Texas Instruments X-Loader 1.41 (Oct 21 2011 - 09:28:33)
OMAP4460: 1.2 GHz capable SOM
Starting OS Bootloader from MMC/SD1 ...
U-Boot 1.1.4-gedeced79 (Feb 6 2012 - 09:27:11)
Load address: 0x80e80000
DRAM: 1024 MB
Flash: 0 kB
Using default environment
In: serial
Out: serial
Err: serial
efi partition table:
256 128K xloader
512 256K bootloader
2048 8M recovery
18432 8M boot
34816 512M system
1083392 256M cache
1607680 6879M userdata
Net: KS8851SNL
Hit any key to stop autoboot: 0
kernel @ 80008000 (3665828)
ramdisk @ 81000000 (170470)
I2C read: I/O error
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8-g52f4764 (jbq@jqueru.mtv.corp.google.com) (g2
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region.
[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000
[ 0.000000] On node 0 totalpages: 190208
[ 0.000000] free_area_init_node: node 0, pgdat c0751120, node_mem_map c08d100
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 188672 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0edb000 s6912 r8192 d13568 u32768
[ 0.000000] pcpu-alloc: s6912 r8192 d13568 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
[ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G androidboot.c9
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 512MB 231MB = 743MB total
[ 0.000000] Memory: 744604k/744604k available, 41828k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0046000 ( 248 kB)
[ 0.000000] .text : 0xc0046000 - 0xc06f2000 (6832 kB)
[ 0.000000] .data : 0xc06f2000 - 0xc0751900 ( 383 kB)
[ 0.000000] .bss : 0xc0751924 - 0xc08d05a8 (1532 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, 1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 1s
[ 0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[ 0.070404] pid_max: default: 32768 minimum: 301
[ 0.070404] Mount-cache hash table entries: 512
[ 0.070404] Initializing cgroup subsys debug
[ 0.071777] Initializing cgroup subsys cpuacct
[ 0.071777] Initializing cgroup subsys freezer
[ 0.071777] CPU: Testing write buffer coherency: ok
[ 0.072052] L310 cache controller enabled
[ 0.072052] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache sB
[ 0.150329] CPU1: Booted secondary processor
[ 0.181579] Brought up 2 CPUs
[ 0.181640] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
[ 0.181915] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[ 0.185852] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_insr
[ 0.185852] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_mai1
[ 0.185882] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_mai2
[ 0.185882] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[ 0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[ 0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_pre
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermar
[ 0.186096] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_i
[ 0.186096] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_i
[ 0.186096] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.187194] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[ 0.194915] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.197265] print_constraints: dummy:
[ 0.197265] NET: Registered protocol family 16
[ 0.197265] GPMC revision 6.0
[ 0.197265] EMIF0 is enabled with IRQ142
[ 0.199707] EMIF1 is enabled with IRQ143
[ 0.199737] Last reset was cold reset (PRM_RSTST=0x1)
[ 0.199737]
[ 0.199920] HSI: device registered as omap_hwmod: hsi
[ 0.200439] OMAP GPIO hardware version 0.1
[ 0.202697] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.204040] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.204040] ram_console: got buffer at a0000000, size 200000
[ 0.204040] ram_console: found existing buffer, size 27414, start 27414
[ 0.288665] console [ram-1] enabled
[ 0.290008] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
[ 0.290008] omap_hwmod_mux_init: Could not allocate device mux entry
[ 0.302734] OMAP DMA hardware revision 0.0
[ 0.311462] bio: create slab <bio-0> at 0
[ 0.312164] print_constraints: vwl1271: 1800 mV
[ 0.312683] SCSI subsystem initialized
[ 0.312683] usbcore: registered new interface driver usbfs
[ 0.314117] usbcore: registered new interface driver hub
[ 0.314453] usbcore: registered new device driver usb
[ 0.330078] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[ 0.330932] Skipping twl internal clock init and using bootloader value (unk)
[ 0.331481] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.333496] print_constraints: VUSB: 3300 mV normal standby
[ 0.536376] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.537200] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal stay
[ 0.537780] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal stany
[ 0.537780] print_constraints: VCXIO: 1800 mV normal standby
[ 0.537780] print_constraints: VDAC: 1800 mV normal standby
[ 0.539550] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normy
[ 0.540252] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normy
[ 0.541229] print_constraints: CLK32KG:
[ 0.541870] print_constraints: VANA: 2100 mV normal standby
[ 0.556640] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[ 0.572265] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[ 0.587890] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[ 0.587890] omap-rproc omap-rproc.0: dsp is available
[ 0.587890] omap-rproc omap-rproc.1: ipu is available
[ 0.587890] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.587890] Bluetooth: Core ver 2.16
[ 0.590270] NET: Registered protocol family 31
[ 0.590270] Bluetooth: HCI device and connection manager initialized
[ 0.590576] Bluetooth: HCI socket layer initialized
[ 0.590576] Bluetooth: L2CAP socket layer initialized
[ 0.590576] Bluetooth: SCO socket layer initialized
[ 0.591552] cfg80211: Calling CRDA to update world regulatory domain
[ 0.591827] Switching to clocksource 32k_counter
[ 0.595062] musb-hdrc: version 6.0, musb-dma, peripheral
[ 0.595489] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bul)
[ 0.595672] Switched to NOHz mode on CPU #1
[ 0.595703] Switched to NOHz mode on CPU #0
[ 0.596130] musb-hdrc: MHDRC RTL version 2.0
[ 0.596252] musb-hdrc: setup fifo_mode 4
[ 0.596252] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.596252] musb-hdrc musb-hdrc: USB Peripheral mode controller at fc0ab000 4
[ 0.597137] NET: Registered protocol family 2
[ 0.597137] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.597137] TCP established hash table entries: 131072 (order: 8, 1048576 by)
[ 0.600860] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
[ 0.600860] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.600860] TCP reno registered
[ 0.605133] UDP hash table entries: 512 (order: 3, 32768 bytes)
[ 0.605255] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[ 0.605438] NET: Registered protocol family 1
[ 0.605438] Trying to unpack rootfs image as initramfs...
