8.1 Function Call Syntax
A function call resembles a variable reference. It looks like this:
$(<var>function</var> <var>arguments</var>)
or like this:
${<var>function</var> <var>arguments</var>}
Here function is a function name; one of a short list of names that are part of make
. You can also essentially create your own functions by using the call
builtin function.
The arguments are the arguments of the function. They are separated from the function name by one or more spaces or tabs, and if there is more than one argument, then they are separated by commas. Such whitespace and commas are not part of an argument's value. The delimiters which you use to surround the function call, whether parentheses or braces, can appear in an argument only in matching pairs; the other kind of delimiters may appear singly. If the arguments themselves contain other function calls or variable references, it is wisest to use the same kind of delimiters for all the references; write ‘$(subst a,b,$(x))’, not ‘$(subst a,b,${x})’. This is because it is clearer, and because only one type of delimiter is matched to find the end of the reference.
The text written for each argument is processed by substitution of variables and function calls to produce the argument value, which is the text on which the function acts. The substitution is done in the order in which the arguments appear.
Commas and unmatched parentheses or braces cannot appear in the text of an argument as written; leading spaces cannot appear in the text of the first argument as written. These characters can be put into the argument value by variable substitution. First define variables comma
and space
whose values are isolated comma and space characters, then substitute these variables where such characters are wanted, like this:
comma:= , empty:= space:= $(empty) $(empty) foo:= a b c bar:= $(subst $(space),$(comma),$(foo)) # <span class="roman" style="font-family: serif;">bar is now `a,b,c'.</span>
Here the subst
function replaces each space with a comma, through the value of foo
, and substitutes the result.
=================================================================================================================
8.2 Functions for String Substitution and Analysis
Here are some functions that operate on strings:
-
Performs a textual replacement on the text
text: each occurrence of
from is replaced by
to. The result is substituted for the function call. For example,
$(subst ee,EE,feet on the street)
substitutes the string ‘fEEt on the strEEt’.
-
Finds whitespace-separated words in
text that match
pattern and replaces them with
replacement. Here
pattern may contain a ‘
%’ which acts as a wildcard, matching any number of any characters within a word. If
replacement also contains a ‘
%’, the ‘
%’ is replaced by the text that matched the ‘
%’ in
pattern. Only the first ‘
%’ in the
pattern and
replacement is treated this way; any subsequent ‘
%’ is unchanged.
‘%’ characters in
patsubst
function invocations can be quoted with preceding backslashes (‘\’). Backslashes that would otherwise quote ‘%’ characters can be quoted with more backslashes. Backslashes that quote ‘%’ characters or other backslashes are removed from the pattern before it is compared file names or has a stem substituted into it. Backslashes that are not in danger of quoting ‘%’ characters go unmolested. For example, the pattern the\%weird\\%pattern\\ has ‘the%weird\’ preceding the operative ‘%’ character, and ‘pattern\\’ following it. The final two backslashes are left alone because they cannot affect any ‘%’ character.Whitespace between words is folded into single space characters; leading and trailing whitespace is discarded.
For example,
$(patsubst %.c,%.o,x.c.c bar.c)
produces the value ‘x.c.o bar.o’.
Substitution references (see Substitution References) are a simpler way to get the effect of the
patsubst
function:$(<var>var</var>:<var>pattern</var>=<var>replacement</var>)
is equivalent to
$(patsubst <var>pattern</var>,<var>replacement</var>,$(<var>var</var>))
The second shorthand simplifies one of the most common uses of
patsubst
: replacing the suffix at the end of file names.$(<var>var</var>:<var>suffix</var>=<var>replacement</var>)
is equivalent to
$(patsubst %<var>suffix</var>,%<var>replacement</var>,$(<var>var</var>))
For example, you might have a list of object files:
objects = foo.o bar.o baz.o
To get the list of corresponding source files, you could simply write:
$(objects:.o=.c)
instead of using the general form:
$(patsubst %.o,%.c,$(objects))
-
Removes leading and trailing whitespace from
string and replaces each internal sequence of one or more whitespace characters with a single space. Thus, ‘
$(strip a b c )’ results in ‘
a b c’.
The function
strip
can be very useful when used in conjunction with conditionals. When comparing something with the empty string ‘’ usingifeq
orifneq
, you usually want a string of just whitespace to match the empty string (see Conditionals).Thus, the following may fail to have the desired results:
.PHONY: all ifneq "$(needs_made)" "" all: $(needs_made) else all:;@echo 'Nothing to make!' endif
Replacing the variable reference ‘$(needs_made)’ with the function call ‘$(strip $(needs_made))’ in the
ifneq
directive would make it more robust.
