使用MMM搭建Mysql同步高可用性

(转)http://blog.chinaunix.net/u/25264/showart.php?id=1811549

 

使用MMM搭建Mysql同步高可用性

先介绍下MMM
MMM是 mysql-master-master的缩写。
MMM项目来自 Google：http://code.google.com/p/mysql-master-master

MySQL本身没有提供replication failover的解决方案，那么如何使Replication方案具有HA的功能呢，那就是MMM。
大家都知道mysql的同步机制在解决实际问题上具有很高的可行性，特别对读写负载比较高的web2.0来说，那么在实际应用中必须保证mysql的稳定性及性能。

Master-Master Replication
1、使用两个MySQL数据库db1,db2，互为Master和Slave，即：
一边db1作为db2的master，一旦有数据写向db0时，db2定时从db1更新
另一边db2也作为db1的master，一旦有数据写向db2时，db1也定时从db2获得更新

2、但从AppServer的角度来说，同时只有一个结点db1扮演Master，另外一个结点db2扮演Slave，不能同时两个结点扮演Master。即AppSever总是把write操作分配某个数据库(db1)，除非db1 failed，被切换。

3、如果扮演Slave的数据库结点db2 Failed了：
a)此时appServer要能够把所有的read,write分配给db1，read操作不再指向db2
b)一旦db2恢复过来后，继续充当Slave角色，并告诉AppServer可以将read分配给它了

4、如果扮演Master的数据库结点db1 Failed了
a)此时appServer要能够把所有的写操作从db1切换分配给db2，也就是切换Master由db2充当
b)db1恢复过来后，充当Slave的角色，Master由db2继续扮演


MMM利用了虚拟IP的技术：1个网卡可以同时使用多个IP。
(所以使用MMM时，需要2*n+1个IP，n为mysql数据库结点个数，包括master,slave)

MMM有3个重要的器件:
1、mmmd_mon    -     数据库控制节点运行。
2、mmm_control -  数据库控制节点运行。
3、mmmd_agent  -     数据库节点（master/slave）运行。


本文环境：
server1 ip: 192.168.1.225 ; virtual read ip:192.168.1.229
server2 ip: 192.168.1.226 ; virtual read ip:192.168.1.230

server3 ip: 192.168.1.227
virtual write ip: 192.168.1.231


配置过程很简单，
server1 server2 replication双向 master-master
server1 server2 安装mmm并配置mmm_agent.conf
server3 安装mmm并配置mmm_mon.conf

1，首先我们要先配置好master-master双向同步，这一步就不多说了。
2，安装部署MMM
3台服务器都要安装MMM软件，安装过程如下：

安装如下perl模块，为MMM安装做好准备，
cpan Algorithm::Diff
cpan Proc::Daemon
cpan Time::HiRes
cpan DBI
cpan DBD::mysql

wget http://mysql-master-master.googlecode.com/files/mmm-1.0-pre2.tar.bz2
tar xzf mmm-1.0-pre2.tar.bz2
cd mmm-1.0-pre2
./install.pl

3，在server1上配置MMM
修改配置 /usr/local/mmm/etc/mmm_agent.conf，如下：

#
# Master-Master Manager config (agent)
#

# Debug mode
debug no

# Paths
pid_path /usr/local/mmm/var/mmmd_agent.pid
bin_path /usr/local/mmm/bin

# Logging setup
log mydebug
file /usr/local/mmm/var/mmm-debug.log
level debug

log mytraps
file /usr/local/mmm/var/mmm-traps.log
level trap

# MMMD command socket tcp-port and ip
bind_port 9989

# Cluster interface
cluster_interface eth0

# Define current server id
this db1
mode master

# For masters
peer db2

# Cluster hosts addresses and access params
host db1
ip 192.168.1.225
port 3306
user rep_agent
password RepAgent

host db2
ip 192.168.1.226
port 3306
user rep_agent
password RepAgent

GRANT ALL PRIVILEGES on *.* to 'rep_agent'@'%′ identified by 'RepAgent';
GRANT ALL PRIVILEGES on *.* to 'rep_monitor'@'%' identified by 'RepMonitor';


