安装Nvidia驱动后:
where <level> is 0, 10, 25, 40, 55, 70, 85 or 100
------------------------------------------------
未安装Nvidia驱动:
修改
为:
修改
为:
- switch to an other vt (e.g. Ctrl+Alt+F6)
- run
sudo sh -c "echo -n <level> > /proc/acpi/video/NVID/LCD/brightness"
------------------------------------------------
未安装Nvidia驱动:
修改
sudo gedit /etc/default/acpi-support
ENABLE_LAPTOP_MODE=true
修改
sudo gedit /etc/laptop-mode/laptop-mode.conf
CONTROL_BRIGHTNESS=1
# * If your system has the file "/proc/acpi/video/VID/LCD/brightness" (VID may
# be VID1 or similar), use this file as BRIGHTNESS_OUTPUT, and use
# the command "echo <value>". The possible values can be listed using the
# command:
#
# cat /proc/acpi/video/VID/LCD/brightness
# * If you have a file /sys/class/backlight/.../brightness, then you can use
# that file as BRIGHTNESS_OUTPUT, and the command "echo <value>".
#
# As far as I understand it the values are between 0 and
# the value contained in the file /sys/class/backlight/.../max_brightness.
# * If your system has the file "/proc/acpi/video/VID/LCD/brightness" (VID may
# be VID1 or similar), use this file as BRIGHTNESS_OUTPUT, and use
# the command "echo <value>". The possible values can be listed using the
# command:
#
# cat /proc/acpi/video/VID/LCD/brightness
# * If you have a file /sys/class/backlight/.../brightness, then you can use
# that file as BRIGHTNESS_OUTPUT, and the command "echo <value>".
#
# As far as I understand it the values are between 0 and
# the value contained in the file /sys/class/backlight/.../max_brightness.