qemu arm linux mmc0: host doesn't support card's voltages 问题

该问题出现在引导linux内核出现mmc 检测失败。

解决方法：

在vexpress_defconfig 中添加

CONFIG_REGULATOR=y

CONFIG_REGULATOR_VEXPRESS=y

在内核配置中

General setup --->
[*] open by fhandle syscalls

Device Drivers  --->
  Generic Driver Options  --->
    [*] Maintain a devtmpfs filesystem to mount at /dev
    [*]   Automount devtmpfs at /dev, after the kernel mounted the rootfs

Device Drivers ---> Network device support ---> Ethernet driver support --->
[*]   SMC (SMSC)/Western Digital devices
<M>     SMC 91C9x/91C1xxx support
< >     SMSC LAN911[5678] support
<M>     SMSC LAN911x/LAN921x families embedded ethernet support

qemu arm 环境搭建