RH9下配置ADSL上网

注：RH9自带的PPPOE不能用，要自己重新下载安装。先卸载系统自带的！！

 

#adsl-setup

 

 

 

 Welcome to the Roaring Penguin ADSL client setup. First, I will runsome checks on your system to make sure the PPPoE client is installedproperly...
Looks good! Now, please enter some information:
USER NAME

>>> Enter your PPPoE user name (default XXX):XXXX

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modemFor Solaris, this is likely to be something like /dev/hme0.For Linux, it will be ethn, where 'n' is a number.(default eth0):

Do you want the link to come up on demand, or stay up continuously?If you want it to come up on demand, enter the idle time in secondsafter which the link should be dropped. If you want the link tostay up permanently, enter 'no' (two letters, lower-case.)NOTE: Demand-activated links do not interact well with dynamic IPaddresses. You may have some problems with demand-activated links.

>>> Enter the demand value (default no):直接回车

DNSPlease enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide DNS addresses',enter 'server' (all lower-case) here.If you just press enter, I will assume you know what you aredoing and not modify your DNS setup.

>>> Enter the DNS information here:写入自己所在地的DNS

PASSWORD

>>> Please enter your PPPoE password:XXXXXX

>>> Please re-enter your PPPoE password:XXXXXX

FIREWALLING
Please choose the firewall rules to use. Note that these rules arevery basic. You are strongly encouraged to use a more sophisticatedfirewall setup; however, these will provide basic security. If youare running any servers on your machine, you must choose 'NONE' andset up firewalling yourself. Otherwise, the firewall rules will denyaccess to all standard servers like Web, e-mail, ftp, etc. If youare using SSH, the rules will block outgoing SSH connections whichallocate a privileged source port.
The firewall choices are:0 - NONE: This script will not set any firewall rules. You are responsiblefor ensuring the security of your machine. You are STRONGLYrecommended to use some kind of firewall rules.1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation2 - MASQUERADE: Appropriate for a machine acting as an Internet gatewayfor a LAN

>>> Choose a type of firewall (0-2) 根据自己应用设置防火墙级别

** Summary of what you entered **
Ethernet Interface: eth0User name: XXXX Activate-on-demand: XXXXX: Do not adjustFirewalling: XXXXXXXXXXXX

>>> Accept these settings and adjust configuration files (y/n)?y

# adsl-start