modbus tcp

demo.py

# demo:modbus_tcp应答机制
import modbus_tk.defines as md
import modbus_tk.modbus_tcp as mt
from xlwt.compat import xrange


class ConfigModbus(object):
    host = "127.0.0.1"
    port = 502


# 创建连接对象
master = mt.TcpMaster(ConfigModbus.host, ConfigModbus.port)
master.set_timeout(5.0)

print('连接成功')

try:
    # master.execute 远程连接到服务器端
    # 判断是否链接正常

    START_POS = 0  # 起始位置
    MAX_LENGTH = 10  # 取值的位数
    # md.READ_HOLDING_REGISTERS  # modbus读取保持寄存器 3
    Hold_value = master.execute(slave=1, function_code=md.READ_HOLDING_REGISTERS, starting_address=START_POS,
                                quantity_of_x=MAX_LENGTH, output_value=5)
    print(Hold_value)

    # 写寄存器起始地址为0的保持寄存器，操作寄存器个数为68
    START_POS = 0  # 起始位置
    MAX_LENGTH = 10  # 取值的位数
    # md.READ_HOLDING_REGISTERS  # modbus读取保持寄存器 3
    output_value_2 = [1,1,1,1,1,1,1,1,1,1,]
    data = master.execute(slave=1, function_code=md.WRITE_MULTIPLE_REGISTERS, starting_address=START_POS,
                          quantity_of_x=MAX_LENGTH, output_value=output_value_2)
    print(data)
    Hold_value = master.execute(slave=1, function_code=md.READ_HOLDING_REGISTERS, starting_address=START_POS,
                                quantity_of_x=MAX_LENGTH, output_value=5)
    print(Hold_value, '程序结束')


except Exception as e:
    print("error:", e)
    pass

配合mod_RSsim.exe软件使用
软件下载地址：mod_RSsim.exe