-
Searches
in for an occurrence of
find. If it occurs, the value is
find; otherwise, the value is empty. You can use this function in a conditional to test for the presence of a specific substring in a given string. Thus, the two examples,
$(findstring a,a b c) $(findstring a,b c)
produce the values ‘a’ and ‘’ (the empty string), respectively. See Testing Flags, for a practical application of
findstring
. -
Returns all whitespace-separated words in
text that
do match any of the
pattern words, removing any words that
do not match. The patterns are written using ‘
%’, just like the patterns used in the
patsubst
function above.The
filter
function can be used to separate out different types of strings (such as file names) in a variable. For example:sources := foo.c bar.c baz.s ugh.h foo: $(sources) cc $(filter %.c %.s,$(sources)) -o foo
says that foo depends of foo.c, bar.c, baz.s and ugh.h but only foo.c, bar.c and baz.s should be specified in the command to the compiler.
-
Returns all whitespace-separated words in
text that
do not match any of the
pattern words, removing the words that
do match one or more. This is the exact opposite of the
filter
function.For example, given:
objects=main1.o foo.o main2.o bar.o mains=main1.o main2.o
the following generates a list which contains all the object files not in ‘mains’:
$(filter-out $(mains),$(objects))
-
Sorts the words of
list in lexical order, removing duplicate words. The output is a list of words separated by single spaces. Thus,
$(sort foo bar lose)
returns the value ‘bar foo lose’.
Incidentally, since
sort
removes duplicate words, you can use it for this purpose even if you don't care about the sort order.
-
Returns the
nth word of
text. The legitimate values of
n start from 1. If
n is bigger than the number of words in
text, the value is empty. For example,
$(word 2, foo bar baz)
returns ‘bar’.
-
Returns the list of words in
text starting with word
s and ending with word
e (inclusive). The legitimate values of
s start from 1;
e may start from 0. If
s is bigger than the number of words in
text, the value is empty. If
e is bigger than the number of words in
text, words up to the end of
text are returned. If
s is greater than
e, nothing is returned. For example,
$(wordlist 2, 3, foo bar baz)
returns ‘bar baz’.
-
Returns the number of words in
text. Thus, the last word of
text is
$(word $(words
text),
text)
.
-
The argument
names is regarded as a series of names, separated by whitespace. The value is the first name in the series. The rest of the names are ignored.
For example,
$(firstword foo bar)
produces the result ‘foo’. Although
$(firstword
text)
is the same as$(word 1,
text)
, thefirstword
function is retained for its simplicity.
-
The argument
names is regarded as a series of names, separated by whitespace. The value is the last name in the series.
For example,
$(lastword foo bar)
produces the result ‘bar’. Although
$(lastword
text)
is the same as$(word $(words
text),
text)
, thelastword
function was added for its simplicity and better performance.
$(subst
from
,
to
,
text
)
$(patsubst
pattern
,
replacement
,
text
)
$(strip
string
)
$(findstring
find
,
in
)
$(filter
pattern
...,
text
)
$(filter-out
pattern
...,
text
)
$(sort
list
)
$(word
n
,
text
)
$(wordlist
s
,
e
,
text
)
$(words
text
)
$(firstword
names
...)
$(lastword
names
...)
Here is a realistic example of the use of subst
and patsubst
. Suppose that a makefile uses the VPATH
variable to specify a list of directories that make
should search for prerequisite files (see VPATH
Search Path for All Prerequisites). This example shows how to tell the C compiler to search for header files in the same list of directories.
The value of VPATH
is a list of directories separated by colons, such as ‘src:../headers’. First, the subst
function is used to change the colons to spaces:
$(subst :, ,$(VPATH))
This produces ‘src ../headers’. Then patsubst
is used to turn each directory name into a ‘-I’ flag. These can be added to the value of the variable CFLAGS
, which is passed automatically to the C compiler, like this:
override CFLAGS += $(patsubst %,-I%,$(subst :, ,$(VPATH)))
The effect is to append the text ‘-Isrc -I../headers’ to the previously given value of CFLAGS
. The override
directive is used so that the new value is assigned even if the previous value of CFLAGS
was specified with a command argument (see The override
Directive).
8.3 Functions for File Names
Several of the built-in expansion functions relate specifically to taking apart file names or lists of file names.
