keepalived实现Tomcat服务双机热备

最新推荐文章于 2024-05-11 13:56:50 发布
最新推荐文章于 2024-05-11 13:56:50 发布
阅读量1.7w 收藏 14
点赞数 5
分类专栏： 系统架构 服务器搭建 网站架构相关技术 文章标签： tomcat keepalived
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/u013256816/article/details/49127995
版权 
欢迎支持笔者新作：《深入理解Kafka:核心设计与实践原理》和《RabbitMQ实战指南》，同时欢迎关注笔者的微信公众号：朱小厮的博客。

 

欢迎跳转到本文的原文链接：https://honeypps.com/backend/keepalived-tomacat-standby/

 

项目中需要采用tomcat双机热备机制，以确保系统性能。本人通过查阅资料以及亲自实现完成，写下这篇博文，供个人读者参考。

 

 

1. 规划

1.1服务器环境规划

负载服务器master及WEB服务器1真实IP：10.10.195.53

负载服务器backup及WEB服务器2真实IP：10.10.195.190

负载服务器虚拟ip：10.10.195.212

1.2 软件环境规划

操作系统：Red Hat Enterprise Linux Server release 5.6 (Tikanga)

keepalived：keepalived-1.2.19

Java：jdk-1.7.0_79

Tomcat：apache-tomcat-7.0.64

2. 负载服务器配置

这里只叙述如何安装配置keepalived，至于java以及tomcat的安装及配置，这里不赘述。

2.1 安装keepalived

 

[~]tar -zxvf keepalived-1.2.19.tar.gz
[~] cd keepalived-1.2.19
[keepalived-1.2.19] ./configure --prefix=/usr/local/keepalived --disable-fwmark
#(如果直接输入./configure有可能报错：configure:error: No SO_MARK declaration in headers)
[keepalived-1.2.19] make
[keepalived-1.2.19] make install


2.2 配置keepalived服务

 

 

[keepalived-1.2.19] cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
[keepalived-1.2.19] cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
[keepalived-1.2.19] cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
[keepalived-1.2.19] mkdir /etc/keepalived
[keepalived-1.2.19] cp /usr/local/keepalived/etc/keepalived/keepalived.conf/etc/keepalived/
[keepalived-1.2.19] chkconfig --add keepalived
[keepalived-1.2.19] chkconfig keepalived on


 重启\启动\关闭\查看状态keepalived

 

service keepalived restart

service keepalived start

service keepalived stop

service keepalived status

2.3 配置keepalived.conf文件

 

[~]mv /etc/keepalived/keepalived.conf/etc/keepalived/keepalived.conf.bak
[~]vi /etc/keepalived//keepalived.conf

 

主备机的keepalived.conf文件大致相同，只是注意红色标注的地方。

主机配置：

 

global_defs {
   router_id NodeA
}
vrrp_script chk_http_port {
   script "/opt/tomcat.pid"
   interval 5
   weight 2
}
vrrp_instance VI_1 {
   state MASTER
   interface eth0
   virtual_router_id 52
   priority 150
   advert_int 1
 
   authentication {
       auth_type PASS
       auth_pass 1111
    }
 
   track_script {
       chk_http_port
    }
 
   virtual_ipaddress {
       10.10.195.212
    }
}

 

备机配置：

 

global_defs {
   router_id NodeB
}
vrrp_script chk_http_port {
   script "/opt/tomcat.pid"
   interval 5
   weight 2
}
vrrp_instance VI_1 {
   state BACKUP
   interface eth0
   virtual_router_id 52
   priority 100
   advert_int 1
 
   authentication {
       auth_type PASS
       auth_pass 1111
    }
 
   track_script {
       chk_http_port
    }
 
   virtual_ipaddress {
       10.10.195.212
    }
}

 

2.4配置/opt/tomcat.pid

 

#!/bin/bash
#description: check tomcat service anddecide whether stop the keepalived or not
#edited by zzh: 2015-10-14
 
