网卡移植报错

 

U-Boot 2012.07 (Aug 30 2012 - 21:55:43)

+++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++              Welcome to my u-boot               +++
+++                        Liyong-zou               +++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
CPUID: 32440001
FCLK:      400 MHz
HCLK:      100 MHz
PCLK:       50 MHz
DRAM:  64 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   dm9000
Hit any key to stop autoboot:  0
dm9000 i/o: 0x20000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 00:01:02:03:04:05
could not establish link
Using dm9000 device
File transfer via NFS from server 192.168.1.30; our IP address is 192.168.1.20
Filename '/nfsboot/uImage'.
Load address: 0x30008000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #####################T T T T T T T *** ERROR: Cannot umount
## Booting kernel from Legacy Image at 30008000 ...
   Image Name:   Linux-2.6.34.7
   Created:      2013-06-16  12:39:38 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2102760 Bytes = 2 MiB
   Load Address: 30008000
   Entry Point:  30008040
   Verifying Checksum ... OK
   XIP Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Linux version 2.6.34.7 (liyong-zou-book@liyong-zou) (gcc version 4.4.3 (ctng-1.6.1) ) #8 Sun Jun 16 20:39:27 CST 2013
[    0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=00007177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: MINI2440
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] CPU S3C2440A (id 0x32440001)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz
[    0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: noinitrd root=/dev/nfs nfsroot=192.168.1.30:/nfsboot/rootfs,tcp ip=192.168.1.20:192.168.1.30:192.168.1.1:255.255.255.0::eth0:off console=ttySAC0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 64MB = 64MB total
[    0.000000] Memory: 60644k/60644k available, 4892k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xc4800000 - 0xe0000000   ( 440 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc4000000   (  64 M