下载点
http://httpd.apache.org/download.cgi
参考:
http://jingyan.baidu.com/article/e3c78d647a57833c4c85f502.html
ab的参数说明
-n 需要执行的请求次数
-c 并发的数量
-t 等待返回的最长时间
-b TCP收发缓冲区的大小,单位(byte)
-p 使用post (同时需要定义-T参数)
-u 使用put (同时需要定义-T参数)
-T content-type, 例如application/x-www-form-urlencoded, 默认为text/plain
-w 把结果打印在html的表格里
-x 表格的属性
-y tr行属性
-z td列属性
-C 设置cookie 例如Apach=1234
-H header行, 例如Accept-Encoding:gzip
-k 是否标示位HTTP Keep Alive
步骤:
1. 配置环境变量
配置完成
2. 下面就拿apache的一个静态页面做测试
测试command,
测试结果:
附:
测试页面如下
下面是带参数的请求,
如果是带有cookie的请求
param.txt
command:
最后查看html的测试结果
测试结果:
举例:
Concurrency Level: 10 // 并发数量
Time taken for tests: 1.074 seconds // 测试总时间
Complete requests: 100 // 请求总数
Failed requests: 97
(Connect: 0, Receive: 0, Length: 97, Exceptions: 0)
Total transferred: 10113449 bytes
HTML transferred: 10015078 bytes
Requests per second: 93.10 [#/sec] (mean) // 吞吐量(URL每秒能承受的访问次数)
Time per request: 107.409 [ms] (mean) // 用户等待时间(等于 服务器等待时间*并发数)
Time per request: 10.741 [ms] (mean, across all concurrent requests) // 服务器等待时间(即服务器完成一个请求————接受请求,处理请求,返回请求————所需要的时间)(与吞吐量互为倒数关系)(计算公式:服务器等待时间=测试总时间/请求总数)
Transfer rate: 9195.15 [Kbytes/sec] received
Connection Times (ms)
// min:最小值;mean:平均值;median:中位值;max:最大值;
min mean[+/-sd] median max
ApacheBench(ab)参数说明
格式:ab [options] [http://]hostname[:port]/path
参数说明:
-n requests Number of requests to perform
//在测试会话中所执行的请求个数(本次测试总共要访问页面的次数)。默认时,仅执行一个请求。
-c concurrency Number of multiple requests to make
//一次产生的请求个数(并发数)。默认是一次一个。
-t timelimit Seconds to max. wait for responses
//测试所进行的最大秒数。其内部隐含值是-n 50000。它可以使对服务器的测试限制在一个固定的总时间以内。默认时,没有时间限制。
-p postfile File containing data to POST
//包含了需要POST的数据的文件,文件格式如“p1=1&p2=2”.使用方法是 -p 111.txt 。 (配合-T)
-T content-type Content-type header for POSTing
//POST数据所使用的Content-type头信息,如 -T “application/x-www-form-urlencoded” 。 (配合-p)
-v verbosity How much troubleshooting info to print
//设置显示信息的详细程度 – 4或更大值会显示头信息, 3或更大值可以显示响应代码(404, 200等), 2或更大值可以显示警告和其他信息。 -V 显示版本号并退出。
-w Print out results in HTML tables
//以HTML表的格式输出结果。默认时,它是白色背景的两列宽度的一张表。
-i Use HEAD instead of GET
// 执行HEAD请求,而不是GET。
-x attributes String to insert as table attributes
-y attributes String to insert as tr attributes
-z attributes String to insert as td or th attributes
-C attribute Add cookie, eg. -C “c1=1234,c2=2,c3=3” (repeatable)
//-C cookie-name=value 对请求附加一个Cookie:行。 其典型形式是name=value的一个参数对。此参数可以重复,用逗号分割。
提示:可以借助session实现原理传递 JSESSIONID参数, 实现保持会话的功能,如
-C ” c1=1234,c2=2,c3=3, JSESSIONID=FF056CD16DA9D71CB131C1D56F0319F8″ 。
-H attribute Add Arbitrary header line, eg. ‘Accept-Encoding: gzip’ Inserted after all normal header lines. (repeatable)
-A attribute Add Basic WWW Authentication, the attributes
are a colon separated username and password.
-P attribute Add Basic Proxy Authentication, the attributes
are a colon separated username and password.
//-P proxy-auth-username:password 对一个中转代理提供BASIC认证信任。用户名和密码由一个:隔开,并以base64编码形式发送。无论服务器是否需要(即, 是否发送了401认证需求代码),此字符串都会被发送。
-X proxy:port Proxyserver and port number to use
-V Print version number and exit
-k Use HTTP KeepAlive feature
-d Do not show percentiles served table.
-S Do not show confidence estimators and warnings.
-g filename Output collected data to gnuplot format file.
-e filename Output CSV file with percentages served
-h Display usage information (this message)
//-attributes 设置属性的字符串. 缺陷程序中有各种静态声明的固定长度的缓冲区。另外,对命令行参数、服务器的响应头和其他外部输入的解析也很简单,这可能会有不良后果。它没有完整地实现 HTTP/1.x; 仅接受某些’预想’的响应格式。 strstr(3)的频繁使用可能会带来性能问题,即你可能是在测试ab而不是服务器的性能。