使用OpenWrt开发嵌入式Linux（四）：创建分区

创建分区非常简单，直接修改DTS文件：target/linux/samsung/dts/TQ210.dts

&nand {
    status = "okay";
    nand-ecc-mode = "soft";

    partition@0 {
        label = "boot";
        reg = <0x0 0x40000>;        /* 246KB */
        read-only;
    };

    partition@40000 {
        label = "kernel";
        reg = <0x40000 0x300000>;   /* 3MB */
    };

    partition@340000 {
        label = "rootfs";
        reg = <0x340000 0x3fcc0000>; /* 1020MB */
    };
};

这里给boot分区添加了只读属性：read-only

重新编译固件

make -j4

运行内核，将看到如下信息

[    1.327161] 3 fixed-partitions partitions found on MTD device b0e00000.nand
[    1.327224] Creating 3 MTD partitions on "b0e00000.nand":
[    1.327278] 0x000000000000-0x000000040000 : "boot"
[    1.327892] 0x000000040000-0x000000340000 : "kernel"
[    1.328409] 0x000000340000-0x000040000000 : "rootfs"

root@OpenWrt:/# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00040000 00020000 "boot"
mtd1: 00300000 00020000 "kernel"
mtd2: 3fcc0000 00020000 "rootfs"