在JDK中没有太多的对synchronzied的解析,主要是同步作用。下面通过jvm的中synchronizer.cpp的源码来分析
在这里可以下载jvm源码:http://hg.openjdk.java.net/
synchronzier.cpp的目录在:hotspot-9646293b9637\src\share\vm\runtime
synchronized同步底层使用JNI调用ObjectMonitor来时实现线程的wait(),notify(),notifyAll()等等.
看下面hotspot源码(使用c++写的)大致看一下就可以了。
wait()
// NOTE: must use heavy weight monitor to handle wait()
void ObjectSynchronizer::wait(Handle obj, jlong millis, TRAPS) {
if (UseBiasedLocking) {
BiasedLocking::revoke_and_rebias(obj, false, THREAD);
assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
}
if (millis < 0) {//时间小于0会抛出异常
TEVENT (wait - throw IAX) ;
THROW_MSG(vmSymbols::java_lang_IllegalArgumentException(), "timeout value is negative");
}
ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
DTRACE_MONITOR_WAIT_PROBE(monitor, obj(), THREAD, millis);
//调用了ObjectMonitor中的wait
monitor->wait(millis, true, THREAD);
/* This dummy call is in place to get around dtrace bug 6254741. Once
that's fixed we can uncomment the following line and remove the call */
// DTRACE_MONITOR_PROBE(waited, monitor, obj(), THREAD);
dtrace_waited_probe(monitor, obj, THREAD);
}</span>
// Note: a subset of changes to ObjectMonitor::wait()
// will need to be replicated in complete_exit above
void ObjectMonitor::wait(jlong millis, bool interruptible, TRAPS) {
Thread * const Self = THREAD ;
assert(Self->is_Java_thread(), "Must be Java thread!");
JavaThread *jt = (JavaThread *)THREAD;
DeferredInitialize () ;
// Throw IMSX or IEX.
CHECK_OWNER();
// check for a pending interrupt 是否有中断信号
if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
// post monitor waited event. Note that this is past-tense, we are done waiting.
if (JvmtiExport::should_post_monitor_waited()) {
// Note: 'false' parameter is passed here because the
// wait was not timed out due to thread interrupt.
JvmtiExport::post_monitor_waited(jt, this, false);
}
TEVENT (Wait - Throw IEX) ;
THROW(vmSymbols::java_lang_InterruptedException());
return ;
}
TEVENT (Wait) ;
assert (Self->_Stalled == 0, "invariant") ;
Self->_Stalled = intptr_t(this) ;
//设置线程的监视锁
jt->set_current_waiting_monitor(this);
// create a node to be put into the queue
// Critically, after we reset() the event but prior to park(), we must check
// for a pending interrupt.
//添加一个节点放入到等待队列中
ObjectWaiter node(Self);
node.TState = ObjectWaiter::TS_WAIT ;
Self->_ParkEvent->reset() ;
OrderAccess::fence(); // ST into Event; membar ; LD interrupted-flag
// Enter the waiting queue, which is a circular doubly linked list in this case
// but it could be a priority queue or any data structure.
// _WaitSetLock protects the wait queue. Normally the wait queue is accessed only
// by the the owner of the monitor *except* in the case where park()
// returns because of a timeout of interrupt. Contention is exceptionally rare
// so we use a simple spin-lock instead of a heavier-weight blocking lock.
//添加元素c++使用同步的方式,获取锁
Thread::SpinAcquire (&_WaitSetLock, "WaitSet - add") ;
//添加节点
AddWaiter (&node) ;
//释放锁
Thread::SpinRelease (&_WaitSetLock) ;
if ((SyncFlags & 4) == 0) {
_Responsible = NULL ;
}
intptr_t save = _recursions; // record the old recursion count
//增加等待线程数
_waiters++; // increment the number of waiters
_recursions = 0; // set the recursion level to be 1
exit (Self) ; // exit the monitor
guarantee (_owner != Self, "invariant") ;
// As soon as the ObjectMonitor's ownership is dropped in the exit()
// call above, another thread can enter() the ObjectMonitor, do the
// notify(), and exit() the ObjectMonitor. If the other thread's
// exit() call chooses this thread as the successor and the unpark()
// call happens to occur while this thread is posting a
// MONITOR_CONTENDED_EXIT event, then we run the risk of the event
// handler using RawMonitors and consuming the unpark().
//
// To avoid the problem, we re-post the event. This does no harm
// even if the original unpark() was not consumed because we are the
// chosen successor for this monitor.
if (node._notified != 0 && _succ == Self) {
node._event->unpark();
}
// The thread is on the WaitSet list - now park() it.
// On MP systems it's conceivable that a brief spin before we park
// could be profitable.