Each of the following functions performs a specific transformation on a file name. The argument of the function is regarded as a series of file names, separated by whitespace. (Leading and trailing whitespace is ignored.) Each file name in the series is transformed in the same way and the results are concatenated with single spaces between them.
-
Extracts the directory-part of each file name in
names. The directory-part of the file name is everything up through (and including) the last slash in it. If the file name contains no slash, the directory part is the string ‘
./’. For example,
$(dir src/foo.c hacks)
produces the result ‘src/ ./’.
-
Extracts all but the directory-part of each file name in
names. If the file name contains no slash, it is left unchanged. Otherwise, everything through the last slash is removed from it.
A file name that ends with a slash becomes an empty string. This is unfortunate, because it means that the result does not always have the same number of whitespace-separated file names as the argument had; but we do not see any other valid alternative.
For example,
$(notdir src/foo.c hacks)
produces the result ‘foo.c hacks’.
-
Extracts the suffix of each file name in
names. If the file name contains a period, the suffix is everything starting with the last period. Otherwise, the suffix is the empty string. This frequently means that the result will be empty when
names is not, and if
names contains multiple file names, the result may contain fewer file names.
For example,
$(suffix src/foo.c src-1.0/bar.c hacks)
produces the result ‘.c .c’.
-
Extracts all but the suffix of each file name in
names. If the file name contains a period, the basename is everything starting up to (and not including) the last period. Periods in the directory part are ignored. If there is no period, the basename is the entire file name. For example,
$(basename src/foo.c src-1.0/bar hacks)
produces the result ‘src/foo src-1.0/bar hacks’.
-
The argument
names is regarded as a series of names, separated by whitespace;
suffix is used as a unit. The value of
suffix is appended to the end of each individual name and the resulting larger names are concatenated with single spaces between them. For example,
$(addsuffix .c,foo bar)
produces the result ‘foo.c bar.c’.
-
The argument
names is regarded as a series of names, separated by whitespace;
prefix is used as a unit. The value of
prefix is prepended to the front of each individual name and the resulting larger names are concatenated with single spaces between them. For example,
$(addprefix src/,foo bar)
produces the result ‘src/foo src/bar’.
-
Concatenates the two arguments word by word: the two first words (one from each argument) concatenated form the first word of the result, the two second words form the second word of the result, and so on. So the
nth word of the result comes from the
nth word of each argument. If one argument has more words that the other, the extra words are copied unchanged into the result.
For example, ‘$(join a b,.c .o)’ produces ‘a.c b.o’.
Whitespace between the words in the lists is not preserved; it is replaced with a single space.
This function can merge the results of the
dir
andnotdir
functions, to produce the original list of files which was given to those two functions.
-
The argument
pattern is a file name pattern, typically containing wildcard characters (as in shell file name patterns). The result of
wildcard
is a space-separated list of the names of existing files that match the pattern. See Using Wildcard Characters in File Names.
-
For each file name in
names return the canonical absolute name. A canonical name does not contain any
.
or..
components, nor any repeated path separators (/
) or symlinks. In case of a failure the empty string is returned. Consult therealpath(3)
documentation for a list of possible failure causes.
-
For each file name in
names return an absolute name that does not contain any
.
or..
components, nor any repeated path separators (/
). Note that, in contrast torealpath
function,abspath
does not resolve symlinks and does not require the file names to refer to an existing file or directory. Use thewildcard
function to test for existence.
$(dir
names
...)
$(notdir
names
...)
$(suffix
names
...)
$(basename
names
...)
$(addsuffix
suffix
,
names
...)
$(addprefix
prefix
,
names
...)
$(join
list1
,
list2
)
$(wildcard
pattern
)
$(realpath
names
...)
$(abspath
names
...)
8.4 Functions for Conditionals
There are three functions that provide conditional expansion. A key aspect of these functions is that not all of the arguments are expanded initially. Only those arguments which need to be expanded, will be expanded.
-
The
if
function provides support for conditional expansion in a functional context (as opposed to the GNUmake
makefile conditionals such asifeq
(see Syntax of Conditionals).The first argument, condition, first has all preceding and trailing whitespace stripped, then is expanded. If it expands to any non-empty string, then the condition is considered to be true. If it expands to an empty string, the condition is considered to be false.
If the condition is true then the second argument, then-part, is evaluated and this is used as the result of the evaluation of the entire
if
function.If the condition is false then the third argument, else-part, is evaluated and this is the result of the
if
function. If there is no third argument, theif
function evaluates to nothing (the empty string).Note that only one of the then-part or the else-part will be evaluated, never both. Thus, either can contain side-effects (such as
shell
function calls, etc.)
