timit运行示例一

最新推荐文章于 2022-10-09 22:18:42 发布
最新推荐文章于 2022-10-09 22:18:42 发布
阅读量1.8k 收藏 1
点赞数
分类专栏： 语音处理

TIMIT数据库介绍：

    TIMIT数据库由630个话者组成，每个人讲10句，美式英语的8种主要方言。

TIMIT S5实例：

    首先，将TIMIT.ISO中的TIMIT复制到主文件夹。

1.进入对应的目录，进行如下操作：

zhangju@ubuntu :~$ cd kaldi-trunk/egs/timit/s5/

zhangju@ubuntu :~/kaldi-trunk/egs/timit/s5$

sudo local/timit_data_prep.sh /home/zhangju/TIMIT

会看到如下显示：

Creating coretest set.


MDAB0  MWBT0  FELC0  MTAS1  MWEW0  FPAS0  MJMP0  MLNT0  FPKT0  MLLL0  MTLS0  FJLM0  MBPM0  MKLT0  FNLP0  MCMJ0  MJDH0  FMGD0  MGRT0  MNJM0  FDHC0  MJLN0  MPAM0  FMLD0 


# of utterances in coretest set = 192


Creating dev set.


FAKS0  FDAC1  FJEM0  MGWT0  MJAR0  MMDB1  MMDM2  MPDF0  FCMH0  FKMS0  MBDG0  MBWM0  MCSH0  FADG0  FDMS0  FEDW0  MGJF0  MGLB0  MRTK0  MTAA0  MTDT0  MTHC0  MWJG0  FNMR0  FREW0  FSEM0  MBNS0  MMJR0  MDLS0  MDLF0  MDVC0  MERS0  FMAH0  FDRW0  MRCS0  MRJM4  FCAL1  MMWH0  FJSJ0  MAJC0  MJSW0  MREB0  FGJD0  FJMG0  MROA0  MTEB0  MJFC0  MRJR0  FMML0  MRWS1 


# of utterances in dev set = 400


Finalizing test


Finalizing dev


timit_data_prep succeeded.

于是在/home/zhangju/kaldi-trunk/egs/timit/s5文件夹下新生成data文件夹，其内包含local文件夹以及相关内容。

2 在终端输入：

local/timit_train_lms.sh data/local（下载、计算文本，用以建立语言模型）

local/timit_format_data.sh（处理与fst有关的东西）

3创建train的mfcc：

sudo steps/make_mfcc.sh data/train exp/make_mfcc/train mfccs 4

（要对train，dev，test创建）

会看到：

Succeeded creating MFCC features for train

sudo steps/make_mfcc.sh data/test exp/make_mfcc/test mfccs 4

会看到：

Succeeded creating MFCC features for test

sudo steps/make_mfcc.sh data/dev exp/make_mfcc/dev mfccs 4

会看到：

Succeeded creating MFCC features for dev


4训练单音素系统（monophone systom）

sudo steps/train_mono.sh data/train data/lang exp/mono

会显示：

Computing cepstral mean and variance statistics


Initializing monophone system.


Compiling training graphs


Pass 0


Pass 1


Aligning data


Pass 2


Aligning data


Pass 3


Aligning data


Pass 4


Aligning data


Pass 5


Aligning data


Pass 6


Aligning data


Pass 7


Aligning data


Pass 8


Aligning data


Pass 9


Aligning data


Pass 10


Aligning data


Pass 11


Pass 12


Aligning data


Pass 13


Pass 14


Pass 15


Aligning data


Pass 16


Pass 17


Pass 18


Pass 19


Pass 20


Aligning data


Pass 21


Pass 22


Pass 23


Pass 24


Pass 25


Aligning data


Pass 26


Pass 27


Pass 28


Pass 29


于是，新建了exp/mono文件夹

scripts/mkgraph.sh --mono data/lang exp/mono exp/mono/graph（制图）

会显示：

fsttablecompose data/lang/L.fst data/lang/G.fst


fstdeterminizestar --use-log=true


fstminimizeencoded


fstisstochastic data/lang/tmp/LG.fst


-0.000244359 -0.0912761


warning: LG not stochastic.


