qperf 使用总结

 qperf 安装 客户端和服务端yum install qperf

[Could not resolve host: mirrors.rockylinux.org]
[root@]# rpm -ivh qperf-0.4.11-2.el8.x86_64.rpm
warning: qperf-0.4.11-2.el8.x86_64.rpm: Header V4 RSA/SHA256 Signature, key ID 6d745a60: NOKEY
Verifying...                          ################################# [100%]
Preparing...                          ################################# [100%]
        file /usr/bin/qperf from install of qperf-0.4.11-2.el8.x86_64 conflicts with file from package qperf-0.4.9-3.el7.x86_64
        file /usr/share/man/man1/qperf.1.gz from install of qperf-0.4.11-2.el8.x86_64 conflicts with file from package qperf-0.4.9-3.el7.x86_64
[root@~]# qperf

服务端开启

[root@ ~]# qperf

客户端使用

#测试带宽
[root@ ~]# qperf -t 60 --use_bits_per_sec 10.23.11.46 tcp_bw
tcp_bw:
    bw  =  925 Mb/sec


#测试延时
[root@ ~]# qperf -t 60 --use_bits_per_sec 10.23.11.46 tcp_lac
tcp_lac: bad test; try: qperf --help tests
[root@ ~]# qperf -t 60 --use_bits_per_sec 10.23.11.46 tcp_lat
tcp_lat:
    latency  =  27.2 us


#带宽延时一块测试
[root@ ~]# qperf -t 60 --use_bits_per_sec 10.23.11.46 tcp_lat tcp_bw
tcp_lat:
    latency  =  25.6 us
tcp_bw:
    bw  =  925 Mb/sec


#：可循环遍历测试，每次增加测试字节大小，从4K开始，以2的幂递增，直到128K结束，这样可以一次性拿到不同字节大小的带宽及延迟指标
[root@1 ~]# qperf 10.23.11.46 -oo msg_size:4k:128k:*2 -vu tcp_bw tcp_lat
tcp_bw:
    bw        =  116 MB/sec
    msg_size  =    4 KB
tcp_bw:
    bw        =  116 MB/sec
    msg_size  =    8 KB
tcp_bw:
    bw        =  116 MB/sec
    msg_size  =   16 KB
tcp_bw:
    bw        =  114 MB/sec
    msg_size  =   32 KB
tcp_bw:
    bw        =  116 MB/sec
    msg_size  =   64 KB
tcp_bw:
    bw        =  115 MB/sec
    msg_size  =  125 KiB (128,000)
tcp_lat:
    latency   =  192 us
    msg_size  =    4 KB
tcp_lat:
    latency   =  209 us
    msg_size  =    8 KB
tcp_lat:
    latency   =  227 us
    msg_size  =   16 KB
tcp_lat:
    latency   =  410 us
    msg_size  =   32 KB
tcp_lat:
    latency   =  743 us
    msg_size  =   64 KB
tcp_lat:
    latency   =  1.31 ms
    msg_size  =   125 KiB (128,000)