先自我介绍一下，小编浙江大学毕业，去过华为、字节跳动等大厂，目前阿里P7
深知大多数程序员，想要提升技能，往往是自己摸索成长，但自己不成体系的自学效果低效又漫长，而且极易碰到天花板技术停滞不前！
因此收集整理了一份《2024年最新软件测试全套学习资料》，初衷也很简单，就是希望能够帮助到想自学提升又不知道该从何学起的朋友。
既有适合小白学习的零基础资料，也有适合3年以上经验的小伙伴深入学习提升的进阶课程，涵盖了95%以上软件测试知识点，真正体系化！
由于文件比较多，这里只是将部分目录截图出来，全套包含大厂面经、学习笔记、源码讲义、实战项目、大纲路线、讲解视频，并且后续会持续更新
如果你需要这些资料，可以添加V获取：vip1024b （备注软件测试）
正文
Degraded : 0
检测是否有坏盘
MegaCli -AdpAllInfo -aALL -NoLog | grep “Failed Disks”
Failed Disks : 0
命令使用：
#/opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -Lall -aALL 查raid级别
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aALL 查raid卡信息
#/opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL 查看硬盘信息
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -aAll 查看电池信息
#/opt/MegaRAID/MegaCli/MegaCli64 -FwTermLog -Dsply -aALL 查看raid卡日志
#/opt/MegaRAID/MegaCli/MegaCli64 -adpCount 【显示适配器个数】
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpGetTime –aALL 【显示适配器时间】
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aAll 【显示所有适配器信息】
#/opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -LALL -aAll 【显示所有逻辑磁盘组信息】
#/opt/MegaRAID/MegaCli/MegaCli64 -PDList -aAll 【显示所有的物理信息】
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL |grep ‘Charger Status’ 【查看充电状态】
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL 【显示BBU状态信息】
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuCapacityInfo -aALL 【显示BBU容量信息】
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuDesignInfo -aALL 【显示BBU设计参数】
#/opt/MegaRAID/MegaCli/MegaCli64 -AdpBbuCmd -GetBbuProperties -aALL 【显示当前BBU属性】
#/opt/MegaRAID/MegaCli/MegaCli64 -cfgdsply -aALL 【显示Raid卡型号，Raid设置，Disk相关信息】
磁带状态的变化，从拔盘，到插盘的过程中。
Device |Normal|Damage|Rebuild|Normal
Virtual Drive |Optimal|Degraded|Degraded|Optimal
Physical Drive |Online|Failed –> Unconfigured|Rebuild|Online
查看磁盘缓存策略
#/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -L0 -a0
or
#/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -L1 -a0
or
#/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -LALL -a0
ro
#/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -Cache -LALL -aALL
ro
#/opt/MegaRAID/MegaCli/MegaCli64 -LDGetProp -DskCache -LALL -aALL
设置磁盘缓存策略
缓存策略解释：
WT (Write through
WB (Write back)
NORA (No read ahead)
RA (Read ahead)
ADRA (Adaptive read ahead)
Cached
Direct
例子：
#/opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp WT|WB|NORA|RA|ADRA -L0 -a0
or
#/opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp -Cached|-Direct -L0 -a0
or
enable / disable disk cache
创建RAID阵列
#/opt/MegaRAID/MegaCli/MegaCli64 -LDSetProp -EnDskCache|-DisDskCache -L0 -a0
6.创建一个 raid5 阵列，由物理盘 2,3,4 构成，该阵列的热备盘是物理盘 5
#/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd -r5 [1:2,1:3,1:4] WB Direct -Hsp[1:5] -a0
7.创建阵列，不指定热备
#/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd -r5 [1:2,1:3,1:4] WB Direct -a0
8.删除阵列
#/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdDel -L1 -a0
9.在线添加磁盘
