -z '' ']'
+ echo 'Cannot find CDH'\''s bigtop-detect-javahome.'
+ exit 1
Fri Sep  8 10:50:47 CST 2017
+ source_parcel_environment
+ '[' '!' -z '' ']'
+ locate_cdh_java_home
+ '[' -z '' ']'
+ '[' -z /usr/libexec/bigtop-utils ']'
+ local BIGTOP_DETECT_JAVAHOME=
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-utils/../bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/lib/bigtop-utils/bigtop-detect-javahome ']'
+ for candidate in '"${JSVC_HOME}"' '"${JSVC_HOME}/.."' '"/usr/lib/bigtop-utils"' '"/usr/libexec"'
+ '[' -e /usr/libexec/bigtop-detect-javahome ']'
+ '[' -z '' ']'
+ echo 'Cannot find CDH'\''s bigtop-detect-javahome.'
+ exit 1

解决思路:
————————————————————————————————————————————————————

2、安装CM过程报错如下:


无法安装 cloudera-manager-agent 包。 (失败步骤)
(当前步骤)
上次刷新时间: 2017-9-8 15:19:03 CST
/tmp/scm_prepare_node.0gQQUN9b
using SSH_CLIENT to get the SCM hostname: 10.27.166.13 44576 29782
opening logging file descriptor
正在启动安装脚本...
正在获取安装锁...
BEGIN flock 4
END (0)
正在检测根权限...
effective UID is 500
BEGIN which pbrun
which: no pbrun in (/usr/local/bin:/bin:/usr/bin)
END (1)
BEGIN sudo -S id
uid=0(root) gid=0(root) groups=0(root)
END (0)
Using 'sudo ' to acquire root privileges
正在检测分配...
BEGIN grep Tikanga /etc/redhat-release
END (1)
BEGIN grep 'CentOS release 5' /etc/redhat-release
END (1)
BEGIN grep 'Scientific Linux release 5' /etc/redhat-release
END (1)
BEGIN grep Santiago /etc/redhat-release
END (1)
BEGIN grep 'CentOS Linux release 6' /etc/redhat-release
END (1)
BEGIN grep 'CentOS release 6' /etc/redhat-release
CentOS release 6.8 (Final)
END (0)
/etc/redhat-release ==> CentOS 6
正在检测 Cloudera Manager Server...
BEGIN host -t PTR 10.27.166.13
/tmp/scm_prepare_node.0gQQUN9b/scm_prepare_node.sh: line 105: host: command not found
END (127)
BEGIN which python
/usr/bin/python
END (0)
BEGIN python -c 'import socket; import sys; s = socket.socket(socket.AF_INET); s.settimeout(5.0); s.connect((sys.argv[1], int(sys.argv[2]))); s.close();' 10.27.166.13 7182
END (0)
BEGIN which wget
END (0)
/usr/bin/wget
BEGIN wget -qO- -T 1 -t 1 http://169.254.169.254/latest/meta-data/public-hostname && /bin/echo
END (4)
正在安装包存储库...
validating format of repository file /tmp/scm_prepare_node.0gQQUN9b/repos/rhel6/cloudera-manager.repo
installing repository file /tmp/scm_prepare_node.0gQQUN9b/repos/rhel6/cloudera-manager.repo
repository file /tmp/scm_prepare_node.0gQQUN9b/repos/rhel6/cloudera-manager.repo installed
正在刷新包元数据...
BEGIN sudo yum clean all
Loaded plugins: fastestmirror
Cleaning repos: base cloudera-manager epel extras updates
Cleaning up Everything
Cleaning up list of fastest mirrors
END (0)
BEGIN sudo rm -Rf /var/cache/yum/x86_64
END (0)
BEGIN sudo yum makecache
Loaded plugins: fastestmirror
Metadata Cache Created
END (0)
正在安装 jdk 包...
BEGIN sudo yum list installed jdk
Loaded plugins: fastestmirror
Error: No matching Packages to list
END (1)
BEGIN sudo yum info jdk
Loaded plugins: fastestmirror
Determining fastest mirrors
Available Packages
Name : jdk
Arch : x86_64
Epoch : 2000
Version : 1.6.0_31
Release : fcs
Size : 68 M
Repo : cloudera-manager
Summary : Java(TM) Platform Standard Edition Development Kit
URL : http://java.sun.com/
License : Copyright (c) 2011, Oracle and/or its affiliates. All rights
: reserved. Also under other license(s) as shown at the Description
: field.
Description : The Java Platform Standard Edition Development Kit (JDK) includes
: both the runtime environment (Java virtual machine, the Java
: platform classes and supporting files) and development tools
: (compilers, debuggers, tool libraries and other tools).
:
: The JDK is a development environment for building applications,
: applets and components that can be deployed with the Java Platform
: Standard Edition Runtime Environment.
END (0)
BEGIN sudo yum -y install jdk.x86_64
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package jdk.x86_64 2000:1.6.0_31-fcs will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
jdk x86_64 2000:1.6.0_31-fcs cloudera-manager 68 M
Transaction Summary
================================================================================
Install 1 Package(s)
Total download size: 68 M
Installed size: 143 M
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : 2000:jdk-1.6.0_31-fcs.x86_64 1/1
Unpacking JAR files...
rt.jar...
jsse.jar...
charsets.jar...
tools.jar...
localedata.jar...
plugin.jar...
javaws.jar...
deploy.jar...
