s3c2410_gpio_setpin()系列函数

系列函数的定义在arch/arm/mach-s3c2410/gpio.c，相关的宏定义在include/asm-arm/arch-s3c2410/regs-gpio.h

（1）void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);

设置相应GPIO口的输出值，例如：
pin=S3C2410_GPG2，to=0，则设置S3C2410＿GPG2的输出值为0；
pin=S3C2410_GPG2，to=1，则设置S3C2410＿GPG2的输出值为1。

函数定义：

void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
{
    void __iomem *base = S3C2410_GPIO_BASE(pin);
    unsigned long offs = S3C2410_GPIO_OFFSET(pin);
    unsigned long flags;
    unsigned long dat;

    local_irq_save(flags);

    dat = __raw_readl(base + 0x04);
    dat &= ~(1 << offs);
    dat |= to << offs;
    __raw_writel(dat, base + 0x04);

    local_irq_restore(flags);
}
EXPORT_SYMBOL(s3c2410_gpio_setpin);

（2）unsigned int s3c2410_gpio_getpin(unsigned int pin);

获取相应GPIO口的值。

函数定义：

unsigned int s3c2410_gpio_getpin(unsigned int pin)
{
    void __iomem *base = S3C2410_GPIO_BASE(pin);
    unsigned long offs = S3C2410_GPIO_OFFSET(pin);

    return __raw_readl(base + 0x04) & (1<< offs);
}

EXPORT_SYMBOL(s3c2410_gpio_getpin);

（3）void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);

设置相应GPIO口的工作模式，输入、输出、中断等。

函数定义：

void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
{
    void __iomem *base = S3C2410_GPIO_BASE(pin);
    unsigned long mask;
    unsigned long con;
    unsigned long flags;

    if (pin < S3C2410_GPIO_BANKB) {
        mask = 1 << S3C2410_GPIO_OFFSET(pin);
    } else {
        mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
    }

    local_irq_save(flags);

    con  = __raw_readl(base + 0x00);
    con &= ~mask;
    con |= function;

    __raw_writel(con, base + 0x00);

    local_irq_restore(flags);
}

EXPORT_SYMBOL(s3c2410_gpio_cfgpin);

（4）unsigned int s3c2410_gpio_getcfg(unsigned int pin);

获取相应GPIO口的工作模式，输入、输出、中断等。

函数定义：

unsigned int s3c2410_gpio_getcfg(unsigned int pin)
{
	void __iomem *base = S3C2410_GPIO_BASE(pin);
	unsigned long mask;

	if (pin < S3C2410_GPIO_BANKB) {
		mask = 1 << S3C2410_GPIO_OFFSET(pin);
	} else {
		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
	}

	return __raw_readl(base) & mask;
}

EXPORT_SYMBOL(s3c2410_gpio_getcfg);

（5）void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);

设置相应的GPIO口的电平，例如：

pin=S3C2410_GPG2，to=0，则拉低S3C2410_GPG2，也就是设置S3C2410＿GPG2的值为0；
pin=S3C2410_GPG2，to=1，则拉高S3C2410_GPG2，也就是设置S3C2410＿GPG2的值为1。

函数定义：

void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
{
	void __iomem *base = S3C2410_GPIO_BASE(pin);
	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
	unsigned long flags;
	unsigned long up;

	if (pin < S3C2410_GPIO_BANKB)
		return;

	local_irq_save(flags);

	up = __raw_readl(base + 0x08);
	up &= ~(1L << offs);
	up |= to << offs;
	__raw_writel(up, base + 0x08);

	local_irq_restore(flags);
}

EXPORT_SYMBOL(s3c2410_gpio_pullup);

（6）unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change);

杂项设置，设置寄存器MISCCR，具体看函数定义。

函数定义：

unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
{
	unsigned long flags;
	unsigned long misccr;

	local_irq_save(flags);
	misccr = __raw_readl(S3C2410_MISCCR);
	misccr &= ~clear;
	misccr ^= change;
	__raw_writel(misccr, S3C2410_MISCCR);
	local_irq_restore(flags);

	return misccr;
}

EXPORT_SYMBOL(s3c2410_modify_misccr);

（7）int s3c2410_gpio_getirq(unsigned int pin);

获取相应的GPIO口所对应的中断号。

函数定义：

int s3c2410_gpio_getirq(unsigned int pin)
{
	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23)
		return -1;	/* not valid interrupts */

	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
		return -1;	/* not valid pin */

	if (pin < S3C2410_GPF4)
		return (pin - S3C2410_GPF0) + IRQ_EINT0;

	if (pin < S3C2410_GPG0)
		return (pin - S3C2410_GPF4) + IRQ_EINT4;

	return (pin - S3C2410_GPG0) + IRQ_EINT8;
}

EXPORT_SYMBOL(s3c2410_gpio_getirq);

（8）int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, unsigned int config);

中断过滤配置，具体看函数定义。

函数定义：

int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
			   unsigned int config)
{
	void __iomem *reg = S3C2410_EINFLT0;
	unsigned long flags;
	unsigned long val;

	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
		return -1;

	config &= 0xff;

	pin -= S3C2410_GPG8_EINT16;
	reg += pin & ~3;

	local_irq_save(flags);

	/* update filter width and clock source */

	val = __raw_readl(reg);
	val &= ~(0xff << ((pin & 3) * 8));
	val |= config << ((pin & 3) * 8);
	__raw_writel(val, reg);

	/* update filter enable */

	val = __raw_readl(S3C2410_EXTINT2);
	val &= ~(1 << ((pin * 4) + 3));
	val |= on << ((pin * 4) + 3);
	__raw_writel(val, S3C2410_EXTINT2);

	local_irq_restore(flags);

	return 0;
}

EXPORT_SYMBOL(s3c2410_gpio_irqfilter);

相应GPIO地址以及值的计算参考http://snailszzy.blog.163.com/blog/static/943990932010925102538499/