IOS8 viewWillTransitionToSize:(CGSize)size withTransitionCoordinator:(id<UIViewControllerTransitionC

Working on an app last week, I needed a way to respond to rotation events in a view controller. Since iOS8, the rotation APIs in UIViewController are deprecated:

- (void)willRotateToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation duration:(NSTimeInterval)duration NS_DEPRECATED_IOS(2_0,8_0, "Implement viewWillTransitionToSize:withTransitionCoordinator: instead");
- (void)didRotateFromInterfaceOrientation:(UIInterfaceOrientation)fromInterfaceOrientation NS_DEPRECATED_IOS(2_0,8_0);

- (void)willAnimateRotationToInterfaceOrientation:(UIInterfaceOrientation)toInterfaceOrientation duration:(NSTimeInterval)duration NS_DEPRECATED_IOS(3_0,8_0, "Implement viewWillTransitionToSize:withTransitionCoordinator: instead");

As you can see, they want you to use viewWillTransitionToSize:withTransitionCoordinator: instead.

So, no problem, we'll just implement that method. The only thing is: what if you need to know those "toInterfaceOrientation" or "fromInterfaceOrientation" value from the old APIs?

Because: what if you do want the old behavior? Not everybody has the luxury of going iOS8 only; sure, you can still use the old callbacks - for now. They won't get called once you implement viewWillTransitionToSize:withTransitionCoordinator: , but you might want fallback behavior in addition to the new behavior.

And anyhow, I thought it would be a good exercise to see how we could use this new callback to derive our new interface orientation. Adaptive UI and all, but sometimes is just darn handy to know how your device is held.

Turns out, it's not very hard, but it's not a trivial amount of code.

I looked up session 214 of WWDC 2014: View Controller Advancements in iOS8 by Bruce Nilo (�� video & �� slides ). It's a very interesting talk since he goes into all of the changes they've made, including the changes in rotation behavior.

A particular slide peaked my interest:

Notice the [self orientationFromTransform:[t targetTransform]] . He doesn't go into it (obviously), but I knew what to do.

With some experimentation, it looks like the transform you get via targetTransform is the rotation transform resulting from rotating your device. So if you turn from portrait to landscape it will be a 90º (or π/2 or even M_PI_2 ) rotation, and if you go from landscape left to landscape right it will a 180º rotation. Depending on the direction of the rotation, the angle will be either positive or negative.

So we can use this targetTransform to go from the current interface orientation to the target interfaceorientation: we just need to "add" the rotation to the interface orientation value.

Some work, some math

The approach we'll be taking will be somewhat generic. Generic because we'll calculate the number of 90º "segments" we'll have to go through, and switch to the "next" interfaceorientation for each segment. In the end, we'll have the correct orientation.

This sounds easier than it proved to be. The first problem is calculating how many segments we need from the transform. We can calculate this from the affine transform , which is - and you may or may not know this - a struct representing a matrix. In code, this looks like this:

typedef struct CGAffineTransform CGAffineTransform;
struct CGAffineTransform {
  CGFloat a, b, c, d;
  CGFloat tx, ty;
};

This is a representation of this matrix:

$$\begin{bmatrix} a & b & 0 \\ c & d & 0 \\ tx & ty & 1 \end{bmatrix}$$

This transformation matrix is used to transform the coordinates of the source point(x,y) to a target point (x',y') :

$$\begin{bmatrix} x' & y' & 1 \end{bmatrix} = \begin{bmatrix} x & y & 1 \end{bmatrix} \times \begin{bmatrix} a & b & 0 \\ c & d & 0 \\ tx & ty & 1 \end{bmatrix}$$

For those not well versed in matrix algebra: you traverse each item of the source 1x3 matrix and multiply it with the corresponding row, and then adding these results together. You do this for each column so that you end up with a new 1x3 matrix.

Which results in the following equations:

$$x' = ax + cy + tx$$ $$y' = bx + dy + ty$$ $$1 = 0x + 0y + 1$$

That last one is useless, so we can ignore it.

CGAffineTransform is merely a struct representing the useful values of this matrix, and the transforms you use in your code are just representations of this matrix which is used by Quartz to perform the calculations using the equations above. In effect: the matrix links two coordinate systems — it specifies how points in one coordinate system map to points in another.