#/opt/MegaRAID/MegaCli/MegaCli64 -LDRecon -Start -r5 -Add -PhysDrv[1:4] -L1 -a0
10.阵列创建完后，会有一个初始化同步块的过程，可以看看其进度。
#/opt/MegaRAID/MegaCli/MegaCli64 -LDInit -ShowProg -LALL -aALL
或者以动态可视化文字界面显示
#/opt/MegaRAID/MegaCli/MegaCli64 -LDInit -ProgDsply -LALL -aALL
11.查看阵列后台初始化进度
#/opt/MegaRAID/MegaCli/MegaCli64 -LDBI -ShowProg -LALL -aALL
或者以动态可视化文字界面显示
#/opt/MegaRAID/MegaCli/MegaCli64 -LDBI -ProgDsply -LALL -aALL
12.指定第 5 块盘作为全局热备
#/opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set [-EnclAffinity] [-nonRevertible] -PhysDrv[1:5] -a0
13.指定为某个阵列的专用热备
#/opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set [-Dedicated [-Array1]] [-EnclAffinity] [-nonRevertible] -PhysDrv[1:5] -a0
14.删除全局热备
#/opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Rmv -PhysDrv[1:5] -a0
15.将某块物理盘下线/上线
#/opt/MegaRAID/MegaCli/MegaCli64 -PDOffline -PhysDrv [1:4] -a0
#/opt/MegaRAID/MegaCli/MegaCli64 -PDOnline -PhysDrv [1:4] -a0
16.查看物理磁盘重建进度
#/opt/MegaRAID/MegaCli/MegaCli64 -PDRbld -ShowProg -PhysDrv [1:5] -a0
或者以动态可视化文字界面显示
#/opt/MegaRAID/MegaCli/MegaCli64 -PDRbld -ProgDsply -PhysDrv [1:5] -a0
磁带状态的变化，从拔盘，到插盘的过程中：
Device |Normal|Damage|Rebuild|Normal
Virtual Drive |Optimal|Degraded|Degraded|Optimal
Physical Drive |Online|Failed –> Unconfigured|Rebuild|Online
1、查看所有物理磁盘信息
MegaCli -PDList -aALL
Adapter #0
Enclosure Number: 1
Slot Number: 5
Device Id: 5
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
Raw Size: 140014MB [0x11177328 Sectors]
Non Coerced Size: 139502MB [0x11077328 Sectors]
Coerced Size: 139392MB [0x11040000 Sectors]
Firmware state: Hotspare
SAS Address(0): 0x5000c50008e5cca9
SAS Address(1): 0x0
Inquiry Data: SEAGATE ST3146855SS S5273LN4Y1X0
2、查看磁盘缓存策略
MegaCli -LDGetProp -Cache -L0 -a0
Adapter 0-VD 0: Cache Policy:WriteBack, ReadAheadNone, Direct
or
MegaCli -LDGetProp -Cache -L1 -a0
Adapter 0-VD 1: Cache Policy:WriteBack, ReadAheadNone, Direct
or
MegaCli -LDGetProp -Cache -LALL -a0
Adapter 0-VD 0: Cache Policy:WriteBack, ReadAheadNone, Direct
Adapter 0-VD 1: Cache Policy:WriteBack, ReadAheadNone, Direct
or
MegaCli -LDGetProp -Cache -LALL -aALL
Adapter 0-VD 0: Cache Policy:WriteBack, ReadAheadNone, Direct
Adapter 0-VD 1: Cache Policy:WriteBack, ReadAheadNone, Direct
or
MegaCli -LDGetProp -DskCache -LALL -aALL
Adapter 0-VD 0: Disk Write Cache : Disk’s Default
Adapter 0-VD 1: Disk Write Cache : Disk’s Default
3、设置磁盘缓存策略
缓存策略解释：
WT (Write through
WB (Write back)
NORA (No read ahead)
RA (Read ahead)
ADRA (Adaptive read ahead)
Cached
Direct
例子：
MegaCli -LDSetProp WT|WB|NORA|RA|ADRA -L0 -a0
or
MegaCli -LDSetProp -Cached|-Direct -L0 -a0
or
enable / disable disk cache
MegaCli -LDSetProp -EnDskCache|-DisDskCache -L0 -a0
4、创建/删除 阵列
4.1 创建一个 raid5 阵列，由物理盘 2,3,4 构成，该阵列的热备盘是物理盘 5
MegaCli -CfgLdAdd -r5 [1:2,1:3,1:4] WB Direct -Hsp[1:5] -a0
4.2 创建阵列，不指定热备
MegaCli -CfgLdAdd -r5 [1:2,1:3,1:4] WB Direct -a0
4.3 删除阵列
MegaCli -CfgLdDel -L1 -a0
