Java反编译工具Jad的下载与使用示例

163 篇文章 4 订阅 ¥15.90 ¥99.00

场景

Java反编译工具-JD-GUI下载以及使用:

Java反编译工具-JD-GUI下载以及使用_霸道流氓气质的博客-CSDN博客

上面讲过Java反编译工具JD-GUI的使用,如果使用jad并通过命令如何实现反编译。

 

为了验证Java开发手册中为什么不推荐使用+进行字符串拼接,我们编写示例代码并编译和进行反编译

之后进行验证。

注:

博客:
霸道流氓气质的博客_CSDN博客-C#,架构之路,SpringBoot领域博主

Java反编译工具Jad的下载

java反编译工具jad 1.5.8g支持 jdk1.5,jdk1.6。说明很多记住一个万能的命令基本就够用了。jad -sjava -r -8 -o **\*.class ---------------This is README file for Jad - the fast Java Decompiler.Jad home page: http://www.kpdus.com/jad.htmlCopyright 2001 Pavel Kouznetsov (jad@kpdus.com).0. Please read the disclaimer on the Jad home page.1. Installation.Unzip jad.zip file into any appropriate directory on your hard drive.This will create two files: - an executable file named 'jad.exe' (Windows *) or 'jad' (*n*x) - this README fileNo other setup is required.2. How to use JadTo decompile a single JAVA class file 'example1.class' type the following: jad example1.classThis command creates file 'example1.jad' in the current directory.If such file already exists Jad asks whether you want to overwrite it or not.Option -o permits overwriting without a confirmation.You can omit .class extension and/or use wildcards in the names ofinput files.Option -s allows to change output file extension: jad -sjava example1.classThis command creates file 'example1.java'. Be careful when usingoptions -o and -sjava together, because Jad can accidentally overwriteyour own source files.Jad uses JAVA class name as an output file name. For example, if classfile 'example1.class' contains JAVA class 'test1' then Jad will createfile 'test1.jad' rather than 'example1.jad'. If you want to specifyyour own output file name use the output redirection: jad -p example1.class > myexm1.javaOption -d allows you to specify another directory for output files,which are created, by default, in the current directory. For example: jad -o -dtest -sjava *.class (or jad -o -d test -s java *.class, which has the same effect)This command decompiles all .class files in the current directory <
反编译工具jad简单用法 jad 是应用最广泛的java 反编译工具;其本身是命令行工具;其他很多用具是在jad内核的基础上加了一个图形界面;比如我上传的资源、Cavaj Java Decompiler   以下假设jad.exe在c:\java目录下   一、基本用法   Usage: jad [option(s)]   直接输入类文件名,且支持通配符,如下所示。   c:\java\>jad example1.class   c:\java\>jad *.class   结果是将example1.class反编译为example1.jad。将example1.jad改为example1.java即得源文件。   二、Option -o   不提示,覆盖源文件   三、Option -s   c:\java\>jad -sjava example1.class   反编译结果以.java为扩展名。   四、Option -p   将反编译结果输出到屏幕   c:\java\>jad -p example1.class   将反编译结果重定向到文件   c:\java\>jad -p example1.class>example1.java   五、Option -d   指定反编译的输出文件目录   c:\java\>jad -o -dtest -sjava *.class   命令行选择的列表   -a - 用JVM字节格式来注解输出   -af - 同 -a,但是注解的时候用全名称   -clear - 清除所有的前缀   -b - 输出多于的括号 (e.g., if(a) { b(); }, default: no)   -d   - 指定输出文件的文件目录   -dead -试图反编译代码的dead 部分(default: no)   -disass - 不用用字节码的方式反编译 (no JAVA source generated)   -f - 输出整个的名字,无论是类还是方法   -ff -输出类的成员在方法之前 (default: after methods)   -i - 输出所有的变量的缺省的最初值   -l - 将strings分割成指定数目的块的字符 (default: no)   -lnc - 将输出文件用行号来注解 (default: no)   -nl - 分割strings用新行字符 newline character (default: no)   -nodos -不要去检查class文件是否以dos方式写 (CR before NL, default: check)   -nocast - 不要生成辅助文件   -nocode -不要生成方法的源代码   -noconv - 不要转换java的定义符 (default: do)   -noctor - 不允许空的构造器存在   -noinner -关掉对内部类的支持 (default: turn on)   -nolvt - 忽略局部变量的表信息   -nonlb - 不要输出一个新行在打开一个括号之前 (default: do)   -o - 无需确认直接覆盖输出 (default: no)   -p - 发送反编译代码到标准输出 STDOUT (e.g., for piping) 对于很多人说jad反编译后中文显示乱码,其实显示的是unicode字符;jad命令中有可以让中文正常显示的 -8 - 将Unicode字符转换为ANSI字符串,如果输出字符串是中文的话一定要加上这个参数才能正确显示。 最常用的反编译指令如下所示: Jad –d c:\\javasource –s .java -8 javatest.class 这条指令将当前目录下的javatest.class反编译javatest.java并保存在c:\\javasource目录里,其中的提示输出为中文,而不是Unicode代码。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

霸道流氓气质

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值