fstcomposecontext --context-size=1 --central-position=0 --read-disambig-syms=data/lang/tmp/disambig_phones.list --write-disambig-syms=data/lang/tmp/disambig_ilabels_1_0.list data/lang/tmp/ilabels_1_0


fstisstochastic data/lang/tmp/CLG_1_0.fst


-0.000244359 -0.0912761


warning: CLG not stochastic.


make-h-transducer --disambig-syms-out=exp/mono/graph/disambig_tid.list --transition-scale=1.0 data/lang/tmp/ilabels_1_0 exp/mono/tree exp/mono/final.mdl


fstminimizeencoded


fstdeterminizestar --use-log=true


fsttablecompose exp/mono/graph/Ha.fst data/lang/tmp/CLG_1_0.fst


fstrmsymbols exp/mono/graph/disambig_tid.list


fstrmepslocal


fstisstochastic exp/mono/graph/HCLGa.fst


0.000331581 -0.091291


HCLGa is not stochastic


add-self-loops --self-loop-scale=0.1 --reorder=true exp/mono/final.mdl

5.for test in dev test ; do

  steps/decode_deltas.sh exp/mono data/$test data/lang exp/mono/decode_$test &

done（解码test数据集（test是*/s5/data中dev、test文件夹中的test文件夹））

终端输出结果是：[1] 2307

                      [2] 2308

6.scripts/average_wer.sh exp/mono/decode_*/wer > exp/mono/wer

会显示：

[1]-  完成                  steps/decode_deltas.sh exp/mono data/$test data/lang exp/mono/decode_$test


[2]+  完成                  steps/decode_deltas.sh exp/mono data/$test data/lang exp/mono/decode_$test

7从单音素系统中获得alignments：（分别从mono文件夹中的train,dev,test中获得）（用以训练其他系统）

steps/align_deltas.sh data/train data/lang exp/mono exp/mono_ali_train

会显示：

Computing cepstral mean and variance statistics


Aligning all training data


Done.

方法二：修改run.sh中的timit路径，但后直接运行run.sh

TIMIT S3实例

1 数据准备，输入：

local/timit_data_prep.sh  /home/zhangju/TIMIT

终端显示：

Creating coretest set.

MDAB0  MWBT0  FELC0  MTAS1  MWEW0  FPAS0  MJMP0  MLNT0  FPKT0  MLLL0  MTLS0  FJLM0  MBPM0  MKLT0  FNLP0  MCMJ0  MJDH0  FMGD0  MGRT0  MNJM0  FDHC0  MJLN0  MPAM0  FMLD0  （这是说话人的名字，前面加M，F分别表示男性和女性）

# of utterances in coretest set = 192 （核心测试集中有192句话）

Creating dev set.

FAKS0  FDAC1  FJEM0  MGWT0  MJAR0  MMDB1  MMDM2  MPDF0  FCMH0  FKMS0  MBDG0  MBWM0  MCSH0  FADG0  FDMS0  FEDW0  MGJF0  MGLB0  MRTK0  MTAA0  MTDT0  MTHC0  MWJG0  FNMR0  FREW0  FSEM0  MBNS0  MMJR0  MDLS0  MDLF0  MDVC0  MERS0  FMAH0  FDRW0  MRCS0  MRJM4  FCAL1  MMWH0  FJSJ0  MAJC0  MJSW0  MREB0  FGJD0  FJMG0  MROA0  MTEB0  MJFC0  MRJR0  FMML0  MRWS1 

# of utterances in dev set = 400 （设备集中有400句话）

Finalizing test （完成test）

Finalizing dev （完成dev）

timit_data_prep succeeded.

输入：

local/timit_train_lms.sh data/local

终端显示为

Not installing the kaldi_lm toolkit since it is already there.