CATALINA_HOME=/users/shr/apache-tomcat-7.0.64
JAVA_HOME=/users/shr/util/JavaDir/jdk
export CATALINA_HOME
export JAVA_HOME
 
ps ax --width=1000 | grep"org.apache.catalina.startup.Bootstrap start" | grep -v"grep" | awk '{printf $1 " "}' | wc | awk '{print $2}' >tomcat_process_count.txt
read line < tomcat_process_count.txt
 
start_tomcat=$CATALINA_HOME/bin/startup.sh
 
if [ ${line} -lt 1 ]
then
       echo -n "===Starting tomcat===:"
       ${start_tomcat}
       # :sudo service tomcat start
       echo "===tomcat start ok.==="
       sleep 3
 
       # check the tomcat status.
       ps ax --width=1000 | grep "org.apache.catalina.startup.Bootstrapstart" | grep -v "grep" | awk '{printf $1 " "}' | wc |awk '{print $2}' > tomcat_process_count.txt
       read line2 < tomcat_process_count.txt
       if [ ${line2} -lt 1 ]
       then
                sudo service keepalived stop
       fi
fi
rm tomcat_process_count.txt
#shell end.

 

3. 日志查看

3.1 正常启动

输入tail -f /var/log/messages查看启动keepalived日志：

（MASTER：10.10.195.53）

 

Sep 29 15:49:16 shr Keepalived[5536]:Starting Keepalived v1.2.19 (09/21,2015)
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Netlink reflector reports IP 10.10.195.53added
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Netlink reflector reports IP 10.10.195.53added
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Registering Kernel netlink reflector
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Registering Kernel netlink command channel
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Opening file'/etc/keepalived/keepalived.conf'.
Sep 29 15:49:16 shrKeepalived_healthcheckers[5538]: Configuration is using : 6572 Bytes
Sep 29 15:49:16 shr Keepalived[5537]:Starting Healthcheck child process, pid=5538
Sep 29 15:49:16 shr Keepalived_healthcheckers[5538]:Using LinkWatch kernel netlink reflector...
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Netlink reflector reports IP 10.10.195.53 added
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Netlink reflector reports IP 10.10.195.53 added
Sep 29 15:49:16 shr Keepalived[5537]:Starting VRRP child process, pid=5539
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Registering Kernel netlink reflector
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Registering Kernel netlink command channel
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Registering gratuitous ARP shared channel
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Opening file '/etc/keepalived/keepalived.conf'.
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Configuration is using : 36541 Bytes
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:Using LinkWatch kernel netlink reflector...
Sep 29 15:49:16 shr Keepalived_vrrp[5539]:VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(10,11)]
Sep 29 15:49:17 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Transition to MASTER STATE
Sep 29 15:49:17 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Received lower prio advert, forcing new election
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Entering MASTER STATE
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) setting protocol VIPs.
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.195.212
Sep 29 15:49:18 shr Keepalived_vrrp[5539]:Netlink reflector reports IP 10.10.195.212 added
Sep 29 15:49:18 shrKeepalived_healthcheckers[5538]: Netlink reflector reports IP 10.10.195.212added
Sep 29 15:49:23 shr Keepalived_vrrp[5539]:VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for 10.10.195.212

 

(BACKUP:10.10.195.190)

 