Verifying : 2000:jdk-1.6.0_31-fcs.x86_64 1/1
Installed:
jdk.x86_64 2000:1.6.0_31-fcs
Complete!
END (0)
remote package jdk installed
正在安装 oracle-j2sdk1.7 包...
BEGIN sudo yum list installed oracle-j2sdk1.7
Loaded plugins: fastestmirror
Installed Packages
oracle-j2sdk1.7.x86_64 1.7.0+update67-1 @cloudera-manager
END (0)
BEGIN echo jdk oracle-j2sdk1.7 cloudera-manager-agent cloudera-manager-daemons | grep oracle-j2sdk1.7
jdk oracle-j2sdk1.7 cloudera-manager-agent cloudera-manager-daemons
END (0)
BEGIN sudo yum info oracle-j2sdk1.7
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Installed Packages
Name : oracle-j2sdk1.7
Arch : x86_64
Version : 1.7.0+update67
Release : 1
Size : 279 M
Repo : installed
From repo : cloudera-manager
Summary : no description given
URL : http://example.com/no-uri-given
License : unknown
Description : no description given
END (0)
BEGIN sudo yum -y install oracle-j2sdk1.7.x86_64
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
Package oracle-j2sdk1.7-1.7.0+update67-1.x86_64 already installed and latest version
Nothing to do
END (0)
remote package oracle-j2sdk1.7 installed
正在安装 cloudera-manager-agent 包...
BEGIN sudo yum list installed cloudera-manager-agent
Loaded plugins: fastestmirror
Error: No matching Packages to list
END (1)
BEGIN sudo yum info cloudera-manager-agent
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Available Packages
Name : cloudera-manager-agent
Arch : x86_64
Version : 5.9.0
Release : 1.cm590.p0.249.el6
Size : 8.9 M
Repo : cloudera-manager
Summary : The Cloudera Manager Agent
URL : http://www.cloudera.com
License : Proprietary
Description : The Cloudera Manager Agent.
:
: The Agent is deployed to machines running services managed by
: Cloudera Manager.
END (0)
Version : 5.9.0
Release : 1.cm590.p0.249.el6
BEGIN sudo yum -y install cloudera-manager-agent
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package cloudera-manager-agent.x86_64 0:5.9.0-1.cm590.p0.249.el6 will be installed
--> Processing Dependency: libxslt for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: portmap for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: mod_ssl for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: MySQL-python for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: fuse-libs for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: bind-utils for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: cyrus-sasl-plain for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: cyrus-sasl-gssapi for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: python-psycopg2 for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: openssl-devel for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Running transaction check
---> Package MySQL-python.x86_64 0:1.2.3-0.3.c1.1.el6 will be installed
--> Processing Dependency: libmysqlclient_r.so.16(libmysqlclient_16)(64bit) for package: MySQL-python-1.2.3-0.3.c1.1.el6.x86_64
--> Processing Dependency: libmysqlclient_r.so.16()(64bit) for package: MySQL-python-1.2.3-0.3.c1.1.el6.x86_64
---> Package bind-utils.x86_64 32:9.8.2-0.62.rc1.el6_9.4 will be installed
--> Processing Dependency: bind-libs = 32:9.8.2-0.62.rc1.el6_9.4 for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: liblwres.so.80()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libisccfg.so.82()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libisccc.so.80()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libisc.so.83()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libdns.so.81()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libbind9.so.80()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
---> Package cyrus-sasl-gssapi.x86_64 0:2.1.23-15.el6_6.2 will be installed
---> Package cyrus-sasl-plain.x86_64 0:2.1.23-15.el6_6.2 will be installed
---> Package fuse-libs.x86_64 0:2.8.3-5.el6 will be installed
---> Package libxslt.x86_64 0:1.1.26-2.el6_3.1 will be installed
---> Package mod_ssl.x86_64 1:2.2.15-60.el6.centos.5 will be installed
---> Package openssl-devel.x86_64 0:1.0.1e-57.el6 will be installed
--> Processing Dependency: zlib-devel for package: openssl-devel-1.0.1e-57.el6.x86_64
--> Processing Dependency: krb5-devel for package: openssl-devel-1.0.1e-57.el6.x86_64
---> Package python-psycopg2.x86_64 0:2.0.14-2.el6 will be installed
---> Package rpcbind.x86_64 0:0.2.0-13.el6_9.1 will be installed
--> Processing Dependency: libgssglue for package: rpcbind-0.2.0-13.el6_9.1.x86_64
--> Processing Dependency: libtirpc.so.1()(64bit) for package: rpcbind-0.2.0-13.el6_9.1.x86_64
--> Running transaction check
---> Package bind-libs.x86_64 32:9.8.2-0.62.rc1.el6_9.4 will be installed
---> Package krb5-devel.x86_64 0:1.10.3-65.el6 will be installed
--> Processing Dependency: libkadm5(x86-64) = 1.10.3-65.el6 for package: krb5-devel-1.10.3-65.el6.x86_64
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.10.3-65.el6.x86_64
--> Processing Dependency: libcom_err-devel for package: krb5-devel-1.10.3-65.el6.x86_64
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.10.3-65.el6.x86_64
---> Package libgssglue.x86_64 0:0.1-11.el6 will be installed
---> Package libtirpc.x86_64 0:0.2.1-13.el6_9 will be installed
---> Package mysql-libs.x86_64 0:5.1.73-8.el6_8 will be installed
---> Package zlib-devel.x86_64 0:1.2.3-29.el6 will be installed
--> Running transaction check
---> Package keyutils-libs-devel.x86_64 0:1.4-5.el6 will be installed
---> Package libcom_err-devel.x86_64 0:1.41.12-23.el6 will be installed
---> Package libkadm5.x86_64 0:1.10.3-65.el6 will be installed
---> Package libselinux-devel.x86_64 0:2.0.94-7.el6 will be installed