4.4 在线添加磁盘
MegaCli -LDRecon -Start -r5 -Add -PhysDrv[1:4] -L1 -a0
意思是，重建逻辑磁盘组1，raid级别是5，添加物理磁盘号：1:4。重建完后，新添加的物理磁盘会自动处于重建(同步)状态，这个 时候 fdisk -l是看不到阵列的空间变大的，只有在系统重启后才能看见。
5、查看阵列初始化信息
5.1 阵列创建完后，会有一个初始化同步块的过程，可以看看其进度。
MegaCli -LDInit -ShowProg -LALL -aALL
或者以动态可视化文字界面显示
MegaCli -LDInit -ProgDsply -LALL -aALL
5.2 查看阵列后台初始化进度
MegaCli -LDBI -ShowProg -LALL -aALL
或者以动态可视化文字界面显示
MegaCli -LDBI -ProgDsply -LALL -aALL
6、创建全局热备
指定第 5 块盘作为全局热备
MegaCli -PDHSP -Set [-EnclAffinity] [-nonRevertible] -PhysDrv[1:5] -a0
也可以指定为某个阵列的专用热备
MegaCli -PDHSP -Set [-Dedicated [-Array1]] [-EnclAffinity] [-nonRevertible] -PhysDrv[1:5] -a0
7、删除全局热备
MegaCli -PDHSP -Rmv -PhysDrv[1:5] -a0
8、将某块物理盘下线/上线
MegaCli -PDOffline -PhysDrv [1:4] -a0
MegaCli -PDOnline -PhysDrv [1:4] -a0
9、查看物理磁盘重建进度
MegaCli -PDRbld -ShowProg -PhysDrv [1:5] -a0
查看raid 电池状态
查看当前raid缓存状态，raid缓存状态设置为wb的话要注意电池放电事宜，设置电池放电模式为自动学习模式
/opt/MegaRAID/MegaCli/MegaCli64 -ldgetprop -dskcache -lall -aall
raid 电池设置相关
查看电池状态信息(Display BBU Status Information)
MegaCli -AdpBbuCmd -GetBbuStatus -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuStatus -aALL
查看电池容量（Display BBU Capacity Information）
MegaCli -AdpBbuCmd -GetBbuCapacityInfo -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuCapacityInfo –aALL
查看电池设计参数(Display BBU Design Parameters)
MegaCli -AdpBbuCmd -GetBbuDesignInfo -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuDesignInfo –aALL
查看电池属性（Display Current BBU Properties）
MegaCli -AdpBbuCmd -GetBbuProperties -aN|-a0,1,2|-aALL
MegaCli -AdpBbuCmd -GetBbuProperties –aALL
设置电池为学习模式为循环模式（Start BBU Learning Cycle）
Description Starts the learning cycle on the BBU.
No parameter is needed for this option.
MegaCli -AdpBbuCmd -BbuLearn -aN|-a0,1,2|-aALL
设置磁盘的缓存模式和访问方式 （Change Virtual Disk Cache and Access Parameters）
Description Allows you to change the following virtual disk parameters:
-WT (Write through), WB (Write back): Selects write policy.
-NORA (No read ahead), RA (Read ahead), ADRA (Adaptive read ahead): Selects read policy.
-Cached, -Direct: Selects cache policy.
-RW, -RO, Blocked: Selects access policy.
-EnDskCache: Enables disk cache.
-DisDskCache: Disables disk cache.
MegaCli -LDSetProp { WT | WB|NORA |RA | ADRA|-Cached|Direct} |
{-RW|RO|Blocked} |
{-Name[string]} |
{-EnDskCache|DisDskCache} –Lx |
-L0,1,2|-Lall -aN|-a0,1,2|-aALL
MegaCli -LDSetProp WT -L0 -a0
显示磁盘缓存和访问方式（Display Virtual Disk Cache and Access Parameters）
MegaCli -LDGetProp -Cache | -Access | -Name | -DskCache -Lx|-L0,1,2|
-Lall -aN|-a0,1,2|-aALL
Displays the cache and access policies of the virtual disk(s):
-WT (Write through), WB (Write back): Selects write policy.
-NORA (No read ahead), RA (Read ahead), ADRA (Adaptive read ahead): Selects read policy.
-Cache, -Cached, Direct: Displays cache policy.
-Access, -RW, -RO, Blocked: Displays access policy.
-DskCache: Displays physical disk cache policy.
