RIP环境下的MGRE实验

实验题目及要求：

1.R5为ISP，只能进行IP地址配置，其所有地址均配为公有IP地址
2.R1和R5间使用PPP的PAP认证，R5为主认证方;
  R2于R5之间使用PPP的chap认证，R5为主认证方；
  R3于R5之间使用HDLC封装。
3.R1/R2/R3构建一个MGRE环境，R1为中心站点，R1、R4间为点到点的GRE
4.整个私有网络基于RIP全网可达
5.所有pc设置私有IP为源IP，可以访问R5环回，达到全网通

1、接口配ip

R1：

[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[R1-GigabitEthernet0/0/0]int serial 4/0/0
[R1-Serial4/0/0]ip add 15.0.0.1 24

R2,R3,R4同理配置

R5：

[R5]int g 0/0/0
[R5-GigabitEthernet0/0/0]ip add 45.0.0.2  24
[R5-GigabitEthernet0/0/0]int serial 4/0/0
[R5-Serial4/0/0]ip add 35.0.0.2 24
[R5-Serial4/0/0]int serial 4/0/1
[R5-Serial4/0/1]ip add 15.0.0.2 24
[R5-Serial4/0/1]int serial 3/0/1
[R5-Serial3/0/1]ip add 25.0.0.2 24

[R5]int l0
[R5-LoopBack0]ip add 5.5.5.5 24

2、R1，R2，R3，R4配缺省路由

[R1]ip route-static 0.0.0.0 0 15.0.0.2

[R2]ip route-static 0.0.0.0 0 25.0.0.2

[R3]ip route-static 0.0.0.0 0 35.0.0.2

[R4]ip route-static 0.0.0.0 0 45.0.0.2

3、配置NAT进行地址转换

R1：
[R1]acl 2000
[R1-acl-basic-2000]rule 1 permit source any
[R1-acl-basic-2000]q
[R1]int s 4/0/0
[R1-Serial4/0/0]nat outbound 2000

R2,R3,R4同理配置

4、R1和R5间使用PPP的PAP认证，R5为主认证方主认证方：

主认证方R5：

[R5]aaa
[R5-aaa]loca    
[R5-aaa]local-user r5 password cipher 123456
Info: Add a new user.
[R5-aaa]local-user r5 service-type ppp
[R5-aaa]q
[R5]int s 3/0/0
[R5-Serial3/0/0]ppp authentication-mode pap

被认证方R1：

[R1]int s 4/0/0
[R1-Serial4/0/0]ppp pap local-user r1 password cipher 123456 

5、R2与R5之间使用ppp的chap认证

主认证方R5：

[R5]aaa  
[R5-aaa]local-user r5 password cipher 123456
Info: Add a new user. 
[R5-aaa]local-user r5 service-type ppp
[R5-aaa]q
[R5]int s 3/0/1
[R5-Serial3/0/1]ppp authentication-mode chap

被认证方R2：

[R2]int s 4/0/0
[R2-Serial4/0/0]ppp chap user r5
[R2-Serial4/0/0]ppp chap password cipher 123456

6、R3于R5之间使用HDLC封装

R3：
[R3]int s 4/0/0
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]:y

R5：
[R5]int s 4/0/0
[R5-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]:y

7、R1/R2/R3构建一个MGRE环境，R1为中心站点，R1、R4间为点到点的GRE

MGRE的环境搭建

R1：
[R1]int t 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.0.0.1
Mar 30 2024 14:39:20-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R1-Tunnel0/0/0]nhrp network-id 100

R2：
[R2]int t 0/0/0
[R2-Tunnel0/0/0]ip add 10.1.1.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source s 4/0/0
Mar 30 2024 14:46:07-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state.
[R2-Tunnel0/0/0]nhrp entry 10.1.1.1 15.0.0.1 register 

图片

R3：
[R3]int t 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source s 4/0/0
Mar 30 2024 14:48:29-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.0.0.1 register

GRE环境的搭建

R1：
[R1]int t 0/0/1
[R1-Tunnel0/0/1]ip add 20.1.1.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.0.0.1
[R1-Tunnel0/0/1]destination 45.0.0.1
Mar 30 2024 14:55:34-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 

R4：
[R4]interface Tunnel 0/0/1
[R4-Tunnel0/0/1]ip address 20.1.1.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre  
[R4-Tunnel0/0/1]source 45.0.0.1
[R4-Tunnel0/0/1]destination 15.0.0.1
Mar 30 2024 14:59:22-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/1 has entered the UP state. 

8、整个私有网络基于RIP全网可达

R1：
[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 10.0.0.0
[R1-rip-1]network 20.0.0.0
[R1-rip-1]q
[R1]int t 0/0/0
[R1-Tunnel0/0/0]nhrp entry multicast dynamic 
[R1-Tunnel0/0/0]undo rip split-horizon 

R2：
[R2]rip 1
[R2-rip-1]version 2
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 10.0.0.0

R3：[R3]rip
[R3-rip-1]version 2
[R3-rip-1]network 192.168.3.0
[R3-rip-1]network 10.0.0.0

R4：
[R4]rip 1
[R4-rip-1]version 2
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 20.0.0.0

9、所有pc设置私有IP为源IP，可以访问R5环回

其余同理配置

10、ping，查看是否全网可达

思维导图