一、oled7脚+esp32+micropython_esp32连接7脚

最新推荐文章于 2024-05-17 00:00:08 发布

2401_83641634

最新推荐文章于 2024-05-17 00:00:08 发布

阅读量850

点赞数 17

分类专栏：程序员文章标签：嵌入式

本文链接：https://blog.csdn.net/2401_83641634/article/details/137418160

版权

该博客介绍了如何使用micropython ESP32通过SPI接口连接7脚OLED显示屏。示例代码展示了不同SPI配置，包括速度限制（SPI 1不超过10MHz，SPI 2不超过80MHz）以及简易模式的设置，以实现显示文本的功能。

摘要由CSDN通过智能技术生成

def contrast(self, contrast):
    self.write_cmd(SET_CONTRAST)
    self.write_cmd(contrast)

def invert(self, invert):
    self.write_cmd(SET_NORM_INV | (invert & 1))

def show(self):
    x0 = 0
    x1 = self.width - 1
    if self.width == 64:
        # displays with width of 64 pixels are shifted by 32
        x0 += 32
        x1 += 32
    self.write_cmd(SET_COL_ADDR)
    self.write_cmd(x0)
    self.write_cmd(x1)
    self.write_cmd(SET_PAGE_ADDR)
    self.write_cmd(0)
    self.write_cmd(self.pages - 1)
    self.write_framebuf()

def fill(self, col):
    self.framebuf.fill(col)

def pixel(self, x, y, col):
    self.framebuf.pixel(x, y, col)

def scroll(self, dx, dy):
    self.framebuf.scroll(dx, dy)

def text(self, string, x, y, col=1):
    self.framebuf.text(string, x, y, col)

class SSD1306_I2C(SSD1306):
def __init__(self, width, height, i2c, addr=0x3c, external_vcc=False):
self.i2c = i2c
self.addr = addr
self.temp = bytearray(2)
# Add an extra byte to the data buffer to hold an I2C data/command byte
# to use hardware-compatible I2C transactions. A memoryview of the
# buffer is used to mask this byte from the framebuffer operations
# (without a major memory hit as memoryview doesn’t copy to a separate
# buffer).
self.buffer = bytearray(((height // 8) * width) + 1)
self.buffer[0] = 0x40 # Set first byte of data buffer to Co=0, D/C=1
self.framebuf = framebuf.FrameBuffer1(memoryview(self.buffer)[1:], width, height)
super().init(width, height,