Megaraid 必知必会 使用LSI的megaraid可以对raid进行有效监控。别的厂商比如HP,IBM也有自己的raid API
MegaCli -ldinfo -lall -aall
查询raid级别，磁盘数量，容量，条带大小。
MegaCli -cfgdsply -aALL |grep Policy
查询控制器cache策略
MegaCli -LDSetProp WB -L0 -a0
设置write back功能
MegaCli -LDSetProp CachedBadBBU -L0 -a0
设置即使电池坏了还是保持WB功能
MegaCli -AdpBbuCmd -BbuLearn a0
手动充电
MegaCli -FwTermLog -Dsply -aALL
查询日志
显示适配器个数： MegaCli -adpCount
显示所有适配器信息： MegaCli -AdpAllInfo -aAll
Critical Disks : 0
Failed Disks : 0
显示所有逻辑磁盘组信息： MegaCli -LDInfo -LALL -aAll
显示所有的物理信息： MegaCli -PDList -aAll
Media Error Count: 0
Other Error Count: 0
查看充电状态： MegaCli -AdpBbuCmd -GetBbuStatus -aALL
Learn Cycle Requested : No
Fully Charged : Yes
显示BBU(后备电池)状态信息： MegaCli -AdpBbuCmd -GetBbuStatus -aALL
显示BBU容量信息： MegaCli -AdpBbuCmd -GetBbuCapacityInfo -aALL
显示BBU设计参数： MegaCli -AdpBbuCmd -GetBbuDesignInfo -aALL
显示当前BBU属性： MegaCli -AdpBbuCmd -GetBbuProperties -aALL
显示Raid卡型号，Raid设置，Disk相关信息： MegaCli -cfgdsply -aALL
查看Cache 策略设置： MegaCli -cfgdsply -aALL |grep -i Policy
Current Cache Policy: WriteBack, ReadAheadNone, Direct, Write Cache OK if Bad BBU
查看充电进度百分比： MegaCli -AdpBbuCmd -GetBbuStatus -aALL
各种设备和磁盘的不同状态：
Device |Normal|Damage|Rebuild|Normal
Virtual Drive |Optimal|Degraded|Degraded|Optimal
Physical Drive |Online|Failed –> Unconfigured|Rebuild|Online
通过脚本检测RAID 磁盘状态
Linux下脚本
#!/bin/bash
#check raid disk status
MEGACLI="/opt/MegaRAID/MegaCli/MegaCli64 "
$MEGACLI -pdlist -aALL | grep “Firmware state” | awk -F : ‘{print $2}’ | awk -F , ‘{print $1}’ >/tmp/fireware.log
$MEGACLI -pdlist -aALL | grep -E “Media Error|Other Error” | awk -F : ‘{print $2}’ >/tmp/disk.log
for i in cat < /tmp/disk.log
do
if [ $i -ne 0 ]
then
curl “http://xxxxxxB&state=ALARM&description=raid_disk_error”
fi
done
for i in cat < /tmp/fireware.log
do
if [ $i != Online ]
then
curl “http://xxxxxxstate=ALARM&description=raid_disk_offline”
fi
done
CentOS安装megacli
yum install megacli -y
查看Raid卡信息
megacli -LDInfo -Lall -aALL
查看硬盘信息：
megacli -PDList -aALL
查看Raid卡信息
[root@ robin]# megacli -LDInfo -Lall -aALL
OSSpecificInitialize: Failed to load libsysfs.so.2.0.2 Please ensure that libsfs is present in the system.
The dependent library libsysfs.so.2.0.1 not available. Please contact LSI for distribution of the package
Adapter 0 – Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 930.5 GB
Mirror Data : 930.5 GB
State : Optimal <<<< 这是正常的状态。
Strip Size : 64 KB
Number Of Drives per span:2 <<<< RAID组包含2块磁盘（但实际是4块500G的SSD做Raid10）。
Span Depth : 2 <<<< 深度若是1，说明实际只是RAID 1。2表示可以是RAID 10
Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Disk’s Default
Ongoing Progresses:
Background Initialization: Completed 41%, Taken 190 min.