-
The
or
function provides a “short-circuiting” OR operation. Each argument is expanded, in order. If an argument expands to a non-empty string the processing stops and the result of the expansion is that string. If, after all arguments are expanded, all of them are false (empty), then the result of the expansion is the empty string.
-
The
and
function provides a “short-circuiting” AND operation. Each argument is expanded, in order. If an argument expands to an empty string the processing stops and the result of the expansion is the empty string. If all arguments expand to a non-empty string then the result of the expansion is the expansion of the last argument.
$(if
condition
,
then-part
[,
else-part
])
$(or
condition1
[,
condition2
[,
condition3
...]])
$(and
condition1
[,
condition2
[,
condition3
...]])
8.5 The foreach
Function
The foreach
function is very different from other functions. It causes one piece of text to be used repeatedly, each time with a different substitution performed on it. It resembles the for
command in the shell sh
and the foreach
command in the C-shell csh
.
The syntax of the foreach
function is:
$(foreach <var>var</var>,<var>list</var>,<var>text</var>)
The first two arguments, var and list, are expanded before anything else is done; note that the last argument, text, is not expanded at the same time. Then for each word of the expanded value of list, the variable named by the expanded value of var is set to that word, and text is expanded. Presumably text contains references to that variable, so its expansion will be different each time.
The result is that text is expanded as many times as there are whitespace-separated words in list. The multiple expansions of text are concatenated, with spaces between them, to make the result of foreach
.
This simple example sets the variable ‘files’ to the list of all files in the directories in the list ‘dirs’:
dirs := a b c d files := $(foreach dir,$(dirs),$(wildcard $(dir)/*))
Here text is ‘$(wildcard $(dir)/*)’. The first repetition finds the value ‘a’ for dir
, so it produces the same result as ‘$(wildcard a/*)’; the second repetition produces the result of ‘$(wildcard b/*)’; and the third, that of ‘$(wildcard c/*)’.
This example has the same result (except for setting ‘dirs’) as the following example:
files := $(wildcard a/* b/* c/* d/*)
When text is complicated, you can improve readability by giving it a name, with an additional variable:
find_files = $(wildcard $(dir)/*) dirs := a b c d files := $(foreach dir,$(dirs),$(find_files))
Here we use the variable find_files
this way. We use plain ‘=’ to define a recursively-expanding variable, so that its value contains an actual function call to be reexpanded under the control of foreach
; a simply-expanded variable would not do, since wildcard
would be called only once at the time of defining find_files
.
The foreach
function has no permanent effect on the variable var; its value and flavor after the foreach
function call are the same as they were beforehand. The other values which are taken from list are in effect only temporarily, during the execution of foreach
. The variable var is a simply-expanded variable during the execution of foreach
. If var was undefined before the foreach
function call, it is undefined after the call. See The Two Flavors of Variables.
You must take care when using complex variable expressions that result in variable names because many strange things are valid variable names, but are probably not what you intended. For example,
files := $(foreach Esta escrito en espanol!,b c ch,$(find_files))
might be useful if the value of find_files
references the variable whose name is ‘Esta escrito en espanol!’ (es un nombre bastante largo, no?), but it is more likely to be a mistake.
8.6 The call
Function
The call
function is unique in that it can be used to create new parameterized functions. You can write a complex expression as the value of a variable, then use call
to expand it with different values.
The syntax of the call
function is:
$(call <var>variable</var>,<var>param</var>,<var>param</var>,...)
When make
expands this function, it assigns each param to temporary variables $(1)
, $(2)
, etc. The variable $(0)
will contain variable. There is no maximum number of parameter arguments. There is no minimum, either, but it doesn't make sense to use call
with no parameters.
Then variable is expanded as a make
variable in the context of these temporary assignments. Thus, any reference to $(1)
in the value of variable will resolve to the first param in the invocation of call
.
Note that variable is the name of a variable, not a reference to that variable. Therefore you would not normally use a ‘$’ or parentheses when writing it. (You can, however, use a variable reference in the name if you want the name not to be a constant.)
If variable is the name of a builtin function, the builtin function is always invoked (even if a make
variable by that name also exists).
The call
function expands the param arguments before assigning them to temporary variables. This means that variable values containing references to builtin functions that have special expansion rules, like foreach
or if
, may not work as you expect.
Some examples may make this clearer.
