串口复习（串口数据包）（12.1）

发送一堆数据（数据包）（我们使用额外添加包头和包尾）

固定包长

解决误判情况（发送数据本身就跟包头包尾重叠）

1、限制载荷数据的范围

2、尽量使用固定长度的数据包

3、增加包头包尾的数量，避免重复

文本数据包，一般用换行作为包尾

状态机思维

串口收发HEX数据工具包

main.c

#include "stm32f10x.h"                  // Device header
#include "Delay.h"
#include "OLED.h"
#include "Serial.h"
#include "key.h"

uint8_t KeyNum;

int main(void)
{
	OLED_Init();
	Key_Init();
	Serial_Init();

	OLED_ShowString(1,1,"TxPacket");
	OLED_ShowString(3,1,"RxPacket");
	
	Serial_TxPacket[0]=0x01;
	Serial_TxPacket[1]=0x02;
	Serial_TxPacket[2]=0x03;
	Serial_TxPacket[3]=0x04;
	
	
	while (1)
	{
		KeyNum = Key_GetNum();
		if(KeyNum==1)
		{
			Serial_TxPacket[0]++;
			Serial_TxPacket[1]++;
			Serial_TxPacket[2]++;
			Serial_TxPacket[3]++;
			
			Serial_SendPacket();
			
			OLED_ShowHexNum(2,1,Serial_RxPacket[0],2);
			OLED_ShowHexNum(2,4,Serial_RxPacket[1],2);
			OLED_ShowHexNum(2,7,Serial_RxPacket[2],2);
			OLED_ShowHexNum(2,10,Serial_RxPacket[3],2);

			
			
		}
		if(Serial_GetRxFlag()==1)
		{
			OLED_ShowHexNum(4,1,Serial_RxPacket[0],2);
			OLED_ShowHexNum(4,4,Serial_RxPacket[1],2);
			OLED_ShowHexNum(4,7,Serial_RxPacket[2],2);
			OLED_ShowHexNum(4,10,Serial_RxPacket[3],2);
			
		}
	}
}

串口收发文本数据工具包

main.c

#include "stm32f10x.h"                  // Device header
#include "Delay.h"
#include "OLED.h"
#include "Serial.h"
#include "LED.h"
#include <string.h>


int main(void)
{
	OLED_Init();
	LED_Init();
	Serial_Init();
	
	OLED_ShowString(1, 1, "TxPacket");
	OLED_ShowString(3, 1, "RxPacket");
	
	
	while (1)
	{
		if(Serial_GetRxFlag()==1)
		{
		OLED_ShowString(4,1,"                ");
		OLED_ShowString(4,1,Serial_RxPacket);
		
		if(strcmp(Serial_RxPacket,"LED_ON")==0)
		{
		LED1_ON();
		Serial_SendString("LED_ON_OK\r\n");
		OLED_ShowString(2,1,"                ");
		OLED_ShowString(2,1,"LED_ON_OK");
		}
			else if(strcmp(Serial_RxPacket,"LED_OFF")==0)
		{
		LED1_OFF();
		Serial_SendString("LED_OFF_OK\r\n");
		OLED_ShowString(2,1,"                ");
		OLED_ShowString(2,1,"LED_OFF_OK");
		}
		else
		{
		Serial_SendString("ERROR_COMMAND\r\n");
		OLED_ShowString(2,1,"                ");
		OLED_ShowString(2,1,"ERROR_COMMAND");
		}
		
	}
		
		if (Serial_GetRxFlag() == 1)
		{
			OLED_ShowHexNum(4, 1, Serial_RxPacket[0], 2);
			OLED_ShowHexNum(4, 4, Serial_RxPacket[1], 2);
			OLED_ShowHexNum(4, 7, Serial_RxPacket[2], 2);
			OLED_ShowHexNum(4, 10, Serial_RxPacket[3], 2);
		}
	}

}