（kaldi_lm工具箱里有：

compute_perplexity计算复杂度（用于对语言模型作评估，复杂度越低越好）

discount_ngrams给n阶语法模型作平滑处理（留出频率给实际会出现的但ngram中没出现的词语组合）

get_raw_ngrams（得到原始n阶语法模型）

get_word_map.pl*（得到词语的映射表）

interpolate_ngrams（补充（修改）n阶语法模型）

finalize_arpa.pl（完成arpa（arpa是一种格式，协议），是interpolate_ngrams程序中调用的）

map_words_in_arpa.pl（得到arpa格式的词语）

merge_ngrams（合并、融合n阶语法模型）

merge_ngrams_online（在线合并、融合n阶语法模型）

optimize_alpha.pl（使alpha最优化）

prune_lm.sh（删去出现频率较低的数据）

prune_ngrams（删去出现频率较低的数据）

scale_configs.pl

train_lm.sh（训练语言模型）

uniq_to_ngrams

）

Creating phones file, and monophone lexicon (mapping phones to itself). （创建音子文件及单音素词典）

Creating biphone model（创建双音子模型）

Training biphone language model in folder data/local/lm （训练双音子语言模型）

Creating directory data/local/lm/biphone (创建目录data/local/lm/biphone )

Getting raw N-gram counts （）

Iteration 1/7 of optimizing discounting parameters

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.900000 phi=2.000000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.900000 phi=2.000000

discount_ngrams: for n-gram order 3, D=0.800000, tau=1.100000 phi=2.000000

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.675000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.675000 phi=2.000000

discount_ngrams: for n-gram order 3, D=0.800000, tau=0.825000 phi=2.000000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=1.215000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=1.215000 phi=2.000000

discount_ngrams: for n-gram order 3, D=0.800000, tau=1.485000 phi=2.000000

interpolate_ngrams: 60 words in wordslist

Perplexity over 11412.000000 words is 17.013357

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.460842

real   0m0.021s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.016472

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.464985

real   0m0.020s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.021475

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.471402

real   0m0.025s

user   0m0.012s

sys 0m0.000s

optimize_alpha.pl: alpha=-2.1628504673 is too negative, limiting it to -0.5

Projected perplexity change from setting alpha=-0.5 is 17.016472->17.0106241428571, reduction of 0.00584785714286085

Alpha value on iter 1 is -0.5

Iteration 2/7 of optimizing discounting parameters

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=0.600000, tau=0.550000 phi=2.000000

interpolate_ngrams: 60 words in wordslist

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=0.800000, tau=0.550000 phi=2.000000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.080000, tau=0.550000 phi=2.000000

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.018s

user   0m0.004s

sys 0m0.008s

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.022s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.019s

user   0m0.008s

sys 0m0.004s

optimize_alpha.pl: objective function is not convex; returning alpha=0.7

Projected perplexity change from setting alpha=0.7 is 17.011355->17.011355, reduction of 0

Alpha value on iter 2 is 0.7

Iteration 3/7 of optimizing discounting parameters

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.412500 phi=2.000000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.550000 phi=2.000000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.742500 phi=2.000000

interpolate_ngrams: 60 words in wordslist

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.020s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.019s

user   0m0.008s

sys 0m0.004s

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.021s

user   0m0.012s

sys 0m0.000s

optimize_alpha.pl: objective function is not convex; returning alpha=0.7

Projected perplexity change from setting alpha=0.7 is 17.011355->17.011355, reduction of 0

Alpha value on iter 3 is 0.7

Iteration 4/7 of optimizing discounting parameters

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=1.750000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.000000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.350000

interpolate_ngrams: 60 words in wordslist

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.018s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.018s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.023s

user   0m0.012s

sys 0m0.000s

optimize_alpha.pl: objective function is not convex; returning alpha=0.7

Projected perplexity change from setting alpha=0.7 is 17.011355->17.011355, reduction of 0

Alpha value on iter 4 is 0.7

Iteration 5/7 of optimizing discounting parameters

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.450000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

interpolate_ngrams: 60 words in wordslist

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.600000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.810000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

