Failed to get convolution algorithm. This is probably because cuDNN failed to initialize

原创 于 2021-11-16 16:43:31 发布
· 173 阅读 · 0 ·
版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#计算机视觉

我的环境：
ubuntu18.04.1
cuda 11.1
cudnn 8.0.5
tf 2.6.0
解决办法有推荐的吗

【TensorFlow2.0】This is probably because cuDNN failed to initialize.错误修正和cuDNN版本更新
licui8068的博客
01-16 1916
今天在环境Ubuntu16.04+TensorFlow2.0+CUDA10.1+cuDNN7.5.0中训练模型，本来是使用CPU计算的，但是后来数据量扩大后CPU已经不能满足需求了，于是便安装了TensorFlow2.0-gpu进行训练。 错误 本来已经挺简单的，因为之前在TensorFlow-gpu1.14+CUDA10.1+cuDNN7.5.0的环境下进行过训练，但是没想到会出现错误 F...
【深度学习】Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so t
m0_52357468的博客
03-09 1163
本人TensorFlow-gpu 2.0 电脑显卡1650ti。 有时候电脑明明gpu没任何占用，跑深度学习代码还是会出现以下这个报错： UnknownError: 2 root error(s) found. (0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log messa
【ERROR】Failed to get convolution algorithm. This is probably because cuDNN failed to initialize
这个人很蓝
09-06 663
1、有可能是显存不足，尝试减小batchsize 2、os.environ['TF_FORCE_GPU_ALLOW_GROWTH'] = 'true' 这个语句的意思是，TensorFlow 在分配显存的时候，设置为可以逐步分配，需要多少显存，就一点点往上添，直到够用为止。比如GPU显存为8GB，开始训练一个模型，TensorFlow 先分配100MB，然后200MB 、300MB……最后在700MB处停住了，因为实际700MB就够用了。参考自 ...
Error : Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so
胡侃有料的博客
03-05 530
every blog every motto: Brevity is the soul of wit 0. 前言 在用tensorflow 进行训练时，添加了如下代码： Error : Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to...
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize解决方法
xiaotiig的博客
11-16 206
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize解决方法 如果tensorflow-gpu的版本是2.0.0，那直接用下面这5句代码就可以解决 from tensorflow.compat.v1 import ConfigProto from tensorflow.compat.v1 import InteractiveSession config = ConfigProto()
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try…
01-06
This is probably because cuDNN failed to initialize, so try…”于是打开retrain.py文件，在前面加上如下代码： from tensorflow.compat.v1 import ConfigProto from tensorflow.compat.v1 import ...
解决Failed to get convolution algorithm. This is probably because cuDNN failed to initialize
qq_38835585的博客
09-23 8426
问题如下： UnknownError (see above for traceback): Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. [[node conv2d_1/convolution (defined at C:\Us
UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed 报错 Jupyter
Welcome
11-02 502
未知错误：获取卷积算法失败。这可能是因为cuDNN失败了。 这可能是由于显存被占用，详细原因可看这篇。 关于keras or tensorflow 显存占用问题 ： keras or tensorflow 显存占用问题 - 简书 解决方法： 1. 如果用的是Keras，在jupyter notebook 最开始添加代码： import tensorflow as tf import numpy as np import keras config = tf.compat.v1.ConfigP
tensorflow卷积报错Failed to get convolution algorithm. This is probably because cuDNN failed t
集电极
07-05 5098
tensorflow2.0卷积报错Failed to get convolution algorithm. This is probably because cuDNN failed t 说明：环境是tensorflow2.0.0,测试GPU没有问题。 但在运行模型出现错误。 UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try lookin
(0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initial
FrankDura的博客
07-30 795
问题 (0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. [[node Encoder_resnet/resnet_v2_50/conv1/Conv2D (defined at /media/frank/easystore/a
(0) unknown: failed to get convolution algorithm. this is probably because cudnn failed to initialize, so try looking to see if a warning log message was printed above.
04-11
this is probably because cudnn failed to initialize, so try looking to see if a warning log message was printed above.'." 的意思是什么？ A: 这个错误提示表示在获取卷积算法时出现了问题，原因很可能是...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值