原文地址::http://blog.csdn.net/u011574686/article/details/53260192
stm8S 串口输出调试信息
自己写的API函数
[],
< ++
[]
,
++
[],
[]
, ,
< ++
[]
<
[++]
- > --
[] +
+ ,
[],
[]
, ,
< ++
[]
<
[++]
- > --
[] +
+ ,
[],
[]
, ,
< ++
[]
<
[++]
- > --
[] +
+ ,
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
上述方法相对笨一点,而且无法打印负数,浮点数。下面直接使用printf标准输入输出函数,将调试信息串口打印出来。
printf 函数重映射
使用printf函数将调试信息用串口打印出来,首先在有printf函数的C文件下包含 #include <stdio.h>
,其次将printf函数重定向串口输出1, 参考网址1。贴代码:
重映射代码,myPrintf.c
#include "stm8s.h"
#include <stdio.h>
#ifdef _RAISONANCE_
#define PUTCHAR_PROTOTYPE int putchar (char c)
#define GETCHAR_PROTOTYPE int getchar (void)
#elif defined (_COSMIC_)
#define PUTCHAR_PROTOTYPE char putchar (char c)
#define GETCHAR_PROTOTYPE char getchar (void)
#else /* _IAR_ */
#define PUTCHAR_PROTOTYPE int putchar (int c)
#define GETCHAR_PROTOTYPE int getchar (void)
#endif /* _RAISONANCE_ */
PUTCHAR_PROTOTYPE
{
UART1_SendData8(c);
while (UART1_GetFlagStatus(UART1_FLAG_TXE) == RESET);
return (c);
}
GETCHAR_PROTOTYPE
{
#ifdef _COSMIC_
char c = 0;
#else
int c = 0;
#endif
while (UART1_GetFlagStatus(UART1_FLAG_RXNE) == RESET);
c = UART1_ReceiveData8();
return (c);
}
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
main.c 主要输出部分:
#include <stdio.h>
void main(void)
{
myUart1Init (115200);
printf ("STM8S Start.\r\n");
while(1)
{
}
}