#include "max30102.h"
#include <Wire.h>
bool maxim_max30102_write_reg(uint8_t uch_addr, uint8_t uch_data)
/**
* \brief Write a value to a MAX30102 register
* \par Details
* This function writes a value to a MAX30102 register
*
* \param[in] uch_addr - register address
* \param[in] uch_data - register data
*
* \retval true on success
*/
{
Wire.beginTransmission(I2C_WRITE_ADDR);
Wire.write(uch_addr);
Wire.write(uch_data);
Wire.endTransmission();
return true;
}
bool maxim_max30102_read_reg(uint8_t uch_addr, uint8_t *puch_data)
/**
* \brief Read a MAX30102 register
* \par Details
* This function reads a MAX30102 register
*
* \param[in] uch_addr - register address
* \param[out] puch_data - pointer that stores the register data
*
* \retval true on success
*/
{
Wire.beginTransmission(I2C_WRITE_ADDR);
Wire.write(uch_addr);
Wire.endTransmission();
Wire.beginTransmission(I2C_READ_ADDR);
Wire.requestFrom(I2C_READ_ADDR,1);
*puch_data=Wire.read();
Wire.endTransmission();
return true;
}
bool maxim_max30102_init()
/**
* \brief Initialize the MAX30102
* \par Details
* This function initializes the MAX30102
*
* \param None
*
* \retval true on success
*/
{
Wire.begin();
if(!maxim_max30102_write_reg(REG_INTR_ENABLE_1,0xc0)) // INTR setting
return false;
if(!maxim_max30102_write_reg(REG_INTR_ENABLE_2,0x00))
return false;
if(!maxim_max30102_write_reg(REG_FIFO_WR_PTR,0x00)) //FIFO_WR_PTR[4:0]
return false;
if(!maxim_max30102_write_reg(REG_OVF_COUNTER,0x00)) //OVF_COUNTER[4:0]
return false;
if(!maxim_max30102_write_reg(REG_FIFO_RD_PTR,0x00)) //FIFO_RD_PTR[4:0]
return false;
if(!maxim_max30102_write_reg(REG_FIFO_CONFIG,0x4f)) //sample avg = 4, fifo rollover=false, fifo almost full = 17
return false;
if(!maxim_max30102_write_reg(REG_MODE_CONFIG,0x03)) //0x02 for Red only, 0x03 for SpO2 mode 0x07 multimode LED
return false;
if(!maxim_max30102_write_reg(REG_SPO2_CONFIG,0x27)) // SPO2_ADC range = 4096nA, SPO2 sample rate (100 Hz), LED pulseWidth (411uS)
return false;
if(!maxim_max30102_write_reg(REG_LED1_PA,0x24)) //Choose value for ~ 7mA for LED1
return false;
if(!maxim_max30102_write_reg(REG_LED2_PA,0x24)) // Choose value for ~ 7mA for LED2
return false;
if(!maxim_max30102_write_reg(REG_PILOT_PA,0x7f)) // Choose value for ~ 25mA for Pilot LED
return false;
return true;
}
//#if defined(ARDUINO_AVR_UNO)
//Arduino Uno doesn't have enough SRAM to store 100 samples of IR led data and red led data in 32-bit format
//To solve this problem, 16-bit MSB of the sampled data will be truncated. Samples become 16-bit data.
//bool maxim_max30102_read_fifo(uint16_t *pun_red_led, uint16_t *pun_ir_led)
//#else
bool maxim_max30102_read_fifo(uint32_t *pun_red_led, uint32_t *pun_ir_led)
//#endif
/**
* \brief Read a set of samples from the MAX30102 FIFO register
* \par Details
* This function reads a set of samples from the MAX30102 FIFO register
*
* \param[out] *pun_red_led - pointer that stores the red LED reading data
* \param[out] *pun_ir_led - pointer that stores the IR LED reading data
*
* \retval true on success
*/
{
uint32_t un_temp;
uint8_t uch_temp;
*pun_ir_led=0;
*pun_red_led=0;
maxim_max30102_read_reg(REG_INTR_STATUS_1, &uch_temp);
maxim_max30102_read_reg(REG_INTR_STATUS_2, &uch_temp);
Wire.beginTransmission(I2C_WRITE_ADDR);
Wire.write(REG_FIFO_DATA);
Wire.endTransmission();
Wire.beginTransmission(I2C_READ_ADDR);
Wire.requestFrom(I2C_READ_ADDR,6);
un_temp=Wire.read();
un_temp<<=16;
*pun_red_led+=un_temp;
un_temp=Wire.read();
un_temp<<=8;
*pun_red_led+=un_temp;
un_temp=Wire.read();
*pun_red_led+=un_temp;
un_temp=Wire.read();
un_temp<<=16;
*pun_ir_led+=un_temp;
un_temp=Wire.read();
un_temp<<=8;
*pun_ir_led+=un_temp;
un_temp=Wire.read();
*pun_ir_led+=un_temp;
Wire.endTransmission();
*pun_red_led&=0x03FFFF; //Mask MSB [23:18]
*pun_ir_led&=0x03FFFF; //Mask MSB [23:18]
return true;
}
bool maxim_max30102_reset()
/**
* \brief Reset the MAX30102
* \par Details
* This function resets the MAX30102
*
* \param None
*
* \retval true on success
*/
{
if(!maxim_max30102_write_reg(REG_MODE_CONFIG,0x40))
return false;
else
return true;
}
新时代健康管家-多功能体征监测设备
最新推荐文章于 2024-07-24 15:07:34 发布