--> Processing Dependency: libsepol-devel >= 2.0.32-1 for package: libselinux-devel-2.0.94-7.el6.x86_64
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.0.94-7.el6.x86_64
--> Running transaction check
---> Package libsepol-devel.x86_64 0:2.0.41-4.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
cloudera-manager-agent x86_64 5.9.0-1.cm590.p0.249.el6 cloudera-manager 8.9 M
Installing for dependencies:
MySQL-python x86_64 1.2.3-0.3.c1.1.el6 base 86 k
bind-libs x86_64 32:9.8.2-0.62.rc1.el6_9.4 updates 892 k
bind-utils x86_64 32:9.8.2-0.62.rc1.el6_9.4 updates 189 k
cyrus-sasl-gssapi x86_64 2.1.23-15.el6_6.2 base 34 k
cyrus-sasl-plain x86_64 2.1.23-15.el6_6.2 base 31 k
fuse-libs x86_64 2.8.3-5.el6 base 74 k
keyutils-libs-devel x86_64 1.4-5.el6 base 29 k
krb5-devel x86_64 1.10.3-65.el6 base 504 k
libcom_err-devel x86_64 1.41.12-23.el6 base 33 k
libgssglue x86_64 0.1-11.el6 base 23 k
libkadm5 x86_64 1.10.3-65.el6 base 143 k
libselinux-devel x86_64 2.0.94-7.el6 base 137 k
libsepol-devel x86_64 2.0.41-4.el6 base 64 k
libtirpc x86_64 0.2.1-13.el6_9 updates 82 k
libxslt x86_64 1.1.26-2.el6_3.1 base 452 k
mod_ssl x86_64 1:2.2.15-60.el6.centos.5 updates 98 k
mysql-libs x86_64 5.1.73-8.el6_8 base 1.2 M
openssl-devel x86_64 1.0.1e-57.el6 base 1.2 M
python-psycopg2 x86_64 2.0.14-2.el6 base 100 k
rpcbind x86_64 0.2.0-13.el6_9.1 updates 51 k
zlib-devel x86_64 1.2.3-29.el6 base 44 k
Transaction Summary
================================================================================
Install 22 Package(s)
Total download size: 14 M
Installed size: 85 M
Downloading Packages:
--------------------------------------------------------------------------------
Total 4.0 MB/s | 14 MB 00:03
Running rpm_check_debug
Running Transaction Test

Transaction Check Error:
file /usr/share/mysql/charsets/Index.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/armscii8.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/ascii.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/cp1250.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/cp1256.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/cp1257.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/cp850.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/cp852.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/cp866.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/dec8.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/geostd8.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/greek.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/hebrew.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/hp8.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/keybcs2.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/koi8r.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/koi8u.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/latin1.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/latin2.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/latin5.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/latin7.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/macce.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/macroman.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/charsets/swe7.xml from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/czech/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/danish/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/dutch/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/english/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/estonian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/french/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/german/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/greek/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/hungarian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/italian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/japanese/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/korean/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/norwegian-ny/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/norwegian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/polish/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/portuguese/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/romanian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/russian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/serbian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/slovak/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/spanish/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/swedish/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /usr/share/mysql/ukrainian/errmsg.sys from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-common-5.7.18-1.el6.x86_64
file /etc/my.cnf from install of mysql-libs-5.1.73-8.el6_8.x86_64 conflicts with file from package mysql-community-server-5.7.18-1.el6.x86_64
Error Summary
-------------
END (1)
remote package cloudera-manager-agent could not be installed, giving up
waiting for rollback request

错误日志结束!

---------------------------------------------------------------分割线----------------------------------------------------------------------------

cm安装过程中正确日志如下:

上次刷新时间: 2017-9-8 15:27:04 CST
/tmp/scm_prepare_node.EHREDe1J
using SSH_CLIENT to get the SCM hostname: 10.27.166.13 41712 29782
opening logging file descriptor
正在启动安装脚本...
正在获取安装锁...
BEGIN flock 4
END (0)
正在检测根权限...
effective UID is 500
BEGIN which pbrun
which: no pbrun in (/usr/local/bin:/bin:/usr/bin)
END (1)
BEGIN sudo -S id
uid=0(root) gid=0(root) groups=0(root)
END (0)
Using 'sudo ' to acquire root privileges
正在检测分配...
