qte安装dbus

  A.交叉编译D-Bus.

        (1).download 

            [1] dbus-1.2.24.tar.gz

             http://www.freedesktop.org/wiki/Software/dbus

            [2].expat-2.0.1.tar.gz

             http://sourceforge.net/projects/expat/

         (2).install

             [1] .expat

                tar zxvf expat-2.0.1.tar.gz
                cd expat-2.0.1/
                ./configure --host=arm-linux --prefix=/home/zhxt/project/expat4arm/  CC=arm-linux-gcc
                 make;make install

             [2] .dbus

                 tar zxvf dbus-1.2.24.tar.gz 
                 cd dbus-1.2.24
                 ./configure --prefix=/usr/local/dbus/ --host=arm-linux --with-x=no ac_cv_have_abstract_sockets=yes "CC=arm-linux-gcc  -I/usr/local/expat/include -L/usr/local/expat/lib"
                 make && make install

       B.交叉编译Qt

         <1>. configure with  " -dbus " or " -dbus-linked "

         <2>. 包含dbus的两个.h文件和一个lib文件, 在lib文件后添加 -ldbus-1，格式如下：

              -dbus -I/usr/local/dbus/include/dbus-1.0 -I/usr/local/dbus/lib/dbus-1.0/include -L/usr/local/dbus/lib -ldbus-1

          注：在qte-arm configure/make成功后，最好也将tools/qdbus/qdbus编译并安装，编译成功后的qdbus会为ARM下D-Bus的调试工作带来极大的便利。

qte安装dbus来源网络，如有侵权请告知，即处理！