[ 0.620635] Freeing initrd memory: 164K
[ 1.710235] omap-iommu omap-iommu.0: ducati registered
[ 1.711914] omap-iommu omap-iommu.1: tesla registered
[ 1.720916] ashmem: initialized
[ 1.727325] fuse init (API version 7.16)
[ 1.727325] msgmni has been set to 1454
[ 1.732604] io scheduler noop registered
[ 1.732666] io scheduler deadline registered
[ 1.733032] io scheduler cfq registered (default)
[ 1.733032] start plist test
[ 1.737121] end plist test
[ 1.745300] OMAP DSS rev 4.0
[ 1.753631] dsscomp: initializing.
[ 1.753631] misc dsscomp: display0=generic_dpi_panel
[ 1.753631] misc dsscomp: display1=hdmi_panel
[ 1.754608] misc dsscomp: found 2 displays and 4 overlays
[ 1.755004] could not allocate slot
[ 1.755493] omap-rproc omap-rproc.1: powering up ipu
[ 1.756011] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfy
[ 1.756011] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfy
[ 1.757141] rpmsg_virtio TX: 28 00 00 00 64 00 00 00 35 00 00 00 00 00 00 00.
[ 1.757141] rpmsg_virtio TX: 72 70 6d 73 67 2d 72 65 73 6d 67 72 00 00 00 00.
[ 1.757141] rpmsg_virtio TX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.
[ 1.757904] rpmsg_virtio TX: 64 00 00 00 00 00 00 00 .
[ 1.757904] rpmsg_virtio TX: 28 00 00 00 64 00 00 00 35 00 00 00 00 00 00 00.
[ 1.757904] rpmsg_virtio TX: 72 70 6d 73 67 2d 72 65 73 6d 67 72 00 00 00 00.
[ 1.758453] rpmsg_virtio TX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.
[ 1.758453] rpmsg_virtio TX: 64 00 00 00 00 00 00 00 .
[ 1.758453] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 1.780578] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 1.811157] in hpd work 1, state=0
[ 1.811157] omapdss HDMI: ENTER hdmi_display_enable
[ 1.811676] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.888458] in hpd work 2, state=1
[ 2.892242] console [ttyO2] enabled
[ 2.968109] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 3.108917] PVR: PVRCore_Init
[ 3.112670] PVR: PVRSRVDriverProbe(pDevice=ee4ade00)
[ 3.118377] PVR: SGX register base: 0x56000000
[ 3.123352] PVR: SGX register size: 65535
[ 3.127868] PVR: SGX IRQ: 53
[ 3.131164] PVR: EnableSystemClocks: Enabling System Clocks
[ 3.137420] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency ]
[ 3.150604] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency ]
[ 3.163726] PVR: PVRCore_Init: major device 251
[ 3.171173] brd: module loaded
[ 3.180877] loop: module loaded
[ 3.188720] (stk) :sysfs entries created
[ 3.188720] (stk) : debugfs entries created
[ 3.213012] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
[ 3.220733] edid[000] = 00 ff ff ff ff ff ff 00 30 64 80 c9 86 18 00 00
[ 3.228790] edid[010] = 30 14 01 03 80 26 1e 78 2a 6e 85 a2 5a 4d 94 24
[ 3.236297] edid[020] = 1a 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01
[ 3.243865] edid[030] = 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 3.251495] edid[040] = 13 00 78 2d 11 00 00 1e 00 00 00 ff 00 31 38 34
[ 3.258972] edid[050] = 41 42 48 41 30 30 36 32 37 38 00 00 00 fd 00 37
[ 3.266387] edid[060] = 4b 1e 53 0e 00 0a 20 20 20 20 20 20 00 00 00 fc
[ 3.273895] edid[070] = 00 4c 43 44 2d 4d 4f 4e 49 54 4f 52 0a 20 00 46
[ 3.281341] edid[080] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.288848] edid[090] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.296386] edid[0a0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.303955] edid[0b0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.311431] edid[0c0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.318908] edid[0d0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.327423] PPP generic driver version 2.4.2
[ 3.332885] PPP Deflate Compression module registered
[ 3.338806] edid[0e0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.346191] PPP BSD Compression module registered
[ 3.351562] edid[0f0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.359008] edid[100] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.366455] edid[110] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.373870] edid[120] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.381347] edid[130] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.388824] PPP MPPE Compression module registered
[ 3.394195] NET: Registered protocol family 24
[ 3.397735] edid[140] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397796] edid[150] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397827] edid[160] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397857] edid[170] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397857] edid[180] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397888] edid[190] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397888] edid[1a0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397918] edid[1b0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397949] edid[1c0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397949] edid[1d0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397979] edid[1e0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.398010] edid[1f0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.398010] panel size 38 by 30
[ 3.493682] usbcore: registered new interface driver asix
[ 3.499725] usbcore: registered new interface driver cdc_ether
[ 3.506469] usbcore: registered new interface driver smsc95xx
[ 3.513000] usbcore: registered new interface driver net1080
[ 3.519470] usbcore: registered new interface driver cdc_subset
[ 3.526123] usbcore: registered new interface driver zaurus
[ 3.532470] cdc_ncm: 04-Aug-2011
[ 3.536163] usbcore: registered new interface driver cdc_ncm
[ 3.542572] usbcore: registered new interface driver zd1201
[ 3.548950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.556518] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 3.562896] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
[ 3.571350] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 3.593078] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 3.599670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.607208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 3.615295] usb usb1: Product: OMAP-EHCI Host Controller
[ 3.621215] usb usb1: Manufacturer: Linux 3.0.8-g52f4764 ehci_hcd
[ 3.628082] usb usb1: SerialNumber: ehci-omap.0
[ 3.633209] hub 1-0:1.0: USB hub found
[ 3.633819] hub 1-0:1.0: 3 ports detected
[ 3.671173] usbcore: registered new interface driver cdc_acm
[ 3.677734] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
[ 3.686614] Initializing USB Mass Storage driver...
[ 3.692199] usbcore: registered new interface driver usb-storage
[ 3.698974] USB Mass Storage support registered.