Perplexity over 11412.000000 words is 17.008195

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.454326

real   0m0.019s

user   0m0.008s

sys 0m0.004s

Perplexity over 11412.000000 words is 17.011355

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.457880

real   0m0.019s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.018212

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.465417

real   0m0.021s

user   0m0.012s

sys 0m0.000s

optimize_alpha.pl: alpha=-0.670499383475985 is too negative, limiting it to -0.5

Projected perplexity change from setting alpha=-0.5 is 17.011355->17.0064832142857, reduction of 0.00487178571427904

Alpha value on iter 5 is -0.5

Iteration 6/7 of optimizing discounting parameters

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.300000, tau=0.337500 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 2, D=0.300000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.300000, tau=0.607500 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

Perplexity over 11412.000000 words is 17.008198

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.454134

real   0m0.019s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.006972

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.452861

real   0m0.020s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.006526

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.452349

real   0m0.022s

user   0m0.012s

sys 0m0.000s

Projected perplexity change from setting alpha=0.280321158690507 is 17.006972->17.0064966287094, reduction of 0.000475371290633575

Alpha value on iter 6 is 0.280321158690507

Iteration 7/7 of optimizing discounting parameters

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.300000, tau=0.576145 phi=1.750000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

interpolate_ngrams: 60 words in wordslist

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.300000, tau=0.576145 phi=2.350000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.300000, tau=0.576145 phi=2.000000

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

interpolate_ngrams: 60 words in wordslist

interpolate_ngrams: 60 words in wordslist

Perplexity over 11412.000000 words is 17.006845

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.452750

real   0m0.019s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.006575

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.452414

real   0m0.021s

user   0m0.012s

sys 0m0.000s

Perplexity over 11412.000000 words is 17.006336

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.452127

real   0m0.022s

user   0m0.012s

sys 0m0.000s

Projected perplexity change from setting alpha=0.690827338145686 is 17.006575->17.0062591109755, reduction of 0.000315889024498972

Alpha value on iter 7 is 0.690827338145686

Final config is:

D=0.4 tau=0.45 phi=2.0

D=0.3 tau=0.576144521410728 phi=2.69082733814569

D=1.36 tau=0.935 phi=2.7

Discounting N-grams.

discount_ngrams: for n-gram order 1, D=0.400000, tau=0.450000 phi=2.000000

discount_ngrams: for n-gram order 2, D=0.300000, tau=0.576145 phi=2.690827

discount_ngrams: for n-gram order 3, D=1.360000, tau=0.935000 phi=2.700000

Computing final perplexity

Building ARPA LM (perplexity computation is in background)

interpolate_ngrams: 60 words in wordslist

interpolate_ngrams: 60 words in wordslist

Perplexity over 11412.000000 words is 17.006029

Perplexity over 10833.000000 words (excluding 579.000000 OOVs) is 17.451754

17.006029

输入

local/timit_format_data.sh

终端显示：

Creating L.fst

Done creating L.fst

Creating L_disambig.fst

Done creating L_disambig.fst

Creating G.fst

arpa2fst -

\data\

Processing 1-grams

Processing 2-grams

Connected 0 states without outgoing arcs.

remove_oovs.pl: removed 0 lines.

G.fst created. How stochastic is it ?

fstisstochastic data/lang_test/G.fst

0 -0.0900995

fsttablecompose data/lang_test/L_disambig.fst data/lang_test/G.fst

How stochastic is LG.fst.

fstisstochastic data/lang_test/G.fst

0 -0.0900995

fstisstochastic

fsttablecompose data/lang/L.fst data/lang_test/G.fst

0 -0.0900994

How stochastic is LG_disambig.fst.

fsttablecompose data/lang_test/L_disambig.fst data/lang_test/G.fst

fstisstochastic

0 -0.0900994

First few lines of lexicon FST:

0   1   <eps>  <eps>  0.356674939

0   1   sil <eps>  1.20397282

1   2   aa  AA  1.20397282

1   1   aa  AA  0.356674939

1   1   ae  AE  0.356674939

1   2   ae  AE  1.20397282

1   1   ah  AH  0.356674939

1   2   ah  AH  1.20397282

1   1   ao  AO  0.356674939

1   2   ao  AO  1.20397282

timit_format_data succeeded.