So back to our rotation: how does the matrix for a rotation look like? Like this (where α is the angle of the rotation) (for Quartz):

$$\begin{bmatrix} cos \alpha & sin \alpha & 0 \\ -sin \alpha & cos \alpha & 0 \\ 0 & 0 & 1 \end{bmatrix}$$

So when we want the angle from this matrix, we'd need to reverse the the matrix calculations. This is as simple as taking any of the a/b/c/d matrix elements and reverse it:

$$\alpha = acos(a) = acos(d)$$ $$\alpha = asin(b) = -asin(c)$$

Now using acos or asin to get the angle has a tiny problem: each input can result in 2 solutions (this is due to how sine and cosine functions work, of course). Theatan2 function doesn't have this problem since it uses two inputs to calculate the result. It's also better in our case since an affine transform can also contain a scale transform, which has no impact on the result if we use atan2 . So here we go:

angle = atan2f(b, a) // or atan2(d, -c)

Watch out, the atan2 function takes the y parameter first -> RTFM!

If you want to know more about the maths behind this, check out Euler angles and this paper .

Back to our calculations: we actually don't want the angle, but the number of 90º segments of our rotation:

CGFloat angle = atan2f(transform.b, transform.a);
NSInteger multiplier = (NSInteger)roundf(angle / M_PI_2);

We explicitly round the division by π/2 ; relying on the implicit CGFloat to NSInteger conversion isn't good enough since it just takes the integral part of the float (in effect floorf(...) ) which is not what you want.

Note that the angle of rotation will be the inverse of how you rotate the device: if you rotate the device clockwise, the angle of the transform will be negative (and thus counter-clockwise): the transform "counters" the rotation to get back to where we were before the rotation (albeit with other dimensions).

interfaceOrientation: from ➢ to

Now that we know the angle and multiplier, it's time to transform our interface orientation according to this angle. This isn't hard, but it is cumbersome due to how theUIInterfaceOrientation enum is defined:

// Note that UIInterfaceOrientationLandscapeLeft is equal to
// UIDeviceOrientationLandscapeRight (and vice versa). This is because rotating
// the device to the left requires rotating the content to the right.
typedef NS_ENUM(NSInteger, UIInterfaceOrientation) {
  UIInterfaceOrientationUnknown			= UIDeviceOrientationUnknown,
  UIInterfaceOrientationPortrait		   = UIDeviceOrientationPortrait,
  UIInterfaceOrientationPortraitUpsideDown = UIDeviceOrientationPortraitUpsideDown,
  UIInterfaceOrientationLandscapeLeft	  = UIDeviceOrientationLandscapeRight,
  UIInterfaceOrientationLandscapeRight	 = UIDeviceOrientationLandscapeLeft
};

As you can see, it's just a mapping of the corresponding UIDeviceOrientation values, which are defined like this:

typedef NS_ENUM(NSInteger, UIDeviceOrientation) {
  UIDeviceOrientationUnknown,
  UIDeviceOrientationPortrait,		// Device oriented vertically, home btn -> bottom
  UIDeviceOrientationPortraitUpsideDown, // Device oriented vertically, home btn -> top
  UIDeviceOrientationLandscapeLeft,   // Device oriented horizontally, home btn -> right
  UIDeviceOrientationLandscapeRight,  // Device oriented horizontally, home btn -> left
  UIDeviceOrientationFaceUp,		  // Device oriented flat, face up
  UIDeviceOrientationFaceDown		 // Device oriented flat, face down
};

As an aside: You'll notice that there's no equivalent interface orientation for the UIDeviceOrientationFaceUp and UIDeviceOrientationFaceDown , because they make no sense for the interface orientation: it remains the same whether you have the device face up or face down.

I show this because my first idea was to cycle through the orientation values by adding or substracting 1 from each value, wrapping around at the minimum and maximum values of the enum. But looking at these definitions: this is not possible. First of all, the interface orientation values are based on the device orientation values, which have 2 more values we don't care about. And secondly, even if we could use the natural order of the device orientation values, they are shuffled around in the UIInterfaceOrientationLandscapeLeft and UIInterfaceOrientationLandscapeRight switcharoo in the definition of UIInterfaceOrientation .