[ 3.704406] usbcore: registered new interface driver usbserial
[ 3.710876] usbserial: USB Serial Driver core
[ 3.715789] USB Serial support registered for Keyspan - (without firmware)
[ 3.723541] USB Serial support registered for Keyspan 1 port adapter
[ 3.730743] USB Serial support registered for Keyspan 2 port adapter
[ 3.737854] USB Serial support registered for Keyspan 4 port adapter
[ 3.745208] usbcore: registered new interface driver keyspan
[ 3.751495] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[ 3.960052] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 3.967712] android_usb gadget: Number of LUNs=1
[ 3.972961] lun0: LUN: removable file: (no medium)
[ 3.978729] android_usb gadget: android_usb ready
[ 3.978729] mousedev: PS/2 mouse device common for all mice
[ 3.990631] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 3.992279] usb 1-1: new high speed USB device number 2 using ehci-omap
[ 4.006835] i2c /dev entries driver
[ 4.010864] lirc_dev: IR Remote Control driver registered, major 249
[ 4.018676] IR NEC protocol handler initialized
[ 4.023803] IR RC5(x) protocol handler initialized
[ 4.029083] IR RC6 protocol handler initialized
[ 4.034088] IR JVC protocol handler initialized
[ 4.039184] IR Sony protocol handler initialized
[ 4.044281] IR RC5 (streamzap) protocol handler initialized
[ 4.050537] IR LIRC bridge handler initialized
[ 4.055541] dmm: probe base: fd300000, irq 145
[ 4.061889] device-mapper: uevent: version 1.0.3
[ 4.068664] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-m
[ 4.078430] Bluetooth: HCI UART driver ver 2.2
[ 4.083404] Bluetooth: HCI H4 protocol initialized
[ 4.088775] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[ 4.097259] (stc): st_register(2)
[ 4.097381] cpuidle: using governor ladder
[ 4.097381] cpuidle: using governor menu
[ 4.101043] usbcore: registered new interface driver usbhid
[ 4.101593] usbhid: USB HID core driver
[ 4.120758] (stc): chnl_id list empty :2
[ 4.121124] logger: created 256K log 'log_main'
[ 4.121124] logger: created 256K log 'log_events'
[ 4.121124] logger: created 256K log 'log_radio'
[ 4.121124] logger: created 256K log 'log_system'
[ 4.121490] OMAP HSI: HSI DRIVER Version 0.4.1
[ 4.122741] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
[ 4.122863] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
[ 4.123016] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
[ 4.125549] SDP4430 SoC init
[ 4.173950] (stk) : st_kim_start
[ 4.202758] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 4.203643] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[ 4.206207] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[ 4.208099] asoc: null-codec-dai <-> Voice mapping ok
[ 4.209503] asoc: null-codec-dai <-> Tones mapping ok
[ 4.210906] asoc: null-codec-dai <-> Vibra mapping ok
[ 4.211791] asoc: null-codec-dai <-> MODEM mapping ok
[ 4.212463] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[ 4.213256] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 4.215759] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
[ 4.217895] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Steree
[ 4.218841] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 4.219696] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 4.220703] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 4.221405] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 4.222259] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 4.223388] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 4.224121] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 4.225067] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[ 4.228424] input: Panda Headset Jack as /devices/platform/soc-audio/sound/c1
[ 4.237091] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[ 4.237762] ALSA device list:
[ 4.237762] #0: TI OMAP4 Board
[ 4.237762] #1: OMAP4HDMI
[ 4.237915] GACT probability NOT on
[ 4.237945] Mirror/redirect action on
[ 4.237945] u32 classifier
[ 4.237945] Actions configured
[ 4.237976] Netfilter messages via NETLINK v0.30.
[ 4.237976] nf_conntrack version 0.5.0 (11637 buckets, 46548 max)
[ 4.237976] ctnetlink v0.93: registering with nfnetlink.
[ 4.239440] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.239440] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.239837] xt_time: kernel timezone is -0000
[ 4.239837] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.242767] arp_tables: (C) 2002 David S. Miller
[ 4.242767] TCP cubic registered
[ 4.243103] NET: Registered protocol family 10
[ 4.250640] Mobile IPv6
[ 4.250640] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.251159] IPv6 over IPv4 tunneling driver
[ 4.257476] NET: Registered protocol family 17
[ 4.258209] NET: Registered protocol family 15
[ 4.258361] Bluetooth: RFCOMM TTY layer initialized
[ 4.258361] Bluetooth: RFCOMM socket layer initialized
[ 4.258361] Bluetooth: RFCOMM ver 1.11
[ 4.258422] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.258422] NET: Registered protocol family 35
[ 4.258422] lib80211: common routines for IEEE802.11 drivers
[ 4.258941] lib80211_crypt: registered algorithm 'NULL'
[ 4.258941] VFP support v0.3:
[ 4.482055] android_work: did not send uevent (0 0 (null))
[ 4.488861] implementor 41 architecture 3 part 30 variant 9 rev 4
[ 4.495727] ThumbEE CPU extension supported.
[ 4.500549] Registering SWP/SWPB emulation handler
[ 4.513061] Reprogramming LPDDR2 timings to 400000000 Hz
[ 4.519653] Power Management for TI OMAP4.
[ 4.525512] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L.
[ 4.536163] sr_init: No PMIC hook to init smartreflex
[ 4.542022] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver inid
[ 4.551177] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver inid
[ 4.555664] (stk) :ldisc_install = 1
[ 4.555694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.572570] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver inid
[ 4.572570] hub 1-1:1.0: USB hub found
[ 4.585906] hub 1-1:1.0: 5 ports detected
[ 4.586029] sr_class1p5_driver_init: OMAP4460: add 10mV margin for class 1.5
[ 4.586547] SmartReflex class 1.5 driver: initialized (86400000ms)
[ 4.595367] clock: disabling unused clocks to save power
[ 4.597198] mmc0: host does not support reading read-only switch. assuming w.
[ 4.597259] mmc0: new SDHC card at address 0007
[ 4.601776] mmcblk0: mmc0:0007 SD8GB 7.48 GiB
[ 4.612915] Alternate GPT is invalid, using primary GPT.