BEGIN grep Tikanga /etc/redhat-release
END (1)
BEGIN grep 'CentOS release 5' /etc/redhat-release
END (1)
BEGIN grep 'Scientific Linux release 5' /etc/redhat-release
END (1)
BEGIN grep Santiago /etc/redhat-release
END (1)
BEGIN grep 'CentOS Linux release 6' /etc/redhat-release
END (1)
BEGIN grep 'CentOS release 6' /etc/redhat-release
CentOS release 6.8 (Final)
END (0)
/etc/redhat-release ==> CentOS 6
正在检测 Cloudera Manager Server...
BEGIN host -t PTR 10.27.166.13
END (127)
/tmp/scm_prepare_node.EHREDe1J/scm_prepare_node.sh: line 105: host: command not found
BEGIN which python
/usr/bin/python
END (0)
BEGIN python -c 'import socket; import sys; s = socket.socket(socket.AF_INET); s.settimeout(5.0); s.connect((sys.argv[1], int(sys.argv[2]))); s.close();' 10.27.166.13 7182
END (0)
BEGIN which wget
/usr/bin/wget
END (0)
BEGIN wget -qO- -T 1 -t 1 http://169.254.169.254/latest/meta-data/public-hostname && /bin/echo
END (4)
正在安装包存储库...
validating format of repository file /tmp/scm_prepare_node.EHREDe1J/repos/rhel6/cloudera-manager.repo
installing repository file /tmp/scm_prepare_node.EHREDe1J/repos/rhel6/cloudera-manager.repo
repository file /tmp/scm_prepare_node.EHREDe1J/repos/rhel6/cloudera-manager.repo installed
正在刷新包元数据...
BEGIN sudo yum clean all
Loaded plugins: fastestmirror
Cleaning repos: base cloudera-manager epel extras updates
Cleaning up Everything
END (0)
BEGIN sudo rm -Rf /var/cache/yum/x86_64
END (0)
BEGIN sudo yum makecache
Loaded plugins: fastestmirror
Metadata Cache Created
END (0)
正在安装 jdk 包...
BEGIN sudo yum list installed jdk
Loaded plugins: fastestmirror
Error: No matching Packages to list
END (1)
BEGIN sudo yum info jdk
Loaded plugins: fastestmirror
Determining fastest mirrors
Available Packages
Name : jdk
Arch : x86_64
Epoch : 2000
Version : 1.6.0_31
Release : fcs
Size : 68 M
Repo : cloudera-manager
Summary : Java(TM) Platform Standard Edition Development Kit
URL : http://java.sun.com/
License : Copyright (c) 2011, Oracle and/or its affiliates. All rights
: reserved. Also under other license(s) as shown at the Description
: field.
Description : The Java Platform Standard Edition Development Kit (JDK) includes
: both the runtime environment (Java virtual machine, the Java
: platform classes and supporting files) and development tools
: (compilers, debuggers, tool libraries and other tools).
:
: The JDK is a development environment for building applications,
: applets and components that can be deployed with the Java Platform
: Standard Edition Runtime Environment.
END (0)
BEGIN sudo yum -y install jdk.x86_64
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package jdk.x86_64 2000:1.6.0_31-fcs will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
jdk x86_64 2000:1.6.0_31-fcs cloudera-manager 68 M
Transaction Summary
================================================================================
Install 1 Package(s)
Total download size: 68 M
Installed size: 143 M
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : 2000:jdk-1.6.0_31-fcs.x86_64 1/1
Unpacking JAR files...
rt.jar...
jsse.jar...
charsets.jar...
tools.jar...
localedata.jar...
plugin.jar...
javaws.jar...
deploy.jar...
Verifying : 2000:jdk-1.6.0_31-fcs.x86_64 1/1
Installed:
jdk.x86_64 2000:1.6.0_31-fcs
Complete!
END (0)
remote package jdk installed
正在安装 oracle-j2sdk1.7 包...
BEGIN sudo yum list installed oracle-j2sdk1.7
Loaded plugins: fastestmirror
Error: No matching Packages to list
END (1)
BEGIN sudo yum info oracle-j2sdk1.7
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Available Packages
Name : oracle-j2sdk1.7
Arch : x86_64
Version : 1.7.0+update67
Release : 1
Size : 135 M
Repo : cloudera-manager
Summary : no description given
URL : http://example.com/no-uri-given
License : unknown
Description : no description given
END (0)
BEGIN sudo yum -y install oracle-j2sdk1.7.x86_64
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package oracle-j2sdk1.7.x86_64 0:1.7.0+update67-1 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
oracle-j2sdk1.7 x86_64 1.7.0+update67-1 cloudera-manager 135 M
Transaction Summary
================================================================================
Install 1 Package(s)
Total download size: 135 M
Installed size: 279 M
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : oracle-j2sdk1.7-1.7.0+update67-1.x86_64 1/1
Verifying : oracle-j2sdk1.7-1.7.0+update67-1.x86_64 1/1
Installed:
oracle-j2sdk1.7.x86_64 0:1.7.0+update67-1
Complete!
END (0)
remote package oracle-j2sdk1.7 installed
正在安装 cloudera-manager-agent 包...
BEGIN sudo yum list installed cloudera-manager-agent
Loaded plugins: fastestmirror
Error: No matching Packages to list
END (1)
BEGIN sudo yum info cloudera-manager-agent
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Available Packages
Name : cloudera-manager-agent
Arch : x86_64
Version : 5.9.0
Release : 1.cm590.p0.249.el6
Size : 8.9 M
Repo : cloudera-manager
Summary : The Cloudera Manager Agent
URL : http://www.cloudera.com
License : Proprietary
Description : The Cloudera Manager Agent.
