<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname s1
[s1]vlan b
[s1]vlan batch 10 20 30 40 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[s1]
User interface con0 is available
Please Press ENTER.
<s1>u t m
Info: Current terminal monitor is off.
<s1>sy
<s1>system-view
Enter system view, return user view with Ctrl+Z.
[s1]port-g 1
[s1-port-group-1]gr g0/0/1 to g0/03
^
Error: Wrong parameter found at '^' position.
[s1-port-group-1]p l t
[s1-port-group-1]gr g 0/0/1 to g 0/0/3
[s1-port-group-1]p l t
[s1-GigabitEthernet0/0/1]p l t
[s1-GigabitEthernet0/0/2]p l t
[s1-GigabitEthernet0/0/3]p l t
[s1-port-group-1]p t a v a
[s1-GigabitEthernet0/0/1]p t a v a
[s1-GigabitEthernet0/0/2]p t a v a
[s1-GigabitEthernet0/0/3]p t a v a
[s1-port-group-1]int g0/0/4
^
Error: Unrecognized command found at '^' position.
[s1-port-group-1]q
[s1]int g 0/0/4
[s1-GigabitEthernet0/0/4]p l q
^
Error:Ambiguous command found at '^' position.
[s1-GigabitEthernet0/0/4]q
[s1]int v 10
[s1-Vlanif10]ip ad
[s1-Vlanif10]ip address 192.168.10.2 24
[s1-Vlanif10]q
[s1]ping 192.168.10.2
PING 192.168.10.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.10.2: bytes=56 Sequence=1 ttl=255 time=1 ms
Reply from 192.168.10.2: bytes=56 Sequence=2 ttl=255 time=1 ms
Reply from 192.168.10.2: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 192.168.10.2: bytes=56 Sequence=4 ttl=255 time=10 ms
Reply from 192.168.10.2: bytes=56 Sequence=5 ttl=255 time=10 ms
--- 192.168.10.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/10/30 ms
[s1]ping 192.168.10.1
PING 192.168.10.1: 56 data bytes, press CTRL_C to break
Reply from 192.168.10.1: bytes=56 Sequence=1 ttl=255 time=60 ms
Reply from 192.168.10.1: bytes=56 Sequence=2 ttl=255 time=50 ms
Reply from 192.168.10.1: bytes=56 Sequence=3 ttl=255 time=40 ms
Reply from 192.168.10.1: bytes=56 Sequence=4 ttl=255 time=10 ms
Reply from 192.168.10.1: bytes=56 Sequence=5 ttl=255 time=50 ms
--- 192.168.10.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/42/60 ms
[s1]int g 0/0/4
[s1-GigabitEthernet0/0/4]p la
Error: Unknown host la.
[s1-GigabitEthernet0/0/4]p la
Error: Unknown host la.
[s1-GigabitEthernet0/0/4]p l a
[s1-GigabitEthernet0/0/4]p d v 100
[s1-GigabitEthernet0/0/4]q
[s1]int v 20
[s1-Vlanif20]ip add
[s1-Vlanif20]ip address 192.168.20.1 24
[s1-Vlanif20]int v 30
[s1-Vlanif30]ip add
[s1-Vlanif30]ip address 192.168.30.1 24
[s1-Vlanif30]int v 40
[s1-Vlanif40]ip add
[s1-Vlanif40]ip address 192.168.40.1 24
[s1-Vlanif40]q
[s1]int v 10
[s1-Vlanif10]q
[s1]int vlan 10
[s1-Vlanif10]vrrp v
[s1-Vlanif10]vrrp vrid 10 v
[s1-Vlanif10]vrrp vrid 10 virtual-ip 192.168.10.254
[s1-Vlanif10]vrrp v
[s1-Vlanif10]vrrp vrid 10 p
[s1-Vlanif10]vrrp vrid 10 pri
[s1-Vlanif10]vrrp vrid 10 priority 120
[s1-Vlanif10]int v 20
[s1-Vlanif20]vrrp vrid 20 vi
[s1-Vlanif20]vrrp vrid 20 virtual-ip 192.168.20.254
[s1-Vlanif20]int v 30
[s1-Vlanif30]vrrp vird 30 vir
[s1-Vlanif30]vrrp vird 30 virtual-ip 192.168.30.254
^
Error: Unrecognized command found at '^' position.