[ 4.612915] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 4.658477] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 4.682647] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nomin0
[ 4.702636] sr_class1p5_calib_work: core: Calibration complete: Voltage Nomi0
[ 4.721862] android_work: did not send uevent (0 0 (null))
[ 4.738006] android_work: did not send uevent (0 0 (null))
[ 4.769134] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 4.784820] mmc1: card claims to support voltages below the defined range. T.
[ 4.804168] sr_class1p5_calib_work: core: Calibration complete: Voltage Nomi0
[ 4.829376] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 4.837036] mmc1: new SDIO card at address 0001
[ 4.905029] android_work: sent uevent USB_STATE=CONNECTED
[ 4.941955] usb 1-1.1: new high speed USB device number 3 using ehci-omap
[ 4.949737] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4.987640] android_work: sent uevent USB_STATE=CONNECTED
[ 4.994110] android_work: sent uevent USB_STATE=DISCONNECTED
[ 5.069763] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=102501
[ 5.079681] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 5.090209] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 5.097961] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumbe0
[ 5.108459] smsc95xx v1.0.4
[ 5.127258] cannot apply mgr(lcd) on inactive device
[ 5.133087] omapfb omapfb: failed to apply dispc config
[ 5.138854] cannot apply mgr(lcd2) on inactive device
[ 5.144836] omapfb omapfb: failed to apply dispc config
[ 5.150665] omapdss DPI: Could not find exact pixel clock. Requested 74250 kz
[ 5.162506] android_work: sent uevent USB_STATE=CONNECTED
[ 5.168792] regulator_init_complete: VANA: incomplete constraints, leaving on
[ 5.178375] regulator_init_complete: VCXIO: incomplete constraints, leaving n
[ 5.187744] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 5.196197] Freeing init memory: 248K
[ 5.206848] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_.
[ 5.218872] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 5.233703] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0b
[ 5.344299] keychord: using input dev gpio-keys for fevent
[ 5.344482] usb 1-1.3: new full speed USB device number 4 using ehci-omap
[ 5.463348] usb 1-1.3: New USB device found, idVendor=10c4, idProduct=ea60
[ 5.472930] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumbe3
[ 5.481750] usb 1-1.3: Product: CP2102 USB to UART Bridge Controller
[ 5.489013] usb 1-1.3: Manufacturer: Silicon Labs
[ 5.495269] usb 1-1.3: SerialNumber: 0001
[ 5.513793] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. )
[ 5.710327] (stk) :ldisc installation timeout
[ 5.710998] (stk) :ldisc_install = 0
[ 6.214538] EXT4-fs (mmcblk0p6): recovery complete
[ 6.240020] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. c
[ 6.285980] wl1271: loaded
[ 6.289459] wl1271: initialized
[ 6.881439] (stk) : timed out waiting for ldisc to be un-installed
[ 6.975860] (stk) :ldisc_install = 1
[ 8.135375] (stk) :ldisc installation timeout
[ 8.140930] (stk) :ldisc_install = 0
[ 8.614105] EXT4-fs (mmcblk0p7): recovery complete
[ 8.632232] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. c
[ 8.700073] init: cannot find '/vendor/bin/pvrsrvinit', disabling 'pvrsrvini'
[ 8.712371] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 8.727996] init: cannot find '/system/etc/install-recovery.sh', disabling ''
[ 8.741882] android_usb: already disabled
[ 8.745605] adb_bind_config
[ 8.751068] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducatn
[ 8.753448] adb_bind_config
[ 8.755798] warning: `adbd' uses 32-bit capabilities (legacy support in use)
[ 8.755798] adb_open
[ 8.919067] android_work: sent uevent USB_STATE=DISCONNECTED
[ 8.959564] android_work: sent uevent USB_STATE=CONNECTED
[ 8.969177] android_work: sent uevent USB_STATE=DISCONNECTED
[ 9.043975] android_work: sent uevent USB_STATE=CONNECTED
shell@android:/ $ [ 9.296630] (stk) : timed out waiting for ldisc to be un-id
[ 9.416961] (stk) :ldisc_install = 1
[ 9.466003] android_usb gadget: high speed config #1: android
[ 9.473388] android_work: sent uevent USB_STATE=CONFIGURED
[ 9.473876] (stc): st_tty_open
[ 9.473907] (stk) :line discipline installed
[ 9.489288] (stk) :TIInit_7.6.15.bts
[ 9.810668] (stc): add_channel_to_table: id 2
[ 9.816253] (stc): st_register(3)
[ 9.820220] (stc): add_channel_to_table: id 3
[ 9.825653] (stc): st_register(4)
[ 9.829803] (stc): add_channel_to_table: id 4
[ 11.704315] init: untracked pid 100 exited
[ 11.886047] (stc): remove_channel_from_table: id 2
[ 11.891662] (stc): remove_channel_from_table: id 3
[ 11.897033] (stc): remove_channel_from_table: id 4
[ 11.903625] (stc): all chnl_ids unregistered
[ 11.908966] (stk) :ldisc_install = 0
[ 11.914276] (stc): st_tty_close
[ 11.914367] (stc): 2 not un-registered
[ 11.921936] (stc): 3 not un-registered
[ 11.921936] (stc): 4 not un-registered
[ 14.973175] init: untracked pid 251 exited
[ 19.399017] init: untracked pid 257 exited
[ 23.839874] init: untracked pid 263 exited
shell@android:/ $ [ 27.615844] alarm_set_rtc: no RTC, time will be lost on ret
[ 29.369384] init: untracked pid 269 exited
[ 29.386932] init: untracked pid 274 exited
shell@android:/ $
shell@android:/ $
shell@android:/ $ [ 33.925323] init: untracked pid 293 exited
[ 35.168609] init: untracked pid 300 exited
[ 38.606719] init: untracked pid 319 exited
[ 38.674835] init: untracked pid 323 exited
谁能帮我解决这个问题?以上是全部启动信息;
OMAP4460: 1.2 GHz capable SOM
Starting OS Bootloader from MMC/SD1 ...