The net result is that we need to resort to an ugly switch statement:

if (multiplier < 0) {
  // clockwise rotation
  while (multiplier++ < 0) {
    switch (orientation) {
      case UIInterfaceOrientationPortrait:
        orientation = UIInterfaceOrientationLandscapeLeft;
        break;
      case UIInterfaceOrientationLandscapeLeft:
        orientation = UIInterfaceOrientationPortraitUpsideDown;
        break;
      case UIInterfaceOrientationPortraitUpsideDown:
        orientation = UIInterfaceOrientationLandscapeRight;
        break;
      case UIInterfaceOrientationLandscapeRight:
        orientation = UIInterfaceOrientationPortrait;
        break;
      default:
        break;
    }
  }
}
else if (multiplier > 0) {
  // counter-clockwise rotation
  while (multiplier-- > 0) {
    switch (orientation) {
      case UIInterfaceOrientationPortrait:
        orientation = UIInterfaceOrientationLandscapeRight;
        break;
      case UIInterfaceOrientationLandscapeRight:
        orientation = UIInterfaceOrientationPortraitUpsideDown;
        break;
      case UIInterfaceOrientationPortraitUpsideDown:
        orientation = UIInterfaceOrientationLandscapeLeft;
        break;
      case UIInterfaceOrientationLandscapeLeft:
        orientation = UIInterfaceOrientationPortrait;
        break;
      default:
        break;
    }
  }
}

When I said ugly, I meant ugly. �� But there's no real other way to do this, I guess: if there is, please let me know. I initially thought this would also be a bit more robust future wise (you never know when Apple adds another interface orientation), but this code is just as brittle as the addition based code I intentionally wanted to use.

Finally

The final resulting function:

- (UIInterfaceOrientation)orientationByTransforming:(CGAffineTransform)transform fromOrientation:(UIInterfaceOrientation)c
{
  CGFloat angle = atan2f(transform.b, transform.a);
  NSInteger multiplier = (NSInteger)roundf(angle / M_PI_2);
  UIInterfaceOrientation orientation = self.interfaceOrientation;
  if (multiplier < 0) {
    // clockwise rotation
    while (multiplier++ < 0) {
      switch (orientation) {
        case UIInterfaceOrientationPortrait:
          orientation = UIInterfaceOrientationLandscapeLeft;
          break;
        case UIInterfaceOrientationLandscapeLeft:
          orientation = UIInterfaceOrientationPortraitUpsideDown;
          break;
        case UIInterfaceOrientationPortraitUpsideDown:
          orientation = UIInterfaceOrientationLandscapeRight;
          break;
        case UIInterfaceOrientationLandscapeRight:
          orientation = UIInterfaceOrientationPortrait;
          break;
        default:
          break;
      }
    }
  }
  else if (multiplier > 0) {
    // counter-clockwise rotation
    while (multiplier-- > 0) {
      switch (orientation) {
        case UIInterfaceOrientationPortrait:
          orientation = UIInterfaceOrientationLandscapeRight;
          break;
        case UIInterfaceOrientationLandscapeRight:
          orientation = UIInterfaceOrientationPortraitUpsideDown;
          break;
        case UIInterfaceOrientationPortraitUpsideDown:
          orientation = UIInterfaceOrientationLandscapeLeft;
          break;
        case UIInterfaceOrientationLandscapeLeft:
          orientation = UIInterfaceOrientationPortrait;
          break;
        default:
          break;
      }
    }
  }
  return (UIInterfaceOrientation)orientation;
}

It's also available as a gist , by the way. And I'll leave the Swift version as an exercise to the reader. ��

Postscriptum

I later refactored the code not to rely on the interface orientation, which is probably better anyway; but having done the exercise I did want to share it with the world. I googled it, but not find an 'out-of-the-box' solution right away, which either shows that it's a hard problem to tackle or that it's not really a problem needed to be tackled. But here I am, having tackled it, so sharing it for anyone else to use wouldn't hurt anyone, right?

And finally, I'll admit this: I learned a lot of the math behind this in high school and university, but had to actively relearn it all when researching this code and blogpost. Not using these mathematics (apart from the obvious ones you'd use in daily life I guess), resulted in the knowledge either being gone or stuck somewhere in the outback of my brain. However, it was fun to get reacquainted with this knowledge anyway. And while I found an actual usable code solution before diving into the maths myself, I'd really like to understand what I'm actually doing instead of just relying on a copy-paste solution.

So yeah: learning for fun and profit. Who knew?

This post was proofread by: @cocoakevin , @bartverhavert . Many thanks!