This macro simply reverses its arguments:
reverse = $(2) $(1) foo = $(call reverse,a,b)
Here foo will contain ‘b a’.
This one is slightly more interesting: it defines a macro to search for the first instance of a program in PATH
:
pathsearch = $(firstword $(wildcard $(addsuffix /$(1),$(subst :, ,$(PATH))))) LS := $(call pathsearch,ls)
Now the variable LS contains /bin/ls
or similar.
The call
function can be nested. Each recursive invocation gets its own local values for $(1)
, etc. that mask the values of higher-level call
. For example, here is an implementation of a map function:
map = $(foreach a,$(2),$(call $(1),$(a)))
Now you can map a function that normally takes only one argument, such as origin
, to multiple values in one step:
o = $(call map,origin,o map MAKE)
and end up with o containing something like ‘file file default’.
A final caution: be careful when adding whitespace to the arguments to call
. As with other functions, any whitespace contained in the second and subsequent arguments is kept; this can cause strange effects. It's generally safest to remove all extraneous whitespace when providing parameters to call
.
8.7 The value
Function
The value
function provides a way for you to use the value of a variable without having it expanded. Please note that this does not undo expansions which have already occurred; for example if you create a simply expanded variable its value is expanded during the definition; in that case the value
function will return the same result as using the variable directly.
The syntax of the value
function is:
$(value <var>variable</var>)
Note that variable is the name of a variable; not a reference to that variable. Therefore you would not normally use a ‘$’ or parentheses when writing it. (You can, however, use a variable reference in the name if you want the name not to be a constant.)
The result of this function is a string containing the value of variable, without any expansion occurring. For example, in this makefile:
FOO = $PATH all: @echo $(FOO) @echo $(value FOO)
The first output line would be ATH
, since the “$P” would be expanded as a make
variable, while the second output line would be the current value of your $PATH
environment variable, since the value
function avoided the expansion.
The value
function is most often used in conjunction with the eval
function (see Eval Function).
8.8 The eval
Function
The eval
function is very special: it allows you to define new makefile constructs that are not constant; which are the result of evaluating other variables and functions. The argument to the eval
function is expanded, then the results of that expansion are parsed as makefile syntax. The expanded results can define new make
variables, targets, implicit or explicit rules, etc.
The result of the eval
function is always the empty string; thus, it can be placed virtually anywhere in a makefile without causing syntax errors.
It's important to realize that the eval
argument is expanded twice; first by the eval
function, then the results of that expansion are expanded again when they are parsed as makefile syntax. This means you may need to provide extra levels of escaping for “$” characters when using eval
. The value
function (see Value Function) can sometimes be useful in these situations, to circumvent unwanted expansions.
Here is an example of how eval
can be used; this example combines a number of concepts and other functions. Although it might seem overly complex to use eval
in this example, rather than just writing out the rules, consider two things: first, the template definition (in PROGRAM_template
) could need to be much more complex than it is here; and second, you might put the complex, “generic” part of this example into another makefile, then include it in all the individual makefiles. Now your individual makefiles are quite straightforward.
PROGRAMS = server client server_OBJS = server.o server_priv.o server_access.o server_LIBS = priv protocol client_OBJS = client.o client_api.o client_mem.o client_LIBS = protocol # Everything after this is generic .PHONY: all all: $(PROGRAMS) define PROGRAM_template = $(1): $$($(1)_OBJS) $$($(1)_LIBS:%=-l%) ALL_OBJS += $$($(1)_OBJS) endef $(foreach prog,$(PROGRAMS),$(eval $(call PROGRAM_template,$(prog)))) $(PROGRAMS): $(LINK.o) $^ $(LDLIBS) -o $@ clean: rm -f $(ALL_OBJS) $(PROGRAMS)==================================================================================================================
8.9 The origin
Function
The origin
function is unlike most other functions in that it does not operate on the values of variables; it tells you something about a variable. Specifically, it tells you where it came from.
The syntax of the origin
function is:
$(origin <var>variable</var>)
Note that variable is the name of a variable to inquire about; not a reference to that variable. Therefore you would not normally use a ‘$’ or parentheses when writing it. (You can, however, use a variable reference in the name if you want the name not to be a constant.)
The result of this function is a string telling you how the variable variable was defined:
-
‘
undefined’
-
if
variable was never defined.
‘
default’
-
if
variable has a default definition, as is usual with
CC
and so on. See Variables Used by Implicit Rules. Note that if you have redefined a default variable, theorigin
function will return the origin of the later definition.
‘
environment’
-
if
variable was inherited from the environment provided to
make
.