[s1-Vlanif30]q
[s1]int v 30
[s1-Vlanif30]vrrp vird 30 vi
[s1-Vlanif30]vrrp vird 30 virtual-ip 192.168.30.254
^
Error: Unrecognized command found at '^' position.
[s1-Vlanif30]int v 40
[s1-Vlanif40]int v30
[s1-Vlanif30]vrrp vrid 30 vir
[s1-Vlanif30]vrrp vrid 30 virtual-ip 192.168.30.254
[s1-Vlanif30]int v 40
[s1-Vlanif40]vrrp vrid 40 vi
[s1-Vlanif40]vrrp vrid 40 virtual-ip 192.168.40.254
<Huawei>
<Huawei>sy
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy s2
[s2]
Jun 27 2023 19:48:12-08:00 s2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.
[s2]
<s2>u t m
Info: Current terminal monitor is off.
<s2>sy
<s2>system-view
Enter system view, return user view with Ctrl+Z.
[s2]vlan b
[s2]vlan batch 10 20 30 40 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[s2] User interface con0 is available
Please Press ENTER.
<s2>u t m
Info: Current terminal monitor is off.
<s2>sy
Enter system view, return user view with Ctrl+Z.
[s2]sy
[s2]sysname
^
Error:Incomplete command found at '^' position.
[s2]port g 1
^
Error:Ambiguous command found at '^' position.
[s2]port-g 1
[s2-port-group-1]gr g 0/0/1 to g 0/0/3
[s2-port-group-1]p l t
[s2-GigabitEthernet0/0/1]p l t
[s2-GigabitEthernet0/0/2]p l t
[s2-GigabitEthernet0/0/3]p l t
[s2-port-group-1]p t a v a
[s2-GigabitEthernet0/0/1]p t a v a
[s2-GigabitEthernet0/0/2]p t a v a
[s2-GigabitEthernet0/0/3]p t a v a
[s2-port-group-1]q
[s2]int v 10
[s2-Vlanif10]ip ad
[s2-Vlanif10]ip address 192.168.10.1 24
[s2-Vlanif10]q
[s2]int v 20
[s2-Vlanif20]ip a
[s2-Vlanif20]ip address 192.168.20.2 24
[s2-Vlanif20]int v 30
[s2-Vlanif30]ip ad
[s2-Vlanif30]ip address 192.168.30.2 24
[s2-Vlanif30]int v 40
[s2-Vlanif40]ip
[s2-Vlanif40]ip a
[s2-Vlanif40]ip address 192.168.40.2 24
[s2-Vlanif40]q
[s2]ping 192.168.30.1
PING 192.168.30.1: 56 data bytes, press CTRL_C to break
Reply from 192.168.30.1: bytes=56 Sequence=1 ttl=255 time=60 ms
Reply from 192.168.30.1: bytes=56 Sequence=2 ttl=255 time=70 ms
Reply from 192.168.30.1: bytes=56 Sequence=3 ttl=255 time=60 ms
Reply from 192.168.30.1: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.30.1: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 192.168.30.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/48/70 ms
[s2]int v 10
[s2-Vlanif10]vrrp v
[s2-Vlanif10]vrrp vrid 10
^
Error:Incomplete command found at '^' position.
[s2-Vlanif10]vrrp v
[s2-Vlanif10]vrrp vrid 10 v
[s2-Vlanif10]vrrp vrid 10 virtual-ip192.168.10.254
^
Error: Unrecognized command found at '^' position.
[s2-Vlanif10]q
[s2]int v 10
[s2-Vlanif10]vrrp vrid 10 v
[s2-Vlanif10]vrrp vrid 10 virtual-ip 192.168.10.254
[s2-Vlanif10]int v 20
[s2-Vlanif20]vrrp vrid 20 vir
[s2-Vlanif20]vrrp vrid 20 virtual-ip 192.168.20.254
[s2-Vlanif20]int 30
^
Error: Unrecognized command found at '^' position.
[s2-Vlanif20]int v 30
[s2-Vlanif30]vrrp v
[s2-Vlanif30]vrrp vrid 30 vir
[s2-Vlanif30]vrrp vrid 30 virtual-ip 192.168.30.254
[s2-Vlanif30]int v 40
[s2-Vlanif40]vrrp vird 40
^
Error: Unrecognized command found at '^' position.
