VIM配置和使用

1、使用.vimrc 

参考最后的代码。

2、安装 cscope  https://sourceforge.net/projects/cscope/

    cscope-indexer 在cscope-15.9/contrib/xcscope 目录，注意cscope-indexer依赖 cscope

3、使用  cscope-indexer  创建索引

    $ cscope-indexer -r
    之后会生成两个索引文件
    cscope.files  cscope.out
    
    如果还没打开代码文件
        $ vim 
        :cs f g start_kernel  查找定义 go
        
        :cs f c start_kernel  查找调用 call
    
    如果已经打开了代码文件
            光标停留在start_kernel
        ctrl \ , 抬起来后g    --> 跳转到定义
        ctrl \ , 抬起来后c    --> 跳转到call
        
    gg 跳转到第一行
    G  跳转到最后一行
    
4、字符串替换

    ctrl \ , 抬起来后r  ，命令行会自动补出替换的格式 :%s/ostr/nstr/g     ostr旧字符串  nstr 新字符串  ，替换后回车即可。

.vimrc 如下

set wildmenu
set number
set nocompatible
set autoindent
set history=50
set ruler
set showcmd
set incsearch
set ai
set showmatch
set showmode
set hlsearch

set t_Co=8
set cino=:0
set cindent

colo ron
syntax on

""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" CSCOPE settings for vim           
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"
" This file contains some boilerplate settings for vim's cscope interface,
" plus some keyboard mappings that I've found useful.
"
" USAGE: 
" -- vim 6:     Stick this file in your ~/.vim/plugin directory (or in a
"               'plugin' directory in some other directory that is in your
"               'runtimepath'.
"
" -- vim 5:     Stick this file somewhere and 'source cscope.vim' it from
"               your ~/.vimrc file (or cut and paste it into your .vimrc).
"
" NOTE: 
" These key maps use multiple keystrokes (2 or 3 keys).  If you find that vim
" keeps timing you out before you can complete them, try changing your timeout
" settings, as explained below.
"
" Happy cscoping,
"
" Jason Duell       jduell@alumni.princeton.edu     2002/3/7
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""


" This tests to see if vim was configured with the '--enable-cscope' option
" when it was compiled.  If it wasn't, time to recompile vim... 

    """"""""""""" Standard cscope/vim boilerplate

    " use both cscope and ctag for 'ctrl-]', ':ta', and 'vim -t'
    " set cscopetag

    " check cscope for definition of a symbol before checking ctags: set to 1
    " if you want the reverse search order.
    set csto=0

    " add any cscope database in current directory
    if filereadable("cscope.out")
    	cs add cscope.out  
    "else add the database pointed to by environment variable 
    elseif $CSCOPE_DB != ""
       cs add $CSCOPE_DB
    endif

    " show msg when any other cscope db added
    set cscopeverbose  


    """"""""""""" My cscope/vim key mappings
    "
    " The following maps all invoke one of the following cscope search types:
    "
    "   's'   symbol: find all references to the token under cursor
    "   'g'   global: find global definition(s) of the token under cursor
    "   'c'   calls:  find all calls to the function name under cursor
    "   't'   text:   find all instances of the text under cursor
    "   'e'   egrep:  egrep search for the word under cursor
    "   'f'   file:   open the filename under cursor
    "   'i'   includes: find files that include the filename under cursor
    "   'd'   called: find functions that function under cursor calls
    "
    " Below are three sets of the maps: one set that just jumps to your
    " search result, one that splits the existing vim window horizontally and
    " diplays your search result in the new window, and one that does the same
    " thing, but does a vertical split instead (vim 6 only).
    "
    " I've used CTRL-\ and CTRL-@ as the starting keys for these maps, as it's
    " unlikely that you need their default mappings (CTRL-\'s default use is
    " as part of CTRL-\ CTRL-N typemap, which basically just does the same
    " thing as hitting 'escape': CTRL-@ doesn't seem to have any default use).
    " If you don't like using 'CTRL-@' or CTRL-\, , you can change some or all
    " of these maps to use other keys.  One likely candidate is 'CTRL-_'
    " (which also maps to CTRL-/, which is easier to type).  By default it is
    " used to switch between Hebrew and English keyboard mode.
    "
    " All of the maps involving the <cfile> macro use '^<cfile>$': this is so
    " that searches over '#include <time.h>" return only references to
    " 'time.h', and not 'sys/time.h', etc. (by default cscope will return all
    " files that contain 'time.h' as part of their name).


    " To do the first type of search, hit 'CTRL-\', followed by one of the
    " cscope search types above (s,g,c,t,e,f,i,d).  The result of your cscope
    " search will be displayed in the current window.  You can use CTRL-T to
    " go back to where you were before the search.  
    "

    nmap <C-\>s :cs find s <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>g :cs find g <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>c :cs find c <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>t :cs find t <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>e :cs find e <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-\>f :cs find f <C-R>=expand("<cfile>")<CR><CR>	
    nmap <C-\>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
    nmap <C-\>d :cs find d <C-R>=expand("<cword>")<CR><CR>	


    " Using 'CTRL-spacebar' (intepreted as CTRL-@ by vim) then a search type
    " makes the vim window split horizontally, with search result displayed in
    " the new window.
    "
    " (Note: earlier versions of vim may not have the :scs command, but it
    " can be simulated roughly via:
    "    nmap <C-@>s <C-W><C-S> :cs find s <C-R>=expand("<cword>")<CR><CR>	

    nmap <C-@>s :scs find s <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>g :scs find g <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>c :scs find c <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>t :scs find t <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>e :scs find e <C-R>=expand("<cword>")<CR><CR>	
    nmap <C-@>f :scs find f <C-R>=expand("<cfile>")<CR><CR>	
    nmap <C-@>i :scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>	
    nmap <C-@>d :scs find d <C-R>=expand("<cword>")<CR><CR>	


    " Hitting CTRL-space *twice* before the search type does a vertical 
    " split instead of a horizontal one (vim 6 and up only)
    "
    " (Note: you may wish to put a 'set splitright' in your .vimrc
    " if you prefer the new window on the right instead of the left

    nmap <C-@><C-@>s :vert scs find s <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>g :vert scs find g <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>c :vert scs find c <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>t :vert scs find t <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>e :vert scs find e <C-R>=expand("<cword>")<CR><CR>
    nmap <C-@><C-@>f :vert scs find f <C-R>=expand("<cfile>")<CR><CR>	
    nmap <C-@><C-@>i :vert scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>	
    nmap <C-@><C-@>d :vert scs find d <C-R>=expand("<cword>")<CR><CR>

    " replace string
    nmap <C-\>r :%s/ostr/nstr/g

    set pastetoggle=<F10>   "key_board map--> paste