:
: The Agent is deployed to machines running services managed by
: Cloudera Manager.
END (0)
Version : 5.9.0
Release : 1.cm590.p0.249.el6
BEGIN sudo yum -y install cloudera-manager-agent
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
Resolving Dependencies
--> Running transaction check
---> Package cloudera-manager-agent.x86_64 0:5.9.0-1.cm590.p0.249.el6 will be installed
--> Processing Dependency: cloudera-manager-daemons = 5.9.0 for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: libxslt for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: portmap for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: mod_ssl for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: MySQL-python for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: httpd for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: fuse-libs for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: bind-utils for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: cyrus-sasl-plain for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: cyrus-sasl-gssapi for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: python-psycopg2 for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Processing Dependency: openssl-devel for package: cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64
--> Running transaction check
---> Package MySQL-python.x86_64 0:1.2.3-0.3.c1.1.el6 will be installed
---> Package bind-utils.x86_64 32:9.8.2-0.62.rc1.el6_9.4 will be installed
--> Processing Dependency: bind-libs = 32:9.8.2-0.62.rc1.el6_9.4 for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: liblwres.so.80()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libisccfg.so.82()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libisccc.so.80()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libisc.so.83()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libdns.so.81()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
--> Processing Dependency: libbind9.so.80()(64bit) for package: 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64
---> Package cloudera-manager-daemons.x86_64 0:5.9.0-1.cm590.p0.249.el6 will be installed
---> Package cyrus-sasl-gssapi.x86_64 0:2.1.23-15.el6_6.2 will be installed
---> Package cyrus-sasl-plain.x86_64 0:2.1.23-15.el6_6.2 will be installed
---> Package fuse-libs.x86_64 0:2.8.3-5.el6 will be installed
---> Package httpd.x86_64 0:2.2.15-60.el6.centos.5 will be installed
--> Processing Dependency: httpd-tools = 2.2.15-60.el6.centos.5 for package: httpd-2.2.15-60.el6.centos.5.x86_64
--> Processing Dependency: apr-util-ldap for package: httpd-2.2.15-60.el6.centos.5.x86_64
--> Processing Dependency: /etc/mime.types for package: httpd-2.2.15-60.el6.centos.5.x86_64
--> Processing Dependency: libaprutil-1.so.0()(64bit) for package: httpd-2.2.15-60.el6.centos.5.x86_64
--> Processing Dependency: libapr-1.so.0()(64bit) for package: httpd-2.2.15-60.el6.centos.5.x86_64
---> Package libxslt.x86_64 0:1.1.26-2.el6_3.1 will be installed
---> Package mod_ssl.x86_64 1:2.2.15-60.el6.centos.5 will be installed
---> Package openssl-devel.x86_64 0:1.0.1e-57.el6 will be installed
--> Processing Dependency: zlib-devel for package: openssl-devel-1.0.1e-57.el6.x86_64
--> Processing Dependency: krb5-devel for package: openssl-devel-1.0.1e-57.el6.x86_64
---> Package python-psycopg2.x86_64 0:2.0.14-2.el6 will be installed
--> Processing Dependency: libpq.so.5()(64bit) for package: python-psycopg2-2.0.14-2.el6.x86_64
---> Package rpcbind.x86_64 0:0.2.0-13.el6_9.1 will be installed
--> Processing Dependency: libgssglue for package: rpcbind-0.2.0-13.el6_9.1.x86_64
--> Processing Dependency: libtirpc.so.1()(64bit) for package: rpcbind-0.2.0-13.el6_9.1.x86_64
--> Running transaction check
---> Package apr.x86_64 0:1.3.9-5.el6_2 will be installed
---> Package apr-util.x86_64 0:1.3.9-3.el6_0.1 will be installed
---> Package apr-util-ldap.x86_64 0:1.3.9-3.el6_0.1 will be installed