U-Boot 1.1.4-gedeced79 (Feb 6 2012 - 09:27:11)
Load address: 0x80e80000
DRAM: 1024 MB
Flash: 0 kB
Using default environment
In: serial
Out: serial
Err: serial
efi partition table:
256 128K xloader
512 256K bootloader
2048 8M recovery
18432 8M boot
34816 512M system
1083392 256M cache
1607680 6879M userdata
Net: KS8851SNL
Hit any key to stop autoboot: 0
kernel @ 80008000 (3665828)
ramdisk @ 81000000 (170470)
I2C read: I/O error
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8-g52f4764 (jbq@jqueru.mtv.corp.google.com) (g2
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region.
[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000
[ 0.000000] On node 0 totalpages: 190208
[ 0.000000] free_area_init_node: node 0, pgdat c0751120, node_mem_map c08d100
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 188672 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0edb000 s6912 r8192 d13568 u32768
[ 0.000000] pcpu-alloc: s6912 r8192 d13568 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
[ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G androidboot.c9
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 512MB 231MB = 743MB total
[ 0.000000] Memory: 744604k/744604k available, 41828k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0046000 ( 248 kB)
[ 0.000000] .text : 0xc0046000 - 0xc06f2000 (6832 kB)
[ 0.000000] .data : 0xc06f2000 - 0xc0751900 ( 383 kB)
[ 0.000000] .bss : 0xc0751924 - 0xc08d05a8 (1532 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, 1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 1s
[ 0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[ 0.070404] pid_max: default: 32768 minimum: 301
[ 0.070404] Mount-cache hash table entries: 512
[ 0.070404] Initializing cgroup subsys debug
[ 0.071777] Initializing cgroup subsys cpuacct
[ 0.071777] Initializing cgroup subsys freezer
[ 0.071777] CPU: Testing write buffer coherency: ok
[ 0.072052] L310 cache controller enabled
[ 0.072052] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache sB
[ 0.150329] CPU1: Booted secondary processor
[ 0.181579] Brought up 2 CPUs
[ 0.181640] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
[ 0.181915] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[ 0.185852] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_insr
[ 0.185852] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_mai1
[ 0.185882] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_mai2
[ 0.185882] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[ 0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[ 0.185913] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_pre
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
[ 0.185943] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermar
[ 0.186096] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_i
[ 0.186096] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_i
[ 0.186096] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.187194] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[ 0.194915] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.197265] print_constraints: dummy:
[ 0.197265] NET: Registered protocol family 16
[ 0.197265] GPMC revision 6.0
[ 0.197265] EMIF0 is enabled with IRQ142
[ 0.199707] EMIF1 is enabled with IRQ143
[ 0.199737] Last reset was cold reset (PRM_RSTST=0x1)
[ 0.199737]
[ 0.199920] HSI: device registered as omap_hwmod: hsi
[ 0.200439] OMAP GPIO hardware version 0.1
[ 0.202697] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.204040] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.204040] ram_console: got buffer at a0000000, size 200000
[ 0.204040] ram_console: found existing buffer, size 27414, start 27414
[ 0.288665] console [ram-1] enabled
[ 0.290008] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
[ 0.290008] omap_hwmod_mux_init: Could not allocate device mux entry
[ 0.302734] OMAP DMA hardware revision 0.0
[ 0.311462] bio: create slab <bio-0> at 0
[ 0.312164] print_constraints: vwl1271: 1800 mV
[ 0.312683] SCSI subsystem initialized
[ 0.312683] usbcore: registered new interface driver usbfs
[ 0.314117] usbcore: registered new interface driver hub
[ 0.314453] usbcore: registered new device driver usb
[ 0.330078] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[ 0.330932] Skipping twl internal clock init and using bootloader value (unk)
[ 0.331481] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.333496] print_constraints: VUSB: 3300 mV normal standby
[ 0.536376] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.537200] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal stay
[ 0.537780] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal stany
[ 0.537780] print_constraints: VCXIO: 1800 mV normal standby
[ 0.537780] print_constraints: VDAC: 1800 mV normal standby
[ 0.539550] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normy
[ 0.540252] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normy
[ 0.541229] print_constraints: CLK32KG:
[ 0.541870] print_constraints: VANA: 2100 mV normal standby
[ 0.556640] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[ 0.572265] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[ 0.587890] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[ 0.587890] omap-rproc omap-rproc.0: dsp is available
[ 0.587890] omap-rproc omap-rproc.1: ipu is available
[ 0.587890] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.587890] Bluetooth: Core ver 2.16
[ 0.590270] NET: Registered protocol family 31
[ 0.590270] Bluetooth: HCI device and connection manager initialized
[ 0.590576] Bluetooth: HCI socket layer initialized
[ 0.590576] Bluetooth: L2CAP socket layer initialized
[ 0.590576] Bluetooth: SCO socket layer initialized
[ 0.591552] cfg80211: Calling CRDA to update world regulatory domain
[ 0.591827] Switching to clocksource 32k_counter
[ 0.595062] musb-hdrc: version 6.0, musb-dma, peripheral
[ 0.595489] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bul)
[ 0.595672] Switched to NOHz mode on CPU #1
[ 0.595703] Switched to NOHz mode on CPU #0
[ 0.596130] musb-hdrc: MHDRC RTL version 2.0
[ 0.596252] musb-hdrc: setup fifo_mode 4
[ 0.596252] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.596252] musb-hdrc musb-hdrc: USB Peripheral mode controller at fc0ab000 4
[ 0.597137] NET: Registered protocol family 2
[ 0.597137] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.597137] TCP established hash table entries: 131072 (order: 8, 1048576 by)
[ 0.600860] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
[ 0.600860] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.600860] TCP reno registered
[ 0.605133] UDP hash table entries: 512 (order: 3, 32768 bytes)
[ 0.605255] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[ 0.605438] NET: Registered protocol family 1
[ 0.605438] Trying to unpack rootfs image as initramfs...
[ 0.620635] Freeing initrd memory: 164K
[ 1.710235] omap-iommu omap-iommu.0: ducati registered
[ 1.711914] omap-iommu omap-iommu.1: tesla registered
[ 1.720916] ashmem: initialized
[ 1.727325] fuse init (API version 7.16)
[ 1.727325] msgmni has been set to 1454
[ 1.732604] io scheduler noop registered
[ 1.732666] io scheduler deadline registered
[ 1.733032] io scheduler cfq registered (default)
[ 1.733032] start plist test
[ 1.737121] end plist test
[ 1.745300] OMAP DSS rev 4.0
[ 1.753631] dsscomp: initializing.
