RISC-V编译环境搭建

1.JTAG调试器设置
将JTAG调试器连接PC，并断开主机连接将其连接到UBUNTU虚拟机，运行

lsusb

应该有以下这个设备：

Bus 002 Device 010: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC

设置udev rules，使JTAG调试器可以被plugdev group访问

sudo gedit /etc/udev/rules.d/99-vmware-scsi-udev.rules

在里面添加

ATTR{idVendor}=="0403", ATTR{idProduct}=="6010", MODE="660", GROUP="plugdev"

使用如下命令查看该USB设备是否属于plugdev group

ls -l / /dev/ttyUSB1

将用户名添加到plugdev group中
whoami
sudo usermod -a -G plugdev username
确认自己的用户名是否属于plugdev group

groups

2. 将gnu-mcu-eclipse-openocd-0.10.0-8-20180724-1118-centos64.tgz放到~/根目录下，并解压

     cd ~/
     tar -xzvf gnu-mcu-eclipse-openocd-0.10.0-8-20180724-1118-centos64.tgz 
     cd ~/e200_opensource/sirv-e-sdk/
     mkdir -p work/build/opencd/prefix
     cd work/build/opencd/prefix/
     ln -s ~/gnu-mcu-eclipse/openocd/0.10.0-8-20180724-1118/bin/ bin
     cd ~/e200_opensource/sirv-e-sdk/
     mkdir -p work/build/riscv-gnu-toolchain/risc32-unknown-elf/prefix/
     cd work/build/riscv-gnu-toolchain/risc32-unknown-elf/prefix/
     ln -s ~/gnu-mcu-eclipse/riscv-none-gcc/7.2.0-2-20180111-2230/bin/ bin

3.编译demo_gpio程序，命令如下：

cd ~/e200_opensource/sirv-e-sdk/
make software PROGRAM=demo_gpio BOARD=sirv-e203-arty