Encryption Type : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: None
Can spin up in 1 minute: No
LD has drives that support T10 power conditions: No
LD’s IO profile supports MAX power savings with cached writes: No
Bad Blocks Exist: No
Is VD Cached: No
查看硬盘信息：
[root@localhost ~]# megacli -PDList -aALL
###有如下样式的几段，说明实际有几块硬盘（下面是一块500G的SSD的信息）
Enclosure Device ID: 32
Slot Number: 3
Drive’s postion: DiskGroup: 0, Span: 1, Arm: 1
Enclosure position: 0
Device Id: 3
WWN: 50025388A0061518
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 465.761 GB [0x3a386030 Sectors]
Non Coerced Size: 465.261 GB [0x3a286030 Sectors]
Coerced Size: 465.25 GB [0x3a280000 Sectors]
Firmware state: Online, Spun Up
Device Firmware Level: BB0Q
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x4433221107000000
Connected Port Number: 3(path0)
Inquiry Data: S1DHNSADA04008B Samsung SSD 840 EVO 500GB EXT0BB0Q
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Solid State Device
Drive: Not Certified
Drive Temperature :32C (89.60 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Drive’s write cache : Disabled
Drive’s NCQ setting : Disabled
Port-0 :
Port status: Active
Port’s Linkspeed: 6.0Gb/s
Drive has flagged a S.M.A.R.T alert : No
备注：
RAID型号对应表信息如下：
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0" #代表Raid 1
RAID Level : Primary-0, Secondary-0, RAID Level Qualifier-0" #代表Raid 0
RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3" #代表Raid 5
RAID Level : Primary-1, Secondary-3, RAID Level Qualifier-0" #代表Raid10
命令行模式举例如下:
lsiutil –p1 –a 21,1,0,0,0 和上边菜单操作一样，只不过不用手动去选择菜单项了
lsiutil -p 1 -i –s 显示端口1的设置和连接的设备
lsiutil –s 显示所有端口上连接的设备
lsiutil -p 2 -l 1 强制HBA卡端口2连接速度为1Gb
案例 ：
1、MegaCli操作1—创建与删除raid0
服务器DELL R710加硬盘，准备在线做raid。
用MegaCli做阵列，最重要是就是这三个系数：
Adapter #0
Enclosure Device ID: 32
Slot Number: 0
分别代表了 -PhysDrv[E0:S0,E1:S1,…] -aN #物理磁盘的 enclosure号:slot号 -a是阵列卡号
这些参数可以通过下面的命令得到。
查看阵列卡信息
lspci -v
/opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aALL
查看所有物理硬盘状态
/opt/MegaRAID/MegaCli/MegaCli64 -PDList -a0
/opt/MegaRAID/MegaCli/MegaCli64 help |grep -i pdinfo
MegaCli -pdInfo -PhysDrv[E0:S0,E1:S1,…] -aN|-a0,1,2|-aALL
MegaCli -LdPdInfo -aN|-a0,1,2|-aALL
查看逻辑盘详细信息
/opt/MegaRAID/MegaCli/MegaCli64 -LdPdInfo -aALL
查看单个盘的详细信息
/opt/MegaRAID/MegaCli/MegaCli64 -pdInfo -PhysDrv[32:3] -aALL
Adapter 0: Device at Enclosure - 32, Slot - 3 is not found.
像我新增加的硬盘就是 [32:2]
这里我的硬盘被标记为“Foreign”外来配置，要清除一下，不然会报下面这个错误：
The specified physical disk does not have the appropriate attributes to complete
the requested command.
Exit Code: 0x26
扫描外来配置的个数：
/opt/MegaRAID/MegaCli/MegaCli64 -cfgforeign -scan -a0
There are 1 foreign configuration(s) on controller 0.
Exit Code: 0x00
清除外来配置：
/opt/MegaRAID/MegaCli/MegaCli64 -cfgforeign -clear -a0
Foreign configuration 0 is cleared on controller 0.
Exit Code: 0x00
再次扫描外来配置的个数：
/opt/MegaRAID/MegaCli/MegaCli64 -cfgforeign -scan -a0
There is no foreign configuration on controller 0.
Exit Code: 0x00
创建Raid0
/opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd -r0[32:2] WB Direct -a0
Adapter 0: Created VD 2
Adapter 0: Configured the Adapter!!