---> Package bind-libs.x86_64 32:9.8.2-0.62.rc1.el6_9.4 will be installed
---> Package httpd-tools.x86_64 0:2.2.15-60.el6.centos.5 will be installed
---> Package krb5-devel.x86_64 0:1.10.3-65.el6 will be installed
--> Processing Dependency: libkadm5(x86-64) = 1.10.3-65.el6 for package: krb5-devel-1.10.3-65.el6.x86_64
--> Processing Dependency: libselinux-devel for package: krb5-devel-1.10.3-65.el6.x86_64
--> Processing Dependency: libcom_err-devel for package: krb5-devel-1.10.3-65.el6.x86_64
--> Processing Dependency: keyutils-libs-devel for package: krb5-devel-1.10.3-65.el6.x86_64
---> Package libgssglue.x86_64 0:0.1-11.el6 will be installed
---> Package libtirpc.x86_64 0:0.2.1-13.el6_9 will be installed
---> Package mailcap.noarch 0:2.1.31-2.el6 will be installed
---> Package postgresql-libs.x86_64 0:8.4.20-7.el6 will be installed
---> Package zlib-devel.x86_64 0:1.2.3-29.el6 will be installed
--> Running transaction check
---> Package keyutils-libs-devel.x86_64 0:1.4-5.el6 will be installed
---> Package libcom_err-devel.x86_64 0:1.41.12-23.el6 will be installed
---> Package libkadm5.x86_64 0:1.10.3-65.el6 will be installed
---> Package libselinux-devel.x86_64 0:2.0.94-7.el6 will be installed
--> Processing Dependency: libsepol-devel >= 2.0.32-1 for package: libselinux-devel-2.0.94-7.el6.x86_64
--> Processing Dependency: pkgconfig(libsepol) for package: libselinux-devel-2.0.94-7.el6.x86_64
--> Running transaction check
---> Package libsepol-devel.x86_64 0:2.0.41-4.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
cloudera-manager-agent x86_64 5.9.0-1.cm590.p0.249.el6 cloudera-manager 8.9 M
Installing for dependencies:
MySQL-python x86_64 1.2.3-0.3.c1.1.el6 base 86 k
apr x86_64 1.3.9-5.el6_2 base 123 k
apr-util x86_64 1.3.9-3.el6_0.1 base 87 k
apr-util-ldap x86_64 1.3.9-3.el6_0.1 base 15 k
bind-libs x86_64 32:9.8.2-0.62.rc1.el6_9.4 updates 892 k
bind-utils x86_64 32:9.8.2-0.62.rc1.el6_9.4 updates 189 k
cloudera-manager-daemons
x86_64 5.9.0-1.cm590.p0.249.el6 cloudera-manager 528 M
cyrus-sasl-gssapi x86_64 2.1.23-15.el6_6.2 base 34 k
cyrus-sasl-plain x86_64 2.1.23-15.el6_6.2 base 31 k
fuse-libs x86_64 2.8.3-5.el6 base 74 k
httpd x86_64 2.2.15-60.el6.centos.5 updates 836 k
httpd-tools x86_64 2.2.15-60.el6.centos.5 updates 80 k
keyutils-libs-devel x86_64 1.4-5.el6 base 29 k
krb5-devel x86_64 1.10.3-65.el6 base 504 k
libcom_err-devel x86_64 1.41.12-23.el6 base 33 k
libgssglue x86_64 0.1-11.el6 base 23 k
libkadm5 x86_64 1.10.3-65.el6 base 143 k
libselinux-devel x86_64 2.0.94-7.el6 base 137 k
libsepol-devel x86_64 2.0.41-4.el6 base 64 k
libtirpc x86_64 0.2.1-13.el6_9 updates 82 k
libxslt x86_64 1.1.26-2.el6_3.1 base 452 k
mailcap noarch 2.1.31-2.el6 base 27 k
mod_ssl x86_64 1:2.2.15-60.el6.centos.5 updates 98 k
openssl-devel x86_64 1.0.1e-57.el6 base 1.2 M
postgresql-libs x86_64 8.4.20-7.el6 base 202 k
python-psycopg2 x86_64 2.0.14-2.el6 base 100 k
rpcbind x86_64 0.2.0-13.el6_9.1 updates 51 k
zlib-devel x86_64 1.2.3-29.el6 base 44 k
Transaction Summary
================================================================================
Install 29 Package(s)
Total download size: 542 M
Installed size: 764 M
Downloading Packages:
--------------------------------------------------------------------------------
Total 9.7 MB/s | 542 MB 00:55
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : apr-1.3.9-5.el6_2.x86_64 1/29
Installing : apr-util-1.3.9-3.el6_0.1.x86_64 2/29
Installing : libgssglue-0.1-11.el6.x86_64 3/29
Installing : libtirpc-0.2.1-13.el6_9.x86_64 4/29
Installing : rpcbind-0.2.0-13.el6_9.1.x86_64 5/29
Installing : apr-util-ldap-1.3.9-3.el6_0.1.x86_64 6/29
Installing : httpd-tools-2.2.15-60.el6.centos.5.x86_64 7/29
Installing : fuse-libs-2.8.3-5.el6.x86_64 8/29
Installing : libcom_err-devel-1.41.12-23.el6.x86_64 9/29
Installing : 32:bind-libs-9.8.2-0.62.rc1.el6_9.4.x86_64 10/29