‘
environment override’
-
if
variable was inherited from the environment provided to
make
, and is overriding a setting for variable in the makefile as a result of the ‘ -e’ option (see Summary of Options).
‘
file’
-
if
variable was defined in a makefile.
‘
command line’
-
if
variable was defined on the command line.
‘
override’
-
if
variable was defined with an
override
directive in a makefile (see Theoverride
Directive).
‘
automatic’
- if variable is an automatic variable defined for the execution of the recipe for each rule (see Automatic Variables).
This information is primarily useful (other than for your curiosity) to determine if you want to believe the value of a variable. For example, suppose you have a makefile foo that includes another makefile bar. You want a variable bletch
to be defined in bar if you run the command ‘make -f bar’, even if the environment contains a definition of bletch
. However, if foo defined bletch
before including bar, you do not want to override that definition. This could be done by using an override
directive in foo, giving that definition precedence over the later definition in bar; unfortunately, the override
directive would also override any command line definitions. So, bar could include:
ifdef bletch ifeq "$(origin bletch)" "environment" bletch = barf, gag, etc. endif endif
If bletch
has been defined from the environment, this will redefine it.
If you want to override a previous definition of bletch
if it came from the environment, even under ‘-e’, you could instead write:
ifneq "$(findstring environment,$(origin bletch))" "" bletch = barf, gag, etc. endif
Here the redefinition takes place if ‘$(origin bletch)’ returns either ‘environment’ or ‘environment override’. See Functions for String Substitution and Analysis.
===================================================================================================================
8.10 The flavor
Function
The flavor
function is unlike most other functions (and like origin
function) in that it does not operate on the values of variables; it tells you something about a variable. Specifically, it tells you the flavor of a variable (see The Two Flavors of Variables).
The syntax of the flavor
function is:
$(flavor <var>variable</var>)
Note that variable is the name of a variable to inquire about; not a reference to that variable. Therefore you would not normally use a ‘$’ or parentheses when writing it. (You can, however, use a variable reference in the name if you want the name not to be a constant.)
The result of this function is a string that identifies the flavor of the variable variable:
-
‘
undefined’
-
if
variable was never defined.
‘
recursive’
-
if
variable is a recursively expanded variable.
‘
simple’
- if variable is a simply expanded variable.
8.11 The shell
Function
The shell
function is unlike any other function other than the wildcard
function (see The Function wildcard
) in that it communicates with the world outside of make
.
The shell
function performs the same function that backquotes (‘`’) perform in most shells: it does command expansion. This means that it takes as an argument a shell command and evaluates to the output of the command. The only processing make
does on the result is to convert each newline (or carriage-return / newline pair) to a single space. If there is a trailing (carriage-return and) newline it will simply be removed.
The commands run by calls to the shell
function are run when the function calls are expanded (see How make
Reads a Makefile). Because this function involves spawning a new shell, you should carefully consider the performance implications of using the shell
function within recursively expanded variables vs. simply expanded variables (see The Two Flavors of Variables).
Here are some examples of the use of the shell
function:
contents := $(shell cat foo)
sets contents
to the contents of the file foo, with a space (rather than a newline) separating each line.
files := $(shell echo *.c)
sets files
to the expansion of ‘*.c’. Unless make
is using a very strange shell, this has the same result as ‘$(wildcard *.c)’ (as long as at least one ‘.c’ file exists).
8.12 Functions That Control Make
These functions control the way make runs. Generally, they are used to provide information to the user of the makefile or to cause make to stop if some sort of environmental error is detected.
-
Generates a fatal error where the message is
text. Note that the error is generated whenever this function is evaluated. So, if you put it inside a recipe or on the right side of a recursive variable assignment, it won't be evaluated until later. The
text will be expanded before the error is generated.
For example,
ifdef ERROR1 $(error error is $(ERROR1)) endif
will generate a fatal error during the read of the makefile if the
make
variableERROR1
is defined. Or,ERR = $(error found an error!) .PHONY: err err: ; $(ERR)
will generate a fatal error while
make
is running, if theerr
target is invoked.
-
This function works similarly to the
error
function, above, except thatmake
doesn't exit. Instead, text is expanded and the resulting message is displayed, but processing of the makefile continues.The result of the expansion of this function is the empty string.
- This function does nothing more than print its (expanded) argument(s) to standard output. No makefile name or line number is added. The result of the expansion of this function is the empty string.
$(error
text
...)
$(warning
text
...)
$(info
text
...)