Exit Code: 0x00
删除阵列：
/opt/MegaRAID/MegaCli/MegaCli6 -cfgclr -a0 清除所有的raid组的配置
/opt/MegaRAID/MegaCli/MegaCli6 -cfglddel -L0 -a0 删除指定的raid组(Target Id: 0)的raid组，可以通过上面的“查看逻辑盘详细信息”得到。
查看硬盘的重建情况：
/opt/MegaRAID/MegaCli/MegaCli64 -PDRbld -ProgDsply -PhysDrv [12:7] -aALL
Device(Encl-12 Slot-7) is not in rebuild process
2、MegaCli使用方法
查看磁盘使用情况
[root@ ~]# MegaCli -PDList -Aall
Enclosure Device ID: 32
Slot Number: 0
Enclosure position: 0
Device Id: 0
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 931.512 GB [0x74706db0 Sectors]
Non Coerced Size: 931.012 GB [0x74606db0 Sectors]
Coerced Size: 931.0 GB [0x74600000 Sectors]
Firmware state: Online, Spun Up 在线
Enclosure Device ID: 32
Slot Number: 1
Enclosure position: 0
Device Id: 1
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 931.512 GB [0x74706db0 Sectors]
Non Coerced Size: 931.012 GB [0x74606db0 Sectors]
Coerced Size: 931.0 GB [0x74600000 Sectors]
Firmware state: Online, Spun Up
SAS Address(0): 0x5000c500586e6559
Enclosure Device ID: 32
Slot Number: 2
Enclosure position: 0
Device Id: 2
Sequence Number: 3
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Firmware state: Unconfigured(good), Spun Up 安装了磁盘，但是没有使用
Enclosure Device ID: 32
Slot Number: 3
Enclosure position: 0
Device Id: 3
Sequence Number: 3
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 1.819 TB [0xe8e088b0 Sectors]
Non Coerced Size: 1.818 TB [0xe8d088b0 Sectors]
Coerced Size: 1.818 TB [0xe8d00000 Sectors]
Firmware state: Unconfigured(good), Spun Up 安装了磁盘，但是没有使用
2块2T磁盘使用MegaCli做raid0
[root@ZAMPDMP-08 ~]# MegaCli -CfgLdAdd -r0 [32:2,32:3] WB Direct -a0
Adapter 0: Created VD 1
Adapter 0: Configured the Adapter!!
Exit Code: 0x00
单块4T磁盘做raid0
对7号槽的单块4T硬盘做raid0
MegaCli -CfgLdAdd -r0 [32:6] WB Direct -a0
单块盘要么调整raid 为jbod模式
要么就做成raid0 才能作为单块盘使用
无实际意义
只是raid卡的限制
查看raid
[root@ZAMPDMP-08 ~]# MegaCli -LdPdInfo -aALL Adapter #0
Number of Virtual Disks: 2
Virtual Drive: 0 (Target Id: 0) 第一个raid，包括slot 0,1，对应插槽0和1，级别raid0
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 931.0 GB
State : Optimal
Strip Size : 64 KB
Number Of Drives : 2
Span Depth : 1
Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Access Policy : Read/Write
Disk Cache Policy : Disk’s Default
网上学习资料一大堆，但如果学到的知识不成体系，遇到问题时只是浅尝辄止，不再深入研究，那么很难做到真正的技术提升。
需要这份系统化的资料的朋友，可以添加V获取：vip1024b （备注软件测试）
一个人可以走的很快，但一群人才能走的更远！不论你是正从事IT行业的老鸟或是对IT行业感兴趣的新人，都欢迎加入我们的的圈子（技术交流、学习资源、职场吐槽、大厂内推、面试辅导），让我们一起学习成长！
只是raid卡的限制
查看raid
[root@ZAMPDMP-08 ~]# MegaCli -LdPdInfo -aALL Adapter #0
Number of Virtual Disks: 2
Virtual Drive: 0 (Target Id: 0) 第一个raid，包括slot 0,1，对应插槽0和1，级别raid0
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 931.0 GB
State : Optimal
Strip Size : 64 KB
Number Of Drives : 2
Span Depth : 1
Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Access Policy : Read/Write
Disk Cache Policy : Disk’s Default
网上学习资料一大堆，但如果学到的知识不成体系，遇到问题时只是浅尝辄止，不再深入研究，那么很难做到真正的技术提升。
需要这份系统化的资料的朋友，可以添加V获取：vip1024b （备注软件测试）
[外链图片转存中…(img-kTMxqlsp-1713296580911)]
一个人可以走的很快，但一群人才能走的更远！不论你是正从事IT行业的老鸟或是对IT行业感兴趣的新人，都欢迎加入我们的的圈子（技术交流、学习资源、职场吐槽、大厂内推、面试辅导），让我们一起学习成长！
600
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