Sep 29 15:46:25 server1 Keepalived[18218]:Starting Keepalived v1.2.19 (09/25,2015)
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Netlink reflector reports IP 10.10.195.190added
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Netlink reflector reports IP 10.10.195.190added
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Registering Kernel netlink reflector
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Registering Kernel netlink command channel
Sep 29 15:46:25 server1 Keepalived_healthcheckers[18220]:Opening file '/etc/keepalived/keepalived.conf'.
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Configuration is using : 6682 Bytes
Sep 29 15:46:25 server1 Keepalived[18219]:Starting Healthcheck child process, pid=18220
Sep 29 15:46:25 server1 Keepalived[18219]:Starting VRRP child process, pid=18221
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Netlink reflector reports IP 10.10.195.190 added
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Netlink reflector reports IP 10.10.195.190 added
Sep 29 15:46:25 server1Keepalived_healthcheckers[18220]: Using LinkWatch kernel netlink reflector...
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Registering Kernel netlink reflector
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Registering Kernel netlink command channel
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Registering gratuitous ARP shared channel
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Opening file '/etc/keepalived/keepalived.conf'.
Sep 29 15:46:25 server1 Keepalived_vrrp[18221]:Configuration is using : 36651 Bytes
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: Using LinkWatch kernel netlink reflector...
Sep 29 15:46:25 server1Keepalived_vrrp[18221]: VRRP_Instance(VI_1) Entering BACKUP STATE
Sep 29 15:46:25 server1 Keepalived_vrrp[18221]:VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(10,11)]

 

3.2 主备切换

l  当在主机（MASTER：10.10.195.53）中输入 sudoservice keepalived stop，此时就会进行主备切换，主机切换成备机。

主机（MASTER：10.10.195.53）输出如下

 

Oct 14 13:25:09 shr Keepalived_vrrp[26683]:VRRP_Instance(VI_1) sending 0 priority
Oct 14 13:25:09 shr Keepalived_vrrp[26683]:VRRP_Instance(VI_1) removing protocol VIPs.
Oct 14 13:25:09 shrKeepalived_healthcheckers[26682]: Netlink reflector reports IP 10.10.195.212removed
Oct 14 13:25:09 shr Keepalived[26681]:Stopping Keepalived v1.2.19 (09/21,2015)

 

备机(BACKUP:10.10.195.190)输出如下

 

Oct 14 13:19:58 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Transition to MASTER STATE
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Entering MASTER STATE
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) setting protocol VIPs.
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for10.10.195.212
Oct 14 13:19:59 server1 Keepalived_healthcheckers[30889]:Netlink reflector reports IP 10.10.195.212 added
Oct 14 13:19:59 server1Keepalived_vrrp[30890]: Netlink reflector reports IP 10.10.195.212 added
Oct 14 13:20:04 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Sending gratuitous ARPs on eth0 for10.10.195.212

 

l  当在主机（MASTER：10.10.195.53）中输入sudoservice keepalived start,此时就会切换成主机。备机(BACKUP:10.10.195.190)输出如下信息：

 

Oct 14 13:25:11 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Received higher prio advert
Oct 14 13:25:11 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) Entering BACKUP STATE
Oct 14 13:25:11 server1Keepalived_vrrp[30890]: VRRP_Instance(VI_1) removing protocol VIPs.
Oct 14 13:25:11 server1Keepalived_healthcheckers[30889]: Netlink reflector reports IP 10.10.195.212removed
Oct 14 13:25:11 server1Keepalived_vrrp[30890]: Netlink reflector reports IP 10.10.195.212 removed

 

4. 查看虚拟ip

可以通过ip add show命令查看添加的虚拟ip：

 

[shr@shr bin]$ip add show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu16436 qdisc noqueue
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
2: eth0:<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 00:0c:29:6b:f2:a8 brd ff:ff:ff:ff:ff:ff
   inet 10.10.195.53/24 brd 10.10.195.255 scope global eth0
   inet 10.10.195.212/32scope global eth0

 

5. 常见错误

5. 1常见错误一：

 

/var/log/messages has thousands of errorslike this:
 
Jun 28 09:18:32 rust Keepalived_vrrp:receive an invalid ip number count
associated with VRID!
Jun 28 09:18:32 rust Keepalived_vrrp: bogusVRRP packet received on eth0 !!!
Jun 28 09:18:32 rust Keepalived_vrrp:VRRP_Instance(VI_1) Dropping received
VRRP packet...
 
