Centos 安装
yum install iproute iproute-doc
Ubuntu 安装
apt-get install iproute iproute-doc
风.fox
说明 | net-tools | iproute2 |
---|---|---|
邻居 | arp -na arp | ip neigh |
地址和链路配置 | ifconfig | ip link ip addr |
显示全部接口信息 显示IP | ifconfig -a | ip addr show |
帮助 | ifconfig –help | ip help |
显示摘要信息 | ifconfig -s | ip -s link |
启动指定网络设备/网卡 | ifconfig eth0 up | ip link set eth0 up |
组播 | ipmaddr | ip maddr |
ip隧道 | iptunnel | ip tunnel |
统计 | netstat | ss |
显示网络界面信息表单 | netstat -i | ip -s link |
显示多重广播功能群组组员名单 | netstat -g | ip maddr |
列出监听服务状态 | netstat -l | ss -l |
路由表 | netstat -r route | ip route |
添加路由 | route add | ip route add |
删除路由 | route del | ip route del |
查看路由状态 | route -n | ip route show |
增删VLAN | vconfig | ip link |
显示当前监听端口
ss -pltn
以下全部是转载
ip地址管理
1.显示ip地址
ip a
ip address show
ip addr show dev eth0
ip a sh eth0
2.增加删除地址
ip address add 192.0.2.1/24 dev eth0
ip addr del 192.0.2.2/24 dev eth0
3.显示接口统计
ip -s link ls eth0
网卡和链路配置
4.显示链路
ip link show
ip link sh eth0
4.修改接口状态
ip link set eth0 up
ip link s gre01 down
路由表管理
5.显示路由表
ip route
ip ro show dev gre01
6.增加新路由
ip route add 10.2.2.128/27 dev gre01
7.增加默认路由
ip route add default via 192.168.1.1
8.修改默认路由
ip route chg default via 192.168.1.2
9.删除默认路由
ip route del default
隧道配置
10.增加删除GRE隧道
ip tunnel add gre01 mode gre local 10.1.1.1 remote 20.2.2.1 ttl 255
ip tunnel del gre01
11.IPIP隧道
ip tunl a ipip01 mode ipip local 10.1.1.1 remote 20.2.2.1 ttl 255
12.显示隧道
ip tunnel show
13.显示隧道统计
ip -s tunl ls gre01
邻居和arp表管理
13.查看arp表
ip neigh show
14.手工增加删除arp项
ip neighbor add 10.2.2.2 dev eth0
ip neigh del 10.2.2.1 dev eth0
socket统计
15.显示当前监听
ss -l
15.显示当前监听的进程
ss -p
查看端口链接
lsof -n -i4TCP:80 | grep LISTEN # Verified on macOS Sierra
lsof -n -iTCP:80 | grep LISTEN
lsof -n -i:80 | grep LISTEN
为了不显示端口的俗称,你可以加P参数:
lsof -nP -i4TCP:$PORT | grep LISTEN # Verified on macOS Sierra
lsof -nP -iTCP:$PORT | grep LISTEN
lsof -nP -i:$PORT | grep LISTEN
来自:
http://www.jianshu.com/p/125fbe9dc1d2
http://blog.csdn.net/kevin3101/article/details/52368860
http://linoxide.com/linux-command/use-ip-command-linux/
http://colobu.com/2017/07/11/show-connections-in-MACOS/