输入：mfccdir=mfccs

 for test in train test dev ; do

>   steps/make_mfcc.sh data/$test exp/make_mfcc/$test $mfccdir 4

> done

终端显示：

Succeeded creating MFCC features for train

Succeeded creating MFCC features for test

Succeeded creating MFCC features for dev

2 训练单音素系统，终端输入：

steps/train_mono.sh data/train data/lang exp/mono

终端显示：

Computing cepstral mean and variance statistics

Initializing monophone system.

Compiling training graphs

Pass 0

Pass 1

Aligning data

Pass 2

Aligning data

Pass 3

Aligning data

Pass 4

Aligning data

Pass 5

Aligning data

Pass 6

Aligning data

Pass 7

Aligning data

Pass 8

Aligning data

Pass 9

Aligning data

Pass 10

Aligning data

Pass 11

Pass 12

Aligning data

Pass 13

Pass 14

Pass 15

Aligning data

Pass 16

Pass 17

Pass 18

Pass 19

Pass 20

Aligning data

Pass 21

Pass 22

Pass 23

Pass 24

Pass 25

Aligning data

Pass 26

Pass 27

Pass 28

Pass 29

scripts/mkgraph.sh --mono data/lang_test exp/mono exp/mono/graph（制图）

终端显示：

fsttablecompose data/lang_test/L_disambig.fst data/lang_test/G.fst

fstminimizeencoded

fstdeterminizestar --use-log=true

fstisstochastic data/lang_test/tmp/LG.fst

0 -0.0901494

warning: LG not stochastic.

fstcomposecontext --context-size=1 --central-position=0 --read-disambig-syms=data/lang_test/tmp/disambig_phones.list --write-disambig-syms=data/lang_test/tmp/disambig_ilabels_1_0.list data/lang_test/tmp/ilabels_1_0

fstisstochastic data/lang_test/tmp/CLG_1_0.fst

0 -0.0901494

warning: CLG not stochastic.

make-h-transducer --disambig-syms-out=exp/mono/graph/disambig_tid.list --transition-scale=1.0 data/lang_test/tmp/ilabels_1_0 exp/mono/tree exp/mono/final.mdl

fsttablecompose exp/mono/graph/Ha.fst data/lang_test/tmp/CLG_1_0.fst

fstdeterminizestar --use-log=true

fstminimizeencoded

fstrmsymbols exp/mono/graph/disambig_tid.list

fstrmepslocal

fstisstochastic exp/mono/graph/HCLGa.fst

0 -0.0901494

HCLGa is not stochastic

add-self-loops --self-loop-scale=0.1 --reorder=true exp/mono/final.mdl

3 解码测试的数据集，输入

for test in dev test ; do

  steps/decode_deltas.sh exp/mono data/$test data/lang exp/mono/decode_$test &

done

终端显示：

[1] 16368

[2] 16369

3.1计算结果，输入：

scripts/average_wer.sh exp/mono/decode_*/wer > exp/mono/wer

终端显示：

[1]-  完成                  steps/decode_deltas.sh exp/mono data/$test data/lang exp/mono/decode_$test

[2]+  完成                  steps/decode_deltas.sh exp/mono data/$test data/lang exp/mono/decode_$test

4 从单音素系统中获得排列

创建排列用以训练其他系统，如ANN-HMM。

输入：

steps/align_deltas.sh data/train data/lang exp/mono exp/mono_ali_train

终端显示：

Computing cepstral mean and variance statistics

Aligning all training data

Done.