The backup director starts up, but doesn'tlisten on the virtual addresses
at all. Its /var/log/messages has thousands of errors like this:
 
Jun 28 06:25:05 stye Keepalived_vrrp:receive an invalid ip number count
associated with VRID!
Jun 28 06:25:05 stye Keepalived_vrrp: bogusVRRP packet received on eth0 !!!
Jun 28 06:25:05 stye Keepalived_vrrp:VRRP_Instance(VI_1) ignoring received
advertisment...<span style="font-family: Arial, Helvetica, sans-serif; background-color: rgb(255, 255, 255);"> </span>

 

解决方法：

改变配置文件/etc/keepalived/keepalived.conf中virtual_router_id为另一个值即可。

（changed the vrid to another number and it worked fine）.

5.2 常见错误二：

主机执行到VRRP_Instance(VI_1) Entering BACKUP STATE之后没有执行VRRP_Instance(VI_1)setting protocol VIPs。

解决方法：

可能是配置文件keepalived.conf中{左边没有空格。

 

附

linux添加tomcat服务

在/etc/init.d中输入 sudo vim tomcat

脚本具体内容如下：

 

#!/bin/bash
#chkconfig: 2345 10 90
#description: Starts and Stops the tomcatdaemon
#edited by ZZH: 2015-10-14
 
CATALINA_HOME=/users/shr/apache-tomcat-7.0.64
JAVA_HOME=/users/shr/util/JavaDir/jdk
export CATALINA_HOME
export JAVA_HOME
 
start_tomcat=$CATALINA_HOME/bin/startup.sh
stop_tomcat=$CATALINA_HOME/bin/shutdown.sh
 
if [ ! -f $CATALINA_HOME/bin/catalina.sh ]
then
         echo"===Tomcat is not available.==="
         exit
fi
 
start()
{
         echo-n "===Starting tomcat===:"
         ${start_tomcat}
         echo"===tomcat start ok.==="
}
 
stop()
{
         echo-n "===Shutting down tomcat===:"
         ${stop_tomcat}
         echo"===tomcat stop ok.==="
}
 
status()
{
         ps ax --width=1000 | grep"org.apache.catalina.startup.Bootstrap start" | grep -v"grep" | awk '{printf $1 " "}' | wc | awk '{print $2}'> tomcat_process_count.txt
         readline < tomcat_process_count.txt
         rmtomcat_process_count.txt
         if[ $line -gt 0 ]
                   then
                            echo-n "tomcat ( pid = "
                            ps ax --width=1000 | grep"org.apache.catalina.startup.Bootstrap start" | grep -v"grep" | awk '{printf $1 " "}' | awk '{print $1}'> tomcat_process_pid.txt
                            readpid < tomcat_process_pid.txt
                            rmtomcat_process_pid.txt
                            echo-n $pid
                            echo-n ") is running..."
                            echo
                   else
                            echo"tomcat is stopped"
         fi
}
 
case "$1" in
         start)
                   start
                   ;;
         stop)
                   stop
                   ;;
         restart)
                   stop
                   sleep1
                   start
                   ;;
         status)
                   status
                   ;;
         *)
                   echo"Usage:$0 {start|stop|restart}"
                   exit1
esac
 
exit 0
# shell end.

 

在终端输入:

 

sudo chmod 755 tomcat
sudo chkconfig --add tomcat

 

 

 

tomcat 启动 service tomcatstart

tomcat 关闭 service tomcatstop

tomcat 重启 service tomcatrestart

tomcat状态查看 service tomcatstatus

 

欢迎跳转到本文的原文链接：https://honeypps.com/backend/keepalived-tomacat-standby/

 