[ 1.753631] misc dsscomp: display0=generic_dpi_panel
[ 1.753631] misc dsscomp: display1=hdmi_panel
[ 1.754608] misc dsscomp: found 2 displays and 4 overlays
[ 1.755004] could not allocate slot
[ 1.755493] omap-rproc omap-rproc.1: powering up ipu
[ 1.756011] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfy
[ 1.756011] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfy
[ 1.757141] rpmsg_virtio TX: 28 00 00 00 64 00 00 00 35 00 00 00 00 00 00 00.
[ 1.757141] rpmsg_virtio TX: 72 70 6d 73 67 2d 72 65 73 6d 67 72 00 00 00 00.
[ 1.757141] rpmsg_virtio TX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.
[ 1.757904] rpmsg_virtio TX: 64 00 00 00 00 00 00 00 .
[ 1.757904] rpmsg_virtio TX: 28 00 00 00 64 00 00 00 35 00 00 00 00 00 00 00.
[ 1.757904] rpmsg_virtio TX: 72 70 6d 73 67 2d 72 65 73 6d 67 72 00 00 00 00.
[ 1.758453] rpmsg_virtio TX: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.
[ 1.758453] rpmsg_virtio TX: 64 00 00 00 00 00 00 00 .
[ 1.758453] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 1.780578] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 1.811157] in hpd work 1, state=0
[ 1.811157] omapdss HDMI: ENTER hdmi_display_enable
[ 1.811676] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.888458] in hpd work 2, state=1
[ 2.892242] console [ttyO2] enabled
[ 2.968109] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 3.108917] PVR: PVRCore_Init
[ 3.112670] PVR: PVRSRVDriverProbe(pDevice=ee4ade00)
[ 3.118377] PVR: SGX register base: 0x56000000
[ 3.123352] PVR: SGX register size: 65535
[ 3.127868] PVR: SGX IRQ: 53
[ 3.131164] PVR: EnableSystemClocks: Enabling System Clocks
[ 3.137420] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency ]
[ 3.150604] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency ]
[ 3.163726] PVR: PVRCore_Init: major device 251
[ 3.171173] brd: module loaded
[ 3.180877] loop: module loaded
[ 3.188720] (stk) :sysfs entries created
[ 3.188720] (stk) : debugfs entries created
[ 3.213012] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
[ 3.220733] edid[000] = 00 ff ff ff ff ff ff 00 30 64 80 c9 86 18 00 00
[ 3.228790] edid[010] = 30 14 01 03 80 26 1e 78 2a 6e 85 a2 5a 4d 94 24
[ 3.236297] edid[020] = 1a 4f 54 bf ef 00 81 80 01 01 01 01 01 01 01 01
[ 3.243865] edid[030] = 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 3.251495] edid[040] = 13 00 78 2d 11 00 00 1e 00 00 00 ff 00 31 38 34
[ 3.258972] edid[050] = 41 42 48 41 30 30 36 32 37 38 00 00 00 fd 00 37
[ 3.266387] edid[060] = 4b 1e 53 0e 00 0a 20 20 20 20 20 20 00 00 00 fc
[ 3.273895] edid[070] = 00 4c 43 44 2d 4d 4f 4e 49 54 4f 52 0a 20 00 46
[ 3.281341] edid[080] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.288848] edid[090] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.296386] edid[0a0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.303955] edid[0b0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.311431] edid[0c0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.318908] edid[0d0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.327423] PPP generic driver version 2.4.2
[ 3.332885] PPP Deflate Compression module registered
[ 3.338806] edid[0e0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.346191] PPP BSD Compression module registered
[ 3.351562] edid[0f0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.359008] edid[100] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.366455] edid[110] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.373870] edid[120] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.381347] edid[130] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.388824] PPP MPPE Compression module registered
[ 3.394195] NET: Registered protocol family 24
[ 3.397735] edid[140] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397796] edid[150] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397827] edid[160] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397857] edid[170] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397857] edid[180] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397888] edid[190] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397888] edid[1a0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397918] edid[1b0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397949] edid[1c0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397949] edid[1d0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.397979] edid[1e0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.398010] edid[1f0] = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.398010] panel size 38 by 30
[ 3.493682] usbcore: registered new interface driver asix
[ 3.499725] usbcore: registered new interface driver cdc_ether
[ 3.506469] usbcore: registered new interface driver smsc95xx
[ 3.513000] usbcore: registered new interface driver net1080
[ 3.519470] usbcore: registered new interface driver cdc_subset
[ 3.526123] usbcore: registered new interface driver zaurus
[ 3.532470] cdc_ncm: 04-Aug-2011
[ 3.536163] usbcore: registered new interface driver cdc_ncm
[ 3.542572] usbcore: registered new interface driver zd1201
[ 3.548950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.556518] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 3.562896] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
[ 3.571350] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 3.593078] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 3.599670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.607208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 3.615295] usb usb1: Product: OMAP-EHCI Host Controller
[ 3.621215] usb usb1: Manufacturer: Linux 3.0.8-g52f4764 ehci_hcd
[ 3.628082] usb usb1: SerialNumber: ehci-omap.0
[ 3.633209] hub 1-0:1.0: USB hub found
[ 3.633819] hub 1-0:1.0: 3 ports detected
[ 3.671173] usbcore: registered new interface driver cdc_acm
[ 3.677734] cdc_acm: USB Abstract Control Model driver for USB modems and ISs
[ 3.686614] Initializing USB Mass Storage driver...
[ 3.692199] usbcore: registered new interface driver usb-storage
[ 3.698974] USB Mass Storage support registered.
