S3C2440启动代码 中断分析

1.建立中断向量表

b     ResetHandler;hereis the first instrument 0x00这是第一条执行的指令                  

b     HandlerUndef ;handler for Undefined mode

b     HandlerSWI   ;handler for SWI interrupt

b     HandlerPabort ;handler for PAbort

b     HandlerDabort       ;handler for DAbort

b     .             ;reserved

b     HandlerIRQ    ;handler for IRQ interrupt

b     HandlerFIQ    ;handler for FIQ interrupt

2. 设置缺省中断处理函数

;将普通中断判断程序的入口地址给HandleIRQ

ldr   r0,=HandleIRQ       ;This routine is needed

ldr   r1,=IsrIRQ       ;ifthere isn't 'subs pc,lr,#4' at 0x18, 0x1c

str    r1,[r0]

3．IRQ的中断服务程序

IsrIRQ 

    sub  sp,sp,#4      ;reserved for PC

       stmfd      sp!,{r8-r9}

       ldr   r9,=INTOFFSET   ;地址为0x4a000014的空间存着中断的偏移

       ldr   r9,[r9]

       ldr   r8,=HandleEINT0

       add  r8,r8,r9,lsl#