欢迎支持笔者新作：《深入理解Kafka:核心设计与实践原理》和《RabbitMQ实战指南》，同时欢迎关注笔者的微信公众号：朱小厮的博客。

朱小厮
关注
  • 5
    点赞
  • 踩
  • 14
    收藏
    觉得还不错? 一键收藏
  • 4
    评论
专栏目录
linux 安装keepalived,Keepalived的安装与配置
weixin_33803878的博客
05-26 970
1. Keepalived的安装1.1. yum install方式yum install -y keepalived1.2. 安装包编译方式wget http://www.keepalived.org/software/keepalived-2.0.7.tar.gztar zxvf keepalived-2.0.7.tar.gzcd keepalived-2.0.7./configure --b...
keepalived + redis 实现双机热备
04-23
标题 "keepalived + redis 实现双机热备" 涉及到的是在IT行业中构建高可用性系统的关键技术。keepalived 和 redis 是两个关键组件，它们一起工作以确保服务的持续运行，即使在主服务器故障时也能无缝切换到备份...
apache+tomcat负载均衡和双机热备
天涯
04-14 977
领取阿里云2000元大红包 一般来说，负载均衡就是将客户端的请求分流给后端的各个真实服务器，达到负载均衡的目的。还有一种方式是用两台服务器，一台作为主服务器(Master)，另一台作为热备份(Hot Standby)，请求全部分给主服务器，在主服务器当机时，立即切换到备份服务器，以提高系统的整体可靠性。也可以在一台机器上启动两个TOMCAT，当一个服务器DONW机可以切换至另一个服务器。 ...
Received lower prio advert, forcing new election (KEEP ALIVED)
海鲨MYSQL精英架构师
11-03 4811
最近测试服务器掉电,KEEPAVIED的VIP转移实验新服务器掉电重启后 发现 主KEEPALIVED 抢不过备库/VAR/LOG/MESSAGES  看到 Received lower prio advert, forcing new election折腾下 发现 主库的防火墙启动了.检测 NGINX的服务的脚本  老是不被KEEPALIVED 调用. 手工执行则可以,都是root 用户.发现
Java最新keepalived实现httpd负载均衡机高可用(2)，java开发岗高频面试题
最新发布
pCITv1C的博客
05-11 694
无论是哪家公司，都很重视基础，大厂更加重视技术的深度和广度，面试是一个双向选择的过程，不要抱着畏惧的心态去面试，不利于自己的发挥。同时看中的应该不止薪资，还要看你是不是真的喜欢这家公司，是不是能真的得到锻炼。针对以上面试技术点，我在这里也做一些分享，希望能更好的帮助到大家。本文已被CODING开源项目：【一线大厂Java面试题解析+核心总结学习笔记+最新讲解视频+实战项目源码】收录需要这份系统化的资料的朋友，可以点击这里获取t {lb_algo rrlb_kind DRweight 1。
nginx实现请求的负载均衡 + keepalived实现nginx的高可用
weixin_30740581的博客
08-09 374
前言 　　使用集群是网站解决高并发、海量数据问题的常用手段。当一台服务器的处理能力、存储空间不足时，不要企图去换更强大的服务器，对大型网站而言，不管多么强大的服务器，都满足不了网站持续增长的业务需求。这种情况下，更恰当的做法是增加一台服务器分担原有服务器的访问及存储压力。通过负载均衡调度服务器，将来自浏览器的访问请求分发到应用服务器集群中的任何一台服务器上，如果有更多的用户，就在集群中加入更多的...
记一次keepalived的异常问题
liuxz2016的博客
04-01 1293
背景：2019一月份我对我们项目的开发环境及测试环境，做了一次数据库灾备及高可用方案，MYSQL采用的是主主复制+keepalived机制（虚拟IP采用的是：xxx：xxx：xxx：225），MongoDB采用的是复制集模式。 问题：从1月20号上测试环境至3月27都没出现任何问题。结果3月28日早上，相继有人告诉我，虚拟IPxxx：xxx：xxx：225无法使用。 现象：1.xxx：xxx：...
Nginx+keepalived双机热备（主从模式）
01-19
因此，keepalived通常用于实现前端高可用，而heartbeat和corosync则用于实现服务的高可用。 Nginx+keepalived双机热备（主从模式）技术可以实现高可用的Web服务器集群，避免单点故障，保证网站的健康持续运行。在...
Nginx+Keepalived实现双机热备
09-30