steps/align_deltas.sh data/dev data/lang exp/mono exp/mono_ali_dev

方法二：修改相应的TIMIT路径之后，直接运行run.sh

TIMIT S4实例此脚本是用于构建一个音位识别器

WORKDIR=/home/zhangju/ss4（自己找个有空间的路径作为WORKDIR）

 mkdir -p $WORKDIR

cp -r conf local utils steps path.sh $WORKDIR

cd $WORKDIR

. path.sh（此文件中的环境变量KALDIROOT要自己修改路径，改到自己裝的kaldi文件中。KALDIROOT=/home/mayuan/kaldi-trunk（我用nano改的。））

local/timit_data_prep.sh --config-dir=$PWD/conf --corpus-dir=/home/zhangju/TIMIT --work-dir=$WORKDIR

小白也不想白
关注
  • 0
    点赞
  • 踩
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
使用组策略限制软件运行示例.docx
11-23
使用组策略限制软件运行示例.docx
KALDI工具箱运行TIMIT语料库库实例教程
03-14 1184
TIMIT数据库介绍：     TIMIT数据库由630个话者组成，每个人讲10句，美式英语的8种主要方言。 TIMIT S5实例：     首先，将TIMIT.ISO中的TIMIT复制到主文件夹。 1.进入对应的目录，进行如下操作： zhangju@ubuntu :~$ cd kaldi-trunk/egs/timit/s5/ zhangju@ubun
语言模型（一） 工具和使用简介
xmdxcsj的专栏
08-30 6966
一、常用工具 1.      Kenlm https://kheafield.com/code/kenlm/ C++版本，最大特点是速度快、占用内存少 2.      Srilm http://www.speech.sri.com/projects/srilm/ SRI（Standford ResearchInstitute）开发，使用比较广泛，c++版本 3.      IRSTL
kaldi的TIMIT实例二
aig8440的博客
09-15 204
============================================================================ MonoPhone Training & Decoding ===================================...
TIMIT数据库
Just for fun的专栏
12-04 1万+
数据是大数据时代互联网巨头们傲视群雄的秘密武器。当我们想要接触一个数据驱动型的新领域（如语音识别）时，往往囿于没有足够成熟的数据做实验而举步维艰。幸运的是，有很多机构将他们的成熟的数据公开出来，供我们学习、研究，TIMIT数据库就是其中之一。    TIMIT全称The DARPA TIMIT Acoustic-Phonetic Continuous Speech Corpus, 是由德州仪器(
import torch报错画图问题Matplotlib created a temporary config/cache directory at /tmp/matplotl
pvmsmfchcs的博客
10-09 1431
在使用matpotlib的时候，安装完毕后我import torch，出现这个报错，大致意思是在缓存区不能安装matplotlib，所以重新在其他地方创建了一个位置，我去看了下缓存区，我的matplotlib文件夹带锁了，删除这个文件夹，写在matplotlib重新安装就好了。重新import torch正常
python thread 并发且顺序运行示例
12-23
复制代码 代码如下:#-*- coding:utf-8 -*- import threading import time def fun(name, ls_name, front_thread = None): ””’ 线程启动函数 通过front_thread来使用线程有序的运行 ”’ time.clock() time.sleep...
可运行ajax示例说明
01-25
ajax示例说明
echarts本地运行示例
03-13
使用echartes.js的示例，可在本地运行
Java在线编辑编译运行示例
02-03
Java源文件在线编辑, 并编译运行, 输出运行结果示例
Kaldi脚本分析（6）——解码图构建
baidu_36137891的博客
08-25 6334
静态解码图构建的过程，就是将数据准备和预编译阶段得到的词典FST、语言模型FST、声学建模阶段得到的HMM拓扑FST以及可能的上下文关系FST，通过如下的公式进行组合优化处理，得到最终的HCLG图。Kaldi中对FST的很多操作与参考文献[1]中稍有不同，尤其是对消歧符号和权重推移等的处理上。