[ 3.704406] usbcore: registered new interface driver usbserial
[ 3.710876] usbserial: USB Serial Driver core
[ 3.715789] USB Serial support registered for Keyspan - (without firmware)
[ 3.723541] USB Serial support registered for Keyspan 1 port adapter
[ 3.730743] USB Serial support registered for Keyspan 2 port adapter
[ 3.737854] USB Serial support registered for Keyspan 4 port adapter
[ 3.745208] usbcore: registered new interface driver keyspan
[ 3.751495] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[ 3.960052] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 3.967712] android_usb gadget: Number of LUNs=1
[ 3.972961] lun0: LUN: removable file: (no medium)
[ 3.978729] android_usb gadget: android_usb ready
[ 3.978729] mousedev: PS/2 mouse device common for all mice
[ 3.990631] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 3.992279] usb 1-1: new high speed USB device number 2 using ehci-omap
[ 4.006835] i2c /dev entries driver
[ 4.010864] lirc_dev: IR Remote Control driver registered, major 249
[ 4.018676] IR NEC protocol handler initialized
[ 4.023803] IR RC5(x) protocol handler initialized
[ 4.029083] IR RC6 protocol handler initialized
[ 4.034088] IR JVC protocol handler initialized
[ 4.039184] IR Sony protocol handler initialized
[ 4.044281] IR RC5 (streamzap) protocol handler initialized
[ 4.050537] IR LIRC bridge handler initialized
[ 4.055541] dmm: probe base: fd300000, irq 145
[ 4.061889] device-mapper: uevent: version 1.0.3
[ 4.068664] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-m
[ 4.078430] Bluetooth: HCI UART driver ver 2.2
[ 4.083404] Bluetooth: HCI H4 protocol initialized
[ 4.088775] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[ 4.097259] (stc): st_register(2)
[ 4.097381] cpuidle: using governor ladder
[ 4.097381] cpuidle: using governor menu
[ 4.101043] usbcore: registered new interface driver usbhid
[ 4.101593] usbhid: USB HID core driver
[ 4.120758] (stc): chnl_id list empty :2
[ 4.121124] logger: created 256K log 'log_main'
[ 4.121124] logger: created 256K log 'log_events'
[ 4.121124] logger: created 256K log 'log_radio'
[ 4.121124] logger: created 256K log 'log_system'
[ 4.121490] OMAP HSI: HSI DRIVER Version 0.4.1
[ 4.122741] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
[ 4.122863] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
[ 4.123016] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
[ 4.125549] SDP4430 SoC init
[ 4.173950] (stk) : st_kim_start
[ 4.202758] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 4.203643] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[ 4.206207] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[ 4.208099] asoc: null-codec-dai <-> Voice mapping ok
[ 4.209503] asoc: null-codec-dai <-> Tones mapping ok
[ 4.210906] asoc: null-codec-dai <-> Vibra mapping ok
[ 4.211791] asoc: null-codec-dai <-> MODEM mapping ok
[ 4.212463] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[ 4.213256] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 4.215759] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
[ 4.217895] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Steree
[ 4.218841] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 4.219696] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 4.220703] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 4.221405] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 4.222259] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 4.223388] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 4.224121] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 4.225067] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[ 4.228424] input: Panda Headset Jack as /devices/platform/soc-audio/sound/c1
[ 4.237091] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
[ 4.237762] ALSA device list:
[ 4.237762] #0: TI OMAP4 Board
[ 4.237762] #1: OMAP4HDMI
[ 4.237915] GACT probability NOT on
[ 4.237945] Mirror/redirect action on
[ 4.237945] u32 classifier
[ 4.237945] Actions configured
[ 4.237976] Netfilter messages via NETLINK v0.30.
[ 4.237976] nf_conntrack version 0.5.0 (11637 buckets, 46548 max)
[ 4.237976] ctnetlink v0.93: registering with nfnetlink.
[ 4.239440] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.239440] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.239837] xt_time: kernel timezone is -0000
[ 4.239837] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.242767] arp_tables: (C) 2002 David S. Miller
[ 4.242767] TCP cubic registered
[ 4.243103] NET: Registered protocol family 10
[ 4.250640] Mobile IPv6
[ 4.250640] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.251159] IPv6 over IPv4 tunneling driver
[ 4.257476] NET: Registered protocol family 17
[ 4.258209] NET: Registered protocol family 15
[ 4.258361] Bluetooth: RFCOMM TTY layer initialized
[ 4.258361] Bluetooth: RFCOMM socket layer initialized
[ 4.258361] Bluetooth: RFCOMM ver 1.11
[ 4.258422] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.258422] NET: Registered protocol family 35
[ 4.258422] lib80211: common routines for IEEE802.11 drivers
[ 4.258941] lib80211_crypt: registered algorithm 'NULL'
[ 4.258941] VFP support v0.3:
[ 4.482055] android_work: did not send uevent (0 0 (null))
[ 4.488861] implementor 41 architecture 3 part 30 variant 9 rev 4
[ 4.495727] ThumbEE CPU extension supported.
[ 4.500549] Registering SWP/SWPB emulation handler
[ 4.513061] Reprogramming LPDDR2 timings to 400000000 Hz
[ 4.519653] Power Management for TI OMAP4.
[ 4.525512] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L.
[ 4.536163] sr_init: No PMIC hook to init smartreflex
[ 4.542022] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver inid
[ 4.551177] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver inid
[ 4.555664] (stk) :ldisc_install = 1
[ 4.555694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.572570] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver inid
[ 4.572570] hub 1-1:1.0: USB hub found
[ 4.585906] hub 1-1:1.0: 5 ports detected
[ 4.586029] sr_class1p5_driver_init: OMAP4460: add 10mV margin for class 1.5
[ 4.586547] SmartReflex class 1.5 driver: initialized (86400000ms)
[ 4.595367] clock: disabling unused clocks to save power
[ 4.597198] mmc0: host does not support reading read-only switch. assuming w.
[ 4.597259] mmc0: new SDHC card at address 0007
[ 4.601776] mmcblk0: mmc0:0007 SD8GB 7.48 GiB
[ 4.612915] Alternate GPT is invalid, using primary GPT.
[ 4.612915] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 4.658477] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 4.682647] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nomin0
[ 4.702636] sr_class1p5_calib_work: core: Calibration complete: Voltage Nomi0
[ 4.721862] android_work: did not send uevent (0 0 (null))
[ 4.738006] android_work: did not send uevent (0 0 (null))
[ 4.769134] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 4.784820] mmc1: card claims to support voltages below the defined range. T.
