HCIP实验

实验要求

1.R2为ISP，其上只能配置IP地址

2.R1-R2之间为HDLC封装

3.R2-R3之间为PPP封装，pap认证，R3为主认证方

4.R2-R4之间为PPP封装，chap认证，R2为主认证方

5.R1、R2、R3构建MGRE环境，仅R1IP地址固定

6.内网使用RIP获取路由，所有pc可以互相访问，并且可访问R2的环回

IP配置

[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.2 24
[R1-GigabitEthernet0/0/0]int s 4/0/0
[R1-Serial4/0/0]ip add 12.1.1.1 24
[R2]int s 4/0/0
[R2-Serial4/0/0]ip add 23.1.1.2 24
[R2-Serial4/0/0]int s 4/0/1
[R2-Serial4/0/1]ip add 34.1.1.1 24
[R2-Serial4/0/1]int s 3/0/0
[R2-Serial3/0/0]ip add 12.1.1.1 24
[R3]in s4/0/0
[R3-Serial4/0/0]ip add 23.1.1.2 24
[R3-Serial4/0/0]int g 0/0/0	
[R3-GigabitEthernet0/0/0]ip add 192.168.2.1 24
[R4]int s 4/0/0
[R4-Serial4/0/0]ip add 32.1.1.2 24
[R4-Serial4/0/0]int g 0/0/0	
[R4-GigabitEthernet0/0/0]ip add 192.168.3.1 24

配置缺省路由

[R1]ip route-static 0.0.0.0 0 12.1.1.2
[R3]ip route-static 0.0.0.0 0 23.1.1.1
[R4]ip route-static 0.0.0.0 0 34.1.1.1

配置ACL及NAT

[R1]acl 2000
[R1-acl-basic-2000]rule 1 permit source any
[R1]int s 4/0/0
[R1-Serial4/0/0]nat outbound 2000
[R3]acl 2000
[R3-acl-basic-2000]rule 1 permit source any
[R3]int s 4/0/0
[R3-Serial4/0/0]nat outbound 2000
[R4]acl 2000
[R4-acl-basic-2000]rule 1 permit source any
[R4]int s 4/0/0
[R4-Serial4/0/0]nat outbound 2000

PAP认证

[R2]aaa
[R2-aaa]local-user huawei password cipher huawei
[R2-aaa]local-user huawei service-type ppp
[R2]aa	
[R2-aaa]local-user huawei password cipher huawei
[R2-aaa]local-user huawei service-type ppp 
[R2]int s 3/0/0	
[R2-Serial3/0/0]ppp authentication-mode chap
[R3]int s 4/0/0	
[R3-Serial4/0/0]ppp pap local-user huawei password cipher huawei
[R4]int s 4/0/0
[R4-Serial4/0/0]ppp chap password cipher huawei
[R4-Serial4/0/0]ppp chap user huawei

HDLC封装

[R1-Serial4/0/0]link-protocol hdlc
[R2-Serial3/0/0]link-protocol hdlc

配置RIP

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24	
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp 	
[R1-Tunnel0/0/0]source 12.1.1.1
[R1-Tunnel0/0/0]nhrp entry multicast dynamic 	
[R1-Tunnel0/0/0]nhrp network-id 100
[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.1 24	
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp 	
[R3-Tunnel0/0/0]source 23.1.1.2
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register
[R3-Tunnel0/0/0]nhrp network-id 100
[R4]int Tunnel 0/0/0
[R4-Tunnel0/0/0]ip add 10.1.1.1 24	
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp 	
[R4-Tunnel0/0/0]source 34.1.1.1
[R4-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register	
[R4-Tunnel0/0/0]nhrp network-id 100