modem上各种指示灯的意义

TM (Test Modem) Lights when operating in test mode.
HS (High-speed) Lights when communicating at 48000 bps or faster.

AA (Auto-Answer) Lights when Auto-Answer is activated. Blinks when detecting an incoming ring.

RI (Ring Indicate) Blinks when detecting incoming ring.

CD (Carrier Detect) Lights when the Data Carrier Detect (DCD) signal from the modem to the computer is on.

OH (Off Hold) Lights when the modem is off hold.

TD (Transmit Data) or SD (Send Data) Flashes whenever data or commands are transmitted from the serial port of your computer or other device to the modem.

RD (Receive Data) Flashes when data is sent from the modem to your computer or other serial device. At high speeds light may appear continuously on.

TR (Terminal Ready) Lights when the computer is ready to send or receive data. Indicates the status of the DTR signal from the terminal or computer.

CS (Clear to Send) Lights when the faxmodem can accept data from the computer.

MR (Modem Ready) Lights when the modem is turned on. Flashes when the modem is in self-test mode. DC (Data Compression) Lights when using V.44, V.42bis, or MNP 5 data compression.

EC (Error Correction) Lights when sending data using V.42 or MNP 4 error correction.

HOLD (Modem On Hold) Lights when a call is detected. If you accept the call, the light stays on for the duration of the call; if you refuse the call, the light goes off.