【Nginx+Keepalived实现双机热备】 在高可用性系统设计中，双机热备是一种常见的策略，可以确保服务在一台服务器故障时能够无缝切换到另一台服务器，从而保持系统的不间断运行。Nginx是一款高性能的HTTP和反向代理...
linux基于keepalived的mysql双机热备实现方案（详细过程完整版）
03-27
linux下基于keepalived的mysql双机热备实现方案，本文档用于实现mysql数据库双机热备灾备方案，在系统部署过程中还需仔细认真，有时候一个小小的配置错误就可能导致部署失败，本人在此套技术验证过程中也踩了不少坑...
linux tomcat 高可用性,Keepalived+Nginx+Tomcat高可用（主从切换）以及灾难恢复
weixin_29344197的博客
04-30 201
思路首先看下整体的思路 解释说明：由于本示例不是为了做业务的集群部署，所以每台ngix都是直接到一台具体的tomcat上，所以这两个tomcat都是独立的并不是集群，而在实际上tomcat应该是借助第三方的rpc框架的业务集群。本文主要是介绍keepalived和nginx的搭建以及灾难恢复。nginx的安装server {listen 80;server_name mini03;#...
keepalived&tomcat;代码与脚本
01-30
keepalived，redis，tomcat，nginx 找了好久，现分享一下，大家有兴趣的可以下载看看。。。。
入门级linux,nginx,tomcat,keepalived详细安装教程.zip
01-07
入门级linux,nginx,tomcat,keepalived详细安装教程.zip linux各目录的含义 安装nginx,反向代理负载均衡 linux下运行多个tomcat linux安装keepalived实现HA高可用
虚拟机配置+群集配置+tomcat服务器实现双机热备
09-08
虚拟机配置+群集配置+tomcat服务器实现双机热备
使用keepalived监控tomcat 达到双机热备
weixin_30492047的博客
12-05 208
　　通常说的双机热备是指两台机器都在运行，但并不是两台机器都同时在提供服务。　　当提供服务的一台出现故障的时候，另外一台会马上自动接管并且提供服务，而且切换的时间非常短。下面来以keepalived结合tomcat来实现一个web服务器的双机热备。　　keepalived的工作原理是VRRP（Virtual Router Redundancy Protocol）虚拟路由冗余协议。在VRRP中有两组...
keepalived+nginx+tomcat高可用（主从切换）以及灾难恢复
tianjun2012的专栏
12-02 4226
思路首先看下整体的思路
Keepalived+nginx高可用及+Tomcat负载均衡集群以及动静分离
云深海阔专栏
06-05 3327
概括：主要是利用keepalived做nginx的高可用 再用nginx做tomcat Web的负载均衡。总体拓扑图如下： 高可用部分第一步：安装部署nginx[root@localhost ~]# useradd nginx -s /sbin/nologin -M[root@localhost ~]# tar -xf nginx-1.13.8.tar.gz[root@localhost ~]# ...
nginx+tomcat实现负载均衡以及双机热备
鹿慕溪水的博客
05-10 8403
Java技术交流群：817997079，欢迎“有志之士”的加入。 大家都知道nginx可以代理多台服务器（以tomcat为例），那么当被nginx代理的tomcat服务器宕机时，我们怎么保证客户端能继续访问系统？接下来就说一下nginx在实现负载均衡的同时，被代理的服务器宕机怎么无痛的让客户端继续访问到我们的项目。 1.首先在nginx的文件目录里找到nginx-conf文件，这是nginx的...
apache+tomcat实现热备
10-19 532
在apache的配置文件httpd.conf中开启以下模块 LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_http_module modules/mod_proxy_http.so
keepalived双机热备配置
09-06
在使用keepalived实现双机热备的配置中，首先需要了解keepalived的基础知识。然后，你可以通过控制keepalived服务来配置双机热备。可以使用systemctl命令来启用keepalived服务，确保在系统启动时自动启动keepalived...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 4
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值