2410/2440 中IO端口PULL-UP寄存器

S3C2410的I/O口，datasheet上P266上面有这样一段话：

PORT PULL-UP REGISTER (GPBUP-GPHUP)
The port pull-up register controls the pull-up resister enable/disable of each port group. When the corresponding
bit is 0, the pull-up resister of the pin is enabled. When 1, the pull-up resister is disabled.
If the port pull-up register is enabled, the pull-up resisters work without pin’s functional setting (input, output,
DATAn, EINTn, etc).

可见对应于S3C2410的GPB-BPH口内部有上拉电阻寄存器，当相应的上拉电阻使能时，对应的I/O引脚悬空时，表现出高电平。反之，表现出低电平。