Hardware and network editor

最新推荐文章于 2024-06-27 10:37:12 发布

Airfrozen

最新推荐文章于 2024-06-27 10:37:12 发布

阅读量254

点赞数

分类专栏： S7-1500

本文链接：https://blog.csdn.net/Airfrozen/article/details/109189650

版权

硬件和网络编辑器是配置、联网和为设备及模块分配参数的集成开发环境。它包括网络视图、设备视图、拓扑视图等部分，用于设备配置、模块参数设置、网络构建和通信设置等任务。通过硬件目录将所需设备拖放到网络、设备或拓扑视图中，并在检查器窗口中更改选定对象的设置。

摘要由CSDN通过智能技术生成

The hardware and network editor opens when you double-click on the "Devices and Networks" entry in the project tree. The hardware and network editor is the integrated development environment for configuring, networking and assigning parameters to devices and modules.

① Device view, Network view, Topology view: Graphic area
② Device view, Network view, Topology view: Table area
③ Hardware catalog
④ Inspector window

Drag the devices and modules you need for your automation system from the hardware catalog to the network, device or topology view.
The inspector window contains information on the object currently marked. Here you can change the settings for the object marked.