Installing : 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64 11/29
Installing : libsepol-devel-2.0.41-4.el6.x86_64 12/29
Installing : libselinux-devel-2.0.94-7.el6.x86_64 13/29
Installing : mailcap-2.1.31-2.el6.noarch 14/29
Installing : httpd-2.2.15-60.el6.centos.5.x86_64 15/29
Installing : 1:mod_ssl-2.2.15-60.el6.centos.5.x86_64 16/29
Installing : libxslt-1.1.26-2.el6_3.1.x86_64 17/29
Installing : cyrus-sasl-plain-2.1.23-15.el6_6.2.x86_64 18/29
Installing : cloudera-manager-daemons-5.9.0-1.cm590.p0.249.el6.x86_64 19/29
Installing : zlib-devel-1.2.3-29.el6.x86_64 20/29
Installing : cyrus-sasl-gssapi-2.1.23-15.el6_6.2.x86_64 21/29
Installing : MySQL-python-1.2.3-0.3.c1.1.el6.x86_64 22/29
Installing : libkadm5-1.10.3-65.el6.x86_64 23/29
Installing : keyutils-libs-devel-1.4-5.el6.x86_64 24/29
Installing : krb5-devel-1.10.3-65.el6.x86_64 25/29
Installing : openssl-devel-1.0.1e-57.el6.x86_64 26/29
Installing : postgresql-libs-8.4.20-7.el6.x86_64 27/29
Installing : python-psycopg2-2.0.14-2.el6.x86_64 28/29
Installing : cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64 29/29
Verifying : rpcbind-0.2.0-13.el6_9.1.x86_64 1/29
Verifying : apr-util-ldap-1.3.9-3.el6_0.1.x86_64 2/29
Verifying : krb5-devel-1.10.3-65.el6.x86_64 3/29
Verifying : httpd-2.2.15-60.el6.centos.5.x86_64 4/29
Verifying : python-psycopg2-2.0.14-2.el6.x86_64 5/29
Verifying : postgresql-libs-8.4.20-7.el6.x86_64 6/29
Verifying : keyutils-libs-devel-1.4-5.el6.x86_64 7/29
Verifying : cloudera-manager-agent-5.9.0-1.cm590.p0.249.el6.x86_64 8/29
Verifying : libkadm5-1.10.3-65.el6.x86_64 9/29
Verifying : MySQL-python-1.2.3-0.3.c1.1.el6.x86_64 10/29
Verifying : cyrus-sasl-gssapi-2.1.23-15.el6_6.2.x86_64 11/29
Verifying : zlib-devel-1.2.3-29.el6.x86_64 12/29
Verifying : apr-util-1.3.9-3.el6_0.1.x86_64 13/29
Verifying : 32:bind-utils-9.8.2-0.62.rc1.el6_9.4.x86_64 14/29
Verifying : openssl-devel-1.0.1e-57.el6.x86_64 15/29
Verifying : cloudera-manager-daemons-5.9.0-1.cm590.p0.249.el6.x86_64 16/29
Verifying : apr-1.3.9-5.el6_2.x86_64 17/29
Verifying : cyrus-sasl-plain-2.1.23-15.el6_6.2.x86_64 18/29
Verifying : 1:mod_ssl-2.2.15-60.el6.centos.5.x86_64 19/29
Verifying : libxslt-1.1.26-2.el6_3.1.x86_64 20/29
Verifying : mailcap-2.1.31-2.el6.noarch 21/29
Verifying : libsepol-devel-2.0.41-4.el6.x86_64 22/29
Verifying : libtirpc-0.2.1-13.el6_9.x86_64 23/29
Verifying : 32:bind-libs-9.8.2-0.62.rc1.el6_9.4.x86_64 24/29
Verifying : libcom_err-devel-1.41.12-23.el6.x86_64 25/29
Verifying : libgssglue-0.1-11.el6.x86_64 26/29
Verifying : libselinux-devel-2.0.94-7.el6.x86_64 27/29
Verifying : fuse-libs-2.8.3-5.el6.x86_64 28/29
Verifying : httpd-tools-2.2.15-60.el6.centos.5.x86_64 29/29
Installed:
cloudera-manager-agent.x86_64 0:5.9.0-1.cm590.p0.249.el6
Dependency Installed:
MySQL-python.x86_64 0:1.2.3-0.3.c1.1.el6
apr.x86_64 0:1.3.9-5.el6_2
apr-util.x86_64 0:1.3.9-3.el6_0.1
apr-util-ldap.x86_64 0:1.3.9-3.el6_0.1
bind-libs.x86_64 32:9.8.2-0.62.rc1.el6_9.4
bind-utils.x86_64 32:9.8.2-0.62.rc1.el6_9.4
cloudera-manager-daemons.x86_64 0:5.9.0-1.cm590.p0.249.el6
cyrus-sasl-gssapi.x86_64 0:2.1.23-15.el6_6.2
cyrus-sasl-plain.x86_64 0:2.1.23-15.el6_6.2
fuse-libs.x86_64 0:2.8.3-5.el6
httpd.x86_64 0:2.2.15-60.el6.centos.5
httpd-tools.x86_64 0:2.2.15-60.el6.centos.5
keyutils-libs-devel.x86_64 0:1.4-5.el6
krb5-devel.x86_64 0:1.10.3-65.el6
libcom_err-devel.x86_64 0:1.41.12-23.el6
libgssglue.x86_64 0:0.1-11.el6
libkadm5.x86_64 0:1.10.3-65.el6
libselinux-devel.x86_64 0:2.0.94-7.el6
libsepol-devel.x86_64 0:2.0.41-4.el6
libtirpc.x86_64 0:0.2.1-13.el6_9
libxslt.x86_64 0:1.1.26-2.el6_3.1
mailcap.noarch 0:2.1.31-2.el6
mod_ssl.x86_64 1:2.2.15-60.el6.centos.5
openssl-devel.x86_64 0:1.0.1e-57.el6
postgresql-libs.x86_64 0:8.4.20-7.el6
python-psycopg2.x86_64 0:2.0.14-2.el6
rpcbind.x86_64 0:0.2.0-13.el6_9.1
zlib-devel.x86_64 0:1.2.3-29.el6
Complete!
END (0)
remote package cloudera-manager-agent installed
正在安装 cloudera-manager-daemons 包...
