LINUX下实时录放音（OSS）—解决时延问题

#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <stdlib.h>
#include <stdio.h>
#include <linux/soundcard.h>
#include <termios.h>



#define RATE    16000 //采样频率
#define SIZE    16   //量化位数
#define CHANNELS 1   //声道数目
#define RSIZE    80    //buf的大小，



int main(void)
{
    int fd_dev_r;
    int fd_dev_w;
    int fd_f;
    int arg;
    int status;
       char choice;
       int i;
    unsigned char buf[RSIZE]; //每次循环取得RSIZE大小的容量，放入buf，然后写入文件；


    //打开声卡设备，只读方式；并对声卡进行设置
    fd_dev_r= open("/dev/dsp", O_RDONLY,0777);
    if (fd_dev_r < 0)
    {
       perror("Cannot open /dev/dsp device");
       return 1;
    }
    arg = SIZE;
       status = ioctl(fd_dev_r, SOUND_PCM_WRITE_BITS, &arg);//设置量化位数
    if (status == -1)
    {
           perror("Cannot set SOUND_PCM_WRITE_BITS ");
           return 1;
    }
    arg = CHANNELS;
    status = ioctl(fd_dev_r, SOUND_PCM_WRITE_CHANNELS, &arg);//设置声道数
    if (status == -1)
       {
           perror("Cannot set SOUND_PCM_WRITE_CHANNELS");
           return 1;
       }
    arg = RATE;
    status = ioctl(fd_dev_r, SOUND_PCM_WRITE_RATE, &arg);//设置采样率
    if (status == -1)
    {
           perror("Cannot set SOUND_PCM_WRITE_WRITE");
           return 1;
    }
    //打开声卡设备，只写方式；并对声卡进行设置
    fd_dev_w = open("/dev/dsp", O_WRONLY,0777);