[s2-Vlanif40]vrrp vird 40 vir
[s2-Vlanif40]vrrp vird 40 vir
[s2-Vlanif40]vrrp vird 40 virtual-ip 192.168.40.254
^
Error: Unrecognized command found at '^' position.
[s2-Vlanif40]vrrp vrid 40 vi
[s2-Vlanif40]vrrp vrid 40 virtual-ip 192.168.40.254
[s2-Vlanif40]int v 30
[s2-Vlanif30]vrrp vrid 30 vi
[s2-Vlanif30]vrrp vrid 30 virtual-ip 192.168.30.254
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy s3
[s3]vlan b
[s3]vlan batch 10 20 30 40 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[s3]int g0/0/2
[s3-GigabitEthernet0/0/2]p l a
[s3-GigabitEthernet0/0/2]p d v 10
^
Error:Ambiguous command found at '^' position.
[s3-GigabitEthernet0/0/2]
[s3-GigabitEthernet0/0/2]port l
[s3-GigabitEthernet0/0/2]q
[s3]port-g
[s3]port-group g
[s3]int g 0/0/2
[s3-GigabitEthernet0/0/2]p l a
[s3-GigabitEthernet0/0/2]p d v 10
[s3-GigabitEthernet0/0/2]dis th
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 10
#
return
[s3-GigabitEthernet0/0/2]int g 0/0/3
[s3-GigabitEthernet0/0/3]p l a
[s3-GigabitEthernet0/0/3]p d v 20
[s3-GigabitEthernet0/0/3]dis th
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 20
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy s4
[s4]vlan b
[s4]vlan batch 10 20 30 40 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[s4]int g0/0/2
[s4-GigabitEthernet0/0/2]p l a
[s4-GigabitEthernet0/0/2]p d v 10
[s4-GigabitEthernet0/0/2]int g0/0/3
[s4-GigabitEthernet0/0/3]p l a
[s4-GigabitEthernet0/0/3]p d v 20
[s4-GigabitEthernet0/0/3]dis th
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 20
#
return
[s4-GigabitEthernet0/0/3]int g0/0/2
[s4-GigabitEthernet0/0/2]p l a
[s4-GigabitEthernet0/0/2]p d v 10
[s4-GigabitEthernet0/0/2]dis th
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 10
<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy s5
[s5]vlan b
[s5]vlan batch 10 20 30 40 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[s5]
User interface con0 is available
Please Press ENTER.
<s5>sy
<s5>system-view
Enter system view, return user view with Ctrl+Z.
[s5]int g0/0/2
[s5-GigabitEthernet0/0/2]p l a
[s5-GigabitEthernet0/0/2]p d v
Jun 27 2023 20:02:19-08:00 s5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.30
[s5-GigabitEthernet0/0/2]
<s5>u t m
Info: Current terminal monitor is off.
<s5>sy
<s5>system-view
Enter system view, return user view with Ctrl+Z.
[s5]int g 0/0/2
[s5-GigabitEthernet0/0/2]p l a
[s5-GigabitEthernet0/0/2]p d v 30
[s5-GigabitEthernet0/0/2]dis th
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 30
#
return
[s5-GigabitEthernet0/0/2]int g 0/0/3
[s5-GigabitEthernet0/0/3]p l a
[s5-GigabitEthernet0/0/3]p d v 40
[s5-GigabitEthernet0/0/3]dis th
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 40
Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy s6
[s6]vlan b
[s6]vlan batch 10 20 30 40 100
Info: This operation may take a few seconds. Please wait for a moment...done.
[s6]
User interface con0 is available
Please Press ENTER.
<s6>u t m
Info: Current terminal monitor is off.
<s6>sy
<s6>system-view
Enter system view, return user view with Ctrl+Z.
[s6]int g 0/0/2
[s6-GigabitEthernet0/0/2]p l a
[s6-GigabitEthernet0/0/2]p d v 30
[s6-GigabitEthernet0/0/2]dis th
#
interface GigabitEthernet0/0/2
port link-type access
port default vlan 30
#
return
[s6-GigabitEthernet0/0/2]int g 0/0/3
[s6-GigabitEthernet0/0/3]p l a
[s6-GigabitEthernet0/0/3]p d v 40
[s6-GigabitEthernet0/0/3]dis th
#
interface GigabitEthernet0/0/3
port link-type access
port default vlan 40