BEGIN sudo yum list installed cloudera-manager-daemons
Loaded plugins: fastestmirror
Installed Packages
cloudera-manager-daemons.x86_64 5.9.0-1.cm590.p0.249.el6 @cloudera-manager
END (0)
BEGIN echo jdk oracle-j2sdk1.7 cloudera-manager-agent cloudera-manager-daemons | grep cloudera-manager-daemons
jdk oracle-j2sdk1.7 cloudera-manager-agent cloudera-manager-daemons
END (0)
BEGIN sudo yum info cloudera-manager-daemons
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Installed Packages
Name : cloudera-manager-daemons
Arch : x86_64
Version : 5.9.0
Release : 1.cm590.p0.249.el6
Size : 679 M
Repo : installed
From repo : cloudera-manager
Summary : Provides daemons for monitoring Hadoop and related tools.
URL : http://www.cloudera.com
License : Proprietary
Description : This package includes daemons for monitoring and managing Hadoop.
END (0)
Version : 5.9.0
Release : 1.cm590.p0.249.el6
BEGIN sudo yum -y install cloudera-manager-daemons
Loaded plugins: fastestmirror
Setting up Install Process
Loading mirror speeds from cached hostfile
Package cloudera-manager-daemons-5.9.0-1.cm590.p0.249.el6.x86_64 already installed and latest version
Nothing to do
END (0)
remote package cloudera-manager-daemons installed
正在安装“无限强度加密”政策文件。
Installation not requested. Step will be skipped.
正在配置 Cloudera Manager Agent...
BEGIN grep server_host=10.27.166.13 /etc/cloudera-scm-agent/config.ini
END (1)
BEGIN sudo sed -e 's/\(server_host=\).*/\110.27.166.13/' -i /etc/cloudera-scm-agent/config.ini
END (0)
scm agent configured
正在启动 Cloudera Manager Agent...
BEGIN /sbin/service cloudera-scm-agent status
cloudera-scm-agent is stopped
END (3)
BEGIN sudo /sbin/service cloudera-scm-agent start
Starting cloudera-scm-agent: [60G[[0;32m OK [0;39m]
END (0)
agent logs:
BEGIN sudo tail -n 50 /var/log/cloudera-scm-agent//cloudera-scm-agent.out | sed 's/^/>>/'
>>[08/Sep/2017 15:18:53 +0000] 3355 MainThread agent INFO SCM Agent Version: 5.9.0
>>[08/Sep/2017 15:18:53 +0000] 3355 MainThread agent WARNING Expected mode 0751 for /var/run/cloudera-scm-agent but was 0755
>>[08/Sep/2017 15:18:53 +0000] 3355 MainThread agent INFO Re-using pre-existing directory: /var/run/cloudera-scm-agent
>>[08/Sep/2017 15:18:53 +0000] 3355 MainThread agent INFO SCM Agent Version: 5.9.0
>>[08/Sep/2017 15:18:53 +0000] 3355 MainThread agent WARNING Expected mode 0751 for /var/run/cloudera-scm-agent but was 0755
>>[08/Sep/2017 15:18:53 +0000] 3355 MainThread agent INFO Re-using pre-existing directory: /var/run/cloudera-scm-agent
END (0)
BEGIN sudo tail -n 50 /var/log/cloudera-scm-agent//cloudera-scm-agent.log | sed 's/^/>>/'
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO SCM Agent Version: 5.9.0
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Agent Protocol Version: 4
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Using Host ID: 8b5ad319-2a3a-4afe-893d-d17c0d619839
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Using directory: /var/run/cloudera-scm-agent
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Using supervisor binary path: /usr/lib64/cmf/agent/build/env/bin/supervisord
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Neither verify_cert_file nor verify_cert_dir are configured. Not performing validation of server certificates in HTTPS communication. These options can be configured in this agent's config.ini file to enable certificate validation.
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Agent Logging Level: INFO
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO No command line vars
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Missing database jar: /usr/share/java/mysql-connector-java.jar (normal, if you're not using this database type)
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Missing database jar: /usr/share/java/oracle-connector-java.jar (normal, if you're not using this database type)
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Found database jar: /usr/share/cmf/lib/postgresql-9.0-801.jdbc4.jar
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Agent starting as pid 3367 user root(0) group root(0).
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO SCM Agent Version: 5.9.0
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Agent Protocol Version: 4
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Using Host ID: 8b5ad319-2a3a-4afe-893d-d17c0d619839
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Using directory: /var/run/cloudera-scm-agent
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Using supervisor binary path: /usr/lib64/cmf/agent/build/env/bin/supervisord
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Neither verify_cert_file nor verify_cert_dir are configured. Not performing validation of server certificates in HTTPS communication. These options can be configured in this agent's config.ini file to enable certificate validation.
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Agent Logging Level: INFO
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO No command line vars
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Missing database jar: /usr/share/java/mysql-connector-java.jar (normal, if you're not using this database type)
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Missing database jar: /usr/share/java/oracle-connector-java.jar (normal, if you're not using this database type)
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Found database jar: /usr/share/cmf/lib/postgresql-9.0-801.jdbc4.jar
>>[08/Sep/2017 15:18:53 +0000] 3367 MainThread agent INFO Agent starting as pid 3367 user root(0) group root(0).
END (0)
end of agent logs.
scm agent started
已成功完成脚本安装。
all done
closing logging file descriptor


正确日志结束!!


评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值