[ 4.804168] sr_class1p5_calib_work: core: Calibration complete: Voltage Nomi0
[ 4.829376] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 4.837036] mmc1: new SDIO card at address 0001
[ 4.905029] android_work: sent uevent USB_STATE=CONNECTED
[ 4.941955] usb 1-1.1: new high speed USB device number 3 using ehci-omap
[ 4.949737] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4.987640] android_work: sent uevent USB_STATE=CONNECTED
[ 4.994110] android_work: sent uevent USB_STATE=DISCONNECTED
[ 5.069763] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=102501
[ 5.079681] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 5.090209] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 5.097961] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumbe0
[ 5.108459] smsc95xx v1.0.4
[ 5.127258] cannot apply mgr(lcd) on inactive device
[ 5.133087] omapfb omapfb: failed to apply dispc config
[ 5.138854] cannot apply mgr(lcd2) on inactive device
[ 5.144836] omapfb omapfb: failed to apply dispc config
[ 5.150665] omapdss DPI: Could not find exact pixel clock. Requested 74250 kz
[ 5.162506] android_work: sent uevent USB_STATE=CONNECTED
[ 5.168792] regulator_init_complete: VANA: incomplete constraints, leaving on
[ 5.178375] regulator_init_complete: VCXIO: incomplete constraints, leaving n
[ 5.187744] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 5.196197] Freeing init memory: 248K
[ 5.206848] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_.
[ 5.218872] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nomin0
[ 5.233703] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0b
[ 5.344299] keychord: using input dev gpio-keys for fevent
[ 5.344482] usb 1-1.3: new full speed USB device number 4 using ehci-omap
[ 5.463348] usb 1-1.3: New USB device found, idVendor=10c4, idProduct=ea60
[ 5.472930] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumbe3
[ 5.481750] usb 1-1.3: Product: CP2102 USB to UART Bridge Controller
[ 5.489013] usb 1-1.3: Manufacturer: Silicon Labs
[ 5.495269] usb 1-1.3: SerialNumber: 0001
[ 5.513793] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. )
[ 5.710327] (stk) :ldisc installation timeout
[ 5.710998] (stk) :ldisc_install = 0
[ 6.214538] EXT4-fs (mmcblk0p6): recovery complete
[ 6.240020] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. c
[ 6.285980] wl1271: loaded
[ 6.289459] wl1271: initialized
[ 6.881439] (stk) : timed out waiting for ldisc to be un-installed
[ 6.975860] (stk) :ldisc_install = 1
[ 8.135375] (stk) :ldisc installation timeout
[ 8.140930] (stk) :ldisc_install = 0
[ 8.614105] EXT4-fs (mmcblk0p7): recovery complete
[ 8.632232] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. c
[ 8.700073] init: cannot find '/vendor/bin/pvrsrvinit', disabling 'pvrsrvini'
[ 8.712371] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 8.727996] init: cannot find '/system/etc/install-recovery.sh', disabling ''
[ 8.741882] android_usb: already disabled
[ 8.745605] adb_bind_config
[ 8.751068] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducatn
[ 8.753448] adb_bind_config
[ 8.755798] warning: `adbd' uses 32-bit capabilities (legacy support in use)
[ 8.755798] adb_open
[ 8.919067] android_work: sent uevent USB_STATE=DISCONNECTED
[ 8.959564] android_work: sent uevent USB_STATE=CONNECTED
[ 8.969177] android_work: sent uevent USB_STATE=DISCONNECTED
[ 9.043975] android_work: sent uevent USB_STATE=CONNECTED
shell@android:/ $ [ 9.296630] (stk) : timed out waiting for ldisc to be un-id
[ 9.416961] (stk) :ldisc_install = 1
[ 9.466003] android_usb gadget: high speed config #1: android
[ 9.473388] android_work: sent uevent USB_STATE=CONFIGURED
[ 9.473876] (stc): st_tty_open
[ 9.473907] (stk) :line discipline installed
[ 9.489288] (stk) :TIInit_7.6.15.bts
[ 9.810668] (stc): add_channel_to_table: id 2
[ 9.816253] (stc): st_register(3)
[ 9.820220] (stc): add_channel_to_table: id 3
[ 9.825653] (stc): st_register(4)
[ 9.829803] (stc): add_channel_to_table: id 4
[ 11.704315] init: untracked pid 100 exited
[ 11.886047] (stc): remove_channel_from_table: id 2
[ 11.891662] (stc): remove_channel_from_table: id 3
[ 11.897033] (stc): remove_channel_from_table: id 4
[ 11.903625] (stc): all chnl_ids unregistered
[ 11.908966] (stk) :ldisc_install = 0
[ 11.914276] (stc): st_tty_close
[ 11.914367] (stc): 2 not un-registered
[ 11.921936] (stc): 3 not un-registered
[ 11.921936] (stc): 4 not un-registered
[ 14.973175] init: untracked pid 251 exited
[ 19.399017] init: untracked pid 257 exited
[ 23.839874] init: untracked pid 263 exited
shell@android:/ $ [ 27.615844] alarm_set_rtc: no RTC, time will be lost on ret
[ 29.369384] init: untracked pid 269 exited
[ 29.386932] init: untracked pid 274 exited
shell@android:/ $
shell@android:/ $
shell@android:/ $ [ 33.925323] init: untracked pid 293 exited
[ 35.168609] init: untracked pid 300 exited
[ 38.606719] init: untracked pid 319 exited
[ 38.674835] init: untracked pid 323 exited
谁能帮我解决这个问题?以上是全部启动信息;
1)串口可以进入“sh”;
2)adb shell 也可以进入android shell……
3)HDMI没有输出!串口一直打印;
4)init: untracked pid 300 exited 串口一直打印这样到错误;
----------------------------------------------------------------------------------------------------------------
这个问题十有八九是和我没下载运行一个脚本文件有关系;因为我从新下载了一个“master"源码,运行了脚本文件;在源码目录生成一个"vendor"目录;OK;
我的pandaboard板子能跑起来了;再没有以上的错误;但是……进入系统“主菜单”后 ……老是“闪屏”!
串口打印:
脚本下载地址:https://developers.google.com/android/nexus/drivers#panda
----------------------------------------------------------------------------------------------------------------