3，在server2上配置MMM
修改配置 /usr/local/mmm/etc/mmm_agent.conf，如下：

#
# Master-Master Manager config (agent)
#

# Debug mode
debug no

# Paths
pid_path /usr/local/mmm/var/mmmd_agent.pid
bin_path /usr/local/mmm/bin

# Logging setup
log mydebug
file /usr/local/mmm/var/mmm-debug.log
level debug

log mytraps
file /usr/local/mmm/var/mmm-traps.log
level trap

# MMMD command socket tcp-port and ip
bind_port 9989

# Cluster interface
cluster_interface eth0

# Define current server id
this db2
mode master

# For masters
peer db1

# Cluster hosts addresses and access params
host db1
ip 192.168.1.225
port 3306
user rep_agent
password RepAgent

host db2
ip 192.168.1.226
port 3306
user rep_agent
password RepAgent

GRANT ALL PRIVILEGES on *.* to 'rep_agent'@'%′ identified by 'RepAgent';
GRANT ALL PRIVILEGES on *.* to 'rep_monitor'@'%' identified by 'RepMonitor';


3，在server3上配置MMM
修改配置 /usr/local/mmm/etc/mmm_mon.conf，如下：

#
# Master-Master Manager config (monitor)
#

# Debug mode
debug no

# Paths
pid_path /usr/local/mmm/var/mmmd.pid
status_path /usr/local/mmm/var/mmmd.status
bin_path /usr/local/mmm/bin

# Logging setup
log mydebug
    file /usr/local/mmm/var/mmm-debug.log
    level debug

log mytraps
    file /usr/local/mmm/var/mmm-traps.log
    level trap
    email root@localhost


# MMMD command socket tcp-port
bind_port 9988
agent_port 9989
monitor_ip 127.0.0.1

# Cluster interface
cluster_interface eth0

# Cluster hosts addresses and access params
host db1
    ip 192.168.1.225
    port 3306
    user rep_monitor
    password RepMonitor
    mode master
    peer db2

host db2
    ip 192.168.1.226
    port 3306
    user rep_monitor
    password RepMonitor
    mode master
    peer db1



#
# Define roles
#

active_master_role writer

# Mysql Reader role
role reader
    mode balanced
    servers db1, db2
    ip 192.168.1.229, 192.168.1.230

# Mysql Writer role
role writer
    mode exclusive
    servers db1, db2
    ip 192.168.1.231

#
# Checks parameters
#

# Ping checker
check ping
    check_period 1
    trap_period 5
    timeout 2

# Mysql checker
# (restarts after 10000 checks to prevent memory leaks)
check mysql
    check_period 1
    trap_period  2
    timeout 2
    restart_after 10000

# Mysql replication backlog checker
# (restarts after 10000 checks to prevent memory leaks)
check rep_backlog
    check_period 5
    trap_period 10
    max_backlog 60
    timeout 2
    restart_after 10000

# Mysql replication threads checker
# (restarts after 10000 checks to prevent memory leaks)
check rep_threads
    check_period 1
    trap_period 5
    timeout 2
    restart_after 10000
    
   
启动
server1 与 server2上分别启动mmmd_agent
[root@localhost ~]# mmmd_agent
[root@localhost ~]# netstat -tlnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name  
tcp        0      0 0.0.0.0:9989                0.0.0.0:*                   LISTEN      26010/perl 

出现9989端口说明启动成功。


server3上启动mmmd_mon
[root@localhost etc]# mmmd_mon
Reading config file: 'mmm_mon.conf'
$VAR1 = {
          'db2' => {
                     'roles' => [
                                  'reader(192.168.1.229;)'
                                ],
                     'version' => '0',
                     'state' => 'ONLINE'
                   },
          'db1' => {
                     'roles' => [
                                  'reader(192.168.1.230;)',
                                  'writer(192.168.1.231;)'
                                ],
                     'version' => '0',
                     'state' => 'ONLINE'
                   }
        };
Role: 'reader(192.168.1.229;)'
Adding role: 'reader' with ip '192.168.1.229'
Role: 'reader(192.168.1.230;)'
Adding role: 'reader' with ip '192.168.1.230'
Role: 'writer(192.168.1.231;)'
Adding role: 'writer' with ip '192.168.1.231'

在管理节点上（server3）启动db节点：
mmm_control set_online db1
mmm_control set_online db2

查看下节点状态：
[root@localhost etc]# mmm_control show
Config file: mmm_mon.conf
Daemon is running!
Servers status:
  db1(192.168.1.225): master/ONLINE. Roles: reader(192.168.1.230;), writer(192.168.1.231;)
  db2(192.168.1.226): master/ONLINE. Roles: reader(192.168.1.229;)



OK,能看到这个效果说明你已经配置成功了，下面就可以随心所欲的折腾mysql的异常状态，来进行测试。