IRF+链路聚合+vlan

拓扑图

任务：PC1 ping 通PC3 PC2 ping 通PC4

1.配置IRF

1.先配置pc1，pc2的IP地址，子网掩码，DNS
PC1:
192.168.1.1
255.255.255.0
PC2：
192.168.1.2
255.255.255.0
PC3：
192.168.1.11
255.255.255.0
PC4：
192.168.1.12
255.255.255.0

 

2.配置SWA&SWB IRF堆叠
在SWA上的配置：
<SWA>system-view
[SWA] interface range ten-gigabitethernet 1/0/49 to ten-gigabitethernet 1/0/50
[SWA-if-range] shutdown
[SWA-if-range] quit
[SWA] irf-port 1/1
[SWA-irf-port1/1] port group interface ten-gigabitethernet 1/0/49
[SWA-irf-port1/1] port group interface ten-gigabitethernet 1/0/50
[SWA-irf-port1/1]quit
[SWA] interface range ten-gigabitethernet 1/0/49 to ten-gigabitethernet 1/0/50
[SWA-if-range] undo shutdown
[SWA-if-range] quit
[SWA] save
[SWA] irf-port-configuration acive

在SWB上的配置：
<SWB> sys
[SWB] irf member 1 renumber 2
[SWB] quit
<SWB> reboot
[SWB] interface range ten-gigabitethernet 2/0/49 to ten-gigabitethernet 2/0/50
[SWB-if-range] shutdown
[SWB-if-range] quit
[SWB] irf-port 2/2
[SWB -irf-port1/1] port group interface ten-gigabitethernet 2/0/49
[SWB -irf-port1/1] port group interface ten-gigabitethernet 2/0/50
[SWB -irf-port1/1]quit
[SWB] interface range ten-gigabitethernet 2/0/49 to ten-gigabitethernet 2/0/50
[SWB-if-range] undo shutdown
[SWB -if-range] quit
[SWB] save
[SWB] irf-port-configuration acive

3.创建链路聚合
配置SWC：
Interface bridge-aggregation 1
Quit
Interface range g1/0/5 to g1/0/6
Port link-aggregation group 1
配置SWD：
Interface bridge-aggregation 2
Quit
Interface range g1/0/5 to g1/0/6
Port link-aggregation group 2

在SWA上也配置链路聚合：
Interface bridge-aggregation 1
quit
Interface	g1/0/5
Port link-aggregation group 1
Quit
Interface	g2/0/5
Port link-aggregation group 1
Quit
Interface bridge-aggregation 2
Quit
Interface	g1/0/6
Port link-aggregation group 2
Quit
Interface	g2/0/6
Port link-aggregation group 2

4.配置PC1和PC2
SWC：
Vlan 10
Port g1/0/1
Vlan 20
Port g1/0/11
Interface bridge-aggregation 1
Port link-type trunk
Port trunk permit vlan 10 20

SWD:
Vlan 10
Port g1/0/1
Vlan 20
Port g1/0/11
Interface bridge-aggregation 2
Port link-type trunk
Port trunk permit vlan 10 20

配置SWA：
Vlan 10
Quit
Vlan 20
Interface bridge-aggregation 1
Port link-type trunk
Port trunk permit vlan 10 20
Interface bridge-aggregation 2
Port link-type trunk
Port trunk permit vlan 10 20

5.测试
PC1 ping PC3
PC2 ping PC4