//
// TODO-FIXME: change the following logic to a loop of the form
// while (!timeout && !interrupted && _notified == 0) park()
int ret = OS_OK ;
int WasNotified = 0 ;
{ // State transition wrappers
OSThread* osthread = Self->osthread();
OSThreadWaitState osts(osthread, true);
{
ThreadBlockInVM tbivm(jt);
// Thread is in thread_blocked state and oop access is unsafe.
jt->set_suspend_equivalent();
if (interruptible && (Thread::is_interrupted(THREAD, false) || HAS_PENDING_EXCEPTION)) {
// Intentionally empty
} else
if (node._notified == 0) {
if (millis <= 0) {
Self->_ParkEvent->park () ;
} else {
ret = Self->_ParkEvent->park (millis) ;
}
}
// were we externally suspended while we were waiting?
if (ExitSuspendEquivalent (jt)) {
// TODO-FIXME: add -- if succ == Self then succ = null.
jt->java_suspend_self();
}
} // Exit thread safepoint: transition _thread_blocked -> _thread_in_vm
// Node may be on the WaitSet, the EntryList (or cxq), or in transition
// from the WaitSet to the EntryList.
// See if we need to remove Node from the WaitSet.
// We use double-checked locking to avoid grabbing _WaitSetLock
// if the thread is not on the wait queue.
//
// Note that we don't need a fence before the fetch of TState.
// In the worst case we'll fetch a old-stale value of TS_WAIT previously
// written by the is thread. (perhaps the fetch might even be satisfied
// by a look-aside into the processor's own store buffer, although given
// the length of the code path between the prior ST and this load that's
// highly unlikely). If the following LD fetches a stale TS_WAIT value
// then we'll acquire the lock and then re-fetch a fresh TState value.
// That is, we fail toward safety.
if (node.TState == ObjectWaiter::TS_WAIT) {
Thread::SpinAcquire (&_WaitSetLock, "WaitSet - unlink") ;
if (node.TState == ObjectWaiter::TS_WAIT) {
DequeueSpecificWaiter (&node) ; // unlink from WaitSet
assert(node._notified == 0, "invariant");
node.TState = ObjectWaiter::TS_RUN ;
}
Thread::SpinRelease (&_WaitSetLock) ;
}
// The thread is now either on off-list (TS_RUN),
// on the EntryList (TS_ENTER), or on the cxq (TS_CXQ).
// The Node's TState variable is stable from the perspective of this thread.
// No other threads will asynchronously modify TState.
guarantee (node.TState != ObjectWaiter::TS_WAIT, "invariant") ;
OrderAccess::loadload() ;
if (_succ == Self) _succ = NULL ;
WasNotified = node._notified ;
// Reentry phase -- reacquire the monitor.
// re-enter contended monitor after object.wait().
// retain OBJECT_WAIT state until re-enter successfully completes
// Thread state is thread_in_vm and oop access is again safe,
// although the raw address of the object may have changed.
// (Don't cache naked oops over safepoints, of course).
// post monitor waited event. Note that this is past-tense, we are done waiting.
if (JvmtiExport::should_post_monitor_waited()) {
JvmtiExport::post_monitor_waited(jt, this, ret == OS_TIMEOUT);
}
OrderAccess::fence() ;
assert (Self->_Stalled != 0, "invariant") ;
Self->_Stalled = 0 ;
assert (_owner != Self, "invariant") ;
ObjectWaiter::TStates v = node.TState ;
if (v == ObjectWaiter::TS_RUN) {
enter (Self) ;
} else {
guarantee (v == ObjectWaiter::TS_ENTER || v == ObjectWaiter::TS_CXQ, "invariant") ;
ReenterI (Self, &node) ;
node.wait_reenter_end(this);
}
// Self has reacquired the lock.
// Lifecycle - the node representing Self must not appear on any queues.
// Node is about to go out-of-scope, but even if it were immortal we wouldn't
// want residual elements associated with this thread left on any lists.
guarantee (node.TState == ObjectWaiter::TS_RUN, "invariant") ;
assert (_owner == Self, "invariant") ;
assert (_succ != Self , "invariant") ;
} // OSThreadWaitState()
jt->set_current_waiting_monitor(NULL);
guarantee (_recursions == 0, "invariant") ;
_recursions = save; // restore the old recursion count
_waiters--; // decrement the number of waiters
// Verify a few postconditions
assert (_owner == Self , "invariant") ;
assert (_succ != Self , "invariant") ;
assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
if (SyncFlags & 32) {
OrderAccess::fence() ;
}
// check if the notification happened
if (!WasNotified) {
// no, it could be timeout or Thread.interrupt() or both
// check for interrupt event, otherwise it is timeout
if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
TEVENT (Wait - throw IEX from epilog) ;
THROW(vmSymbols::java_lang_InterruptedException());
}
}
// NOTE: Spurious wake up will be consider as timeout.
// Monitor notify has precedence over thread interrupt.
}</span>
void ObjectMonitor::notify(TRAPS) {
CHECK_OWNER();
if (_WaitSet == NULL) {
TEVENT (Empty-Notify) ;
return ;
}
DTRACE_MONITOR_PROBE(notify, this, object(), THREAD);
int Policy = Knob_MoveNotifyee ;
Thread::SpinAcquire (&_WaitSetLock, "WaitSet - notify") ;
ObjectWaiter * iterator = DequeueWaiter() ;
// ...
//省略中间代码
//...
ParkEvent * ev = iterator->_event ;
//设置状态
iterator->TState = ObjectWaiter::TS_RUN ;
OrderAccess::fence() ;
//释放锁
ev->unpark() ;
}
if (Policy < 4) {
iterator->wait_reenter_begin(this);
}
}</span>
还有notifyAll(),SimpleEnter(),SimpeExit(),可以看具体的代码。