Kaldi 和 TIMIT 入门
wamgzi1998
09-03 1856
一、对Kaldi的理解 1.1Kaldi的诞生 1.2Kaldi 语音识别系统特点 1.3 Kaldi主要的声学算法模型 1.4Kaldi中程序训练的难点 二、TIMIT程序的简介 2.1 程序训练方法简述 2.2 程序数据集的信息 2.3 TIMIT文件组织结构 三、TIMIT程序脚本的处理流程 3.1 run 脚本的主要结构 3.2 run 脚本具体运行流程及特点 3.3 Kaldi中的DNN模型训练 3.4 总结训练模型的程序结构
Kaldi 入门使用教程
snowleopard_bin的博客
07-05 3054
Kaldi 入门使用教程
语音识别工具箱之kaldi介绍
热门推荐
u010384318的专栏
12-04 2万+
最近有几个人在群里问我kaldi的问题，不巧的是最近我在忙我的开题。我对kaldi的了解也就是语音识别+深度学习。如果不是kaldi有dnn模型，或许我更愿意用htk吧。其实，基本的都差不多吧。kaldi可以说是更加丰富吧。本来准备开题开语音识别，但是由于导师的反对，不得不做现在的歌曲人声分离。进入到这个新的领域，我不得不怀疑自己的学习能力，现在的我变的不淡定了。很久没有写博文，也许很忙，也许自己
STM32中的基本定时器使用（TIM）
janson_24的博客
06-08 5427
STM32F103中的基本定时器的使用（TIM2为例） 一、配置简介 STM32中的定时器配置大同小异，每个配置时只需要改成自己想要的定时器即可（本文以TIM2为例）。 定时器简单点理解就是设定了一个值（arr：自动重装载值），从这个值向下减到零或者从零向上计数到这个值，则会产生一个中断信号，执行定时器中断服务程序。 通过自动重装载值（arr）和时钟预分频数（psc）搭配，就可以控制定时时间的长短。 配置思路： 1：NVIC配置。 2：定时器配置 3：定时器中断服务程序 4：主程序调用 void tim2
TIM基本定时器
qq_43607588的博客
02-04 1292
基本定时器功能 基本定时器主要两个功能，第一就是基本定时功能，生成时基，第二就是专门用于驱动数模转换器(DAC)。 基本定时器代码 标准库函数对定时器外设建立了四个初始化结构体，基本定时器只用到其中一个即TIM_TimeBaseInitTypeDef，该结构体成员用于设置定时器基本工作参数，并由定时器基本初始化配置函数 TIM_TimeBaseInit 调用。 模式配置函数 void TIM_M...
语音识别系统之kaldi------voxforge实例
u010384318的专栏
12-24 1万+
首先来介绍下voxforge。voxforge是个收集语音的网址，你可以免费的得到
kaldi跑timit数据全过程记录
sun___shy的博客
09-05 1628
 电脑配置：i5-7300H，4G，1050 2G，运行近四个小时。 wxy@HP-WXY:~/kaldi/egs/timit/s5$ ./run.sh ============================================================================ Data &amp; Lexicon &amp; Lan...
qserialport 运行示例
最新发布
06-03
好的，这里是一个简单的 QSerialPort 运行示例： ```cpp #include <QCoreApplication> #include <QtSerialPort/QSerialPort> int main(int argc, char *argv[]) { QCoreApplication a(argc, argv); QSerialPort serial; // 设置串口名称和波特率 serial.setPortName("COM1"); serial.setBaudRate(QSerialPort::Baud115200); // 打开串口 if (serial.open(QIODevice::ReadWrite)) { // 发送数据 serial.write("Hello World!"); // 等待接收数据 if (serial.waitForReadyRead(5000)) { QByteArray data = serial.readAll(); qDebug() << "Received data:" << data; } else { qDebug() << "Timeout!"; } // 关闭串口 serial.close(); } else { qDebug() << "Failed to open serial port!"; } return a.exec(); } ``` 这个示例演示了如何设置串口名称和波特率，打开串口，发送数据，等待接收数据以及关闭串口。注意，waitForReadyRead() 函数是阻塞函数，等待接收到数据或超时之后才会返回。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值