Android使用BitmapFactory.Options压缩图片解决加载大图片内存溢出

由于Android对图片使用内存有限制,若是加载几兆的大图片便内存溢出。Bitmap会将图片的所有像素(即长x宽)加载到内存中,如果图片分辨率过大,会直接导致内存溢出(java.lang.OutOfMemoryError),只有在BitmapFactory加载图片时使用BitmapFactory.Options对相关参数进行配置来减少加载的像素。

1、设置缩放大小对图片作处理

 

public Bitmap getBitmapFromFile(File dst, int width, int height) {
    if (null != dst && dst.exists()) {
        BitmapFactory.Options opts = null;
        if (width > 0 && height > 0) {
            opts = new BitmapFactory.Options();
            opts.inJustDecodeBounds = true;
            BitmapFactory.decodeFile(dst.getPath(), opts);
            // 计算图片缩放比例
            final int minSideLength = Math.min(width, height);
            opts.inSampleSize = computeSampleSize(opts, minSideLength,
                    width * height);
            opts.inJustDecodeBounds = false;
            opts.inInputShareable = true;
            opts.inPurgeable = true;
        }
        try {
            return BitmapFactory.decodeFile(dst.getPath(), opts);
        } catch (OutOfMemoryError e) {
            e.printStackTrace();
        }
    }
    return null;
}

public static int computeSampleSize(BitmapFactory.Options options,
        int minSideLength, int maxNumOfPixels) {
    int initialSize = computeInitialSampleSize(options, minSideLength,
            maxNumOfPixels);

    int roundedSize;
    if (initialSize <= 8) {
        roundedSize = 1;
        while (roundedSize < initialSize) {
            roundedSize <<= 1;
        }
    } else {
        roundedSize = (initialSize + 7) / 8 * 8;
    }

    return roundedSize;
}

private static int computeInitialSampleSize(BitmapFactory.Options options,
        int minSideLength, int maxNumOfPixels) {
    double w = options.outWidth;
    double h = options.outHeight;

    int lowerBound = (maxNumOfPixels == -1) ? 1 : (int) Math.ceil(Math
            .sqrt(w * h / maxNumOfPixels));
    int upperBound = (minSideLength == -1) ? 128 : (int) Math.min(Math
            .floor(w / minSideLength), Math.floor(h / minSideLength));

    if (upperBound < lowerBound) {
        // return the larger one when there is no overlapping zone.
        return lowerBound;
    }

    if ((maxNumOfPixels == -1) && (minSideLength == -1)) {
        return 1;
    } else if (minSideLength == -1) {
        return lowerBound;
    } else {
        return upperBound;
    }
}

 

 

 

	/**
	 * 获取经过处理的资源图,包括普通图和.9图
	 * @param context 应用环境
	 * @param id 资源id
	 * @return Drawable格式的资源
	 * <p>
	 * 以1080p为基准,小于此尺寸的缩写,大于此尺寸的放大
	 */
	public static Drawable getCompatibleDrawable(Context context, int id) {
		BitmapFactory.Options options = new BitmapFactory.Options();
		options.inDensity = 240;
		options.inScreenDensity = (int) (240*ratio);
		options.inTargetDensity = (int) (240*ratio);

		Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(),
				id, options);
		byte[] ninePathChunk = bitmap.getNinePatchChunk();
		
		if (NinePatch.isNinePatchChunk(ninePathChunk)) {
			NinePatch ninePath = new NinePatch(bitmap, ninePathChunk, null);
			
			return new NinePatchDrawable(ninePath);
		} else {
			return new BitmapDrawable(bitmap);
		}
	}

 

 

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
`BitmapFactory.Options` 是一个用于配置位图加载选项的类。使用 `BitmapFactory.Options` 可以控制位图的加载方式,如缩放、解码格式、采样率等。以下是一个简单的使用示例: ```java // 加载图片的选项 BitmapFactory.Options options = new BitmapFactory.Options(); // 设置为 true,只获取图片的宽度和高度,不加载图片到内存中 options.inJustDecodeBounds = true; BitmapFactory.decodeResource(getResources(), R.drawable.my_image, options); // 计算采样率 int sampleSize = calculateInSampleSize(options, reqWidth, reqHeight); // 设置采样率 options.inSampleSize = sampleSize; // 关闭只获取图片宽度和高度的选项 options.inJustDecodeBounds = false; // 加载图片到内存中 Bitmap bitmap = BitmapFactory.decodeResource(getResources(), R.drawable.my_image, options); ``` 以上示例中,首先使用 `inJustDecodeBounds` 选项将 `BitmapFactory.decodeResource()` 方法的返回值设置为 null,并且只获取图片的宽度和高度,而不是真正地将图片加载到内存中。接着,根据目标宽度和高度计算采样率,然后将采样率设置到 `inSampleSize` 选项中。最后,关闭 `inJustDecodeBounds` 选项并重新调用 `BitmapFactory.decodeResource()` 方法来加载图片到内存中。 注意,`calculateInSampleSize()` 方法需要自己实现。它的作用是根据目标宽度和高度计算出最接近的采样率。以下是一个示例实现: ```java private static int calculateInSampleSize(BitmapFactory.Options options, int reqWidth, int reqHeight) { final int height = options.outHeight; final int width = options.outWidth; int inSampleSize = 1; if (height > reqHeight || width > reqWidth) { final int halfHeight = height / 2; final int halfWidth = width / 2; while ((halfHeight / inSampleSize) >= reqHeight && (halfWidth / inSampleSize) >= reqWidth) { inSampleSize *= 2; } } return inSampleSize; } ``` 以上示例中,`calculateInSampleSize()` 方法会根据图片的宽度和高度以及目